This DTC is stored when items controlled by the air conditioning amplifier assembly cannot be customized via the navigation system vehicle customization screen.
The air conditioning amplifier assembly controls the air conditioning system related items that are customizable via the multi-display assembly screen.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15F5 | Air conditioning amplifier assembly vehicle setting processing error. | ·
CAN communication system ·
Air conditioning system ·
Air conditioning amplifier assembly ·
Multi-media module receiver assembly |
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION).
Use the GTS to check if the CAN communication system is functioning normally.
CAN communication DTCs are not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for LHD) | B |
| NG (for RHD) | C |
A
B
C
Check if the air conditioning system is malfunctioning (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the air conditioning system.
No malfunctions are present in the air conditioning system.
OK
NG
Display the "Vehicle Customization" screen.
Make a note of the customizable items for the air conditioning system.
These air conditioning system items shown as customizable via the multi-display assembly vehicle customization screen can also be changed using the GTS. In the following steps, the GTS will be used.
To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the air conditioning system related items that can be customized via the multi-display assembly screen (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>CUSTOMIZE PARAMETERS).
Using the GTS, confirm that it is possible to change the settings of the air conditioning system related customize parameters that are shown as customizable via the multi-display assembly screen.
The items available for customization via the multi-display assembly screen can be customized successfully using the GTS.
OK
NG