These DTCs are stored when a malfunction occurs in the multi-media module receiver assembly.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15A0 | When one of the conditions below is met:
·
Bus malfunction ·
Sub-microprocessor malfunction ·
EEPROM error |
Multi-media module receiver assembly |
| B15AD | When either of the conditions below is met:
·
A short to ground, short to +B or open occurs in the gyro signal circuit ·
Gyro sensor malfunction |
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
NEXT
Recheck for DTCs and check if the same DTCs are output again (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
No DTCs are output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG