This DTC is stored when a malfunction occurs in the multi-display assembly.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15A6 | When one of the conditions below is met:
·
RAM error ·
Drawing controller malfunction ·
Internal hard drive malfunction |
Multi-display assembly |
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
NEXT
Recheck for DTCs and check if the same DTC is output again (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
No DTCs are output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG