Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › HARD DISK DRIVE › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255493 HARD DISK DRIVE A

NAVIGATION / MULTI INFO DISPLAY  HARD DISK DRIVE  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 86130A 3.REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

Hide 86271L 5.REMOVE HARD DISC

a.
E250317

Remove the 2 screws.


b.
E250318

Move the cover in the direction of the arrow shown in the illustration to remove it.


c.
E250319

Remove the hard disc in the direction of the arrow shown in the illustration.