Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>PRECAUTION).
If the operation of a cellular phone or the multi-media module receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
Check that the vehicle and cellular phone meet the following conditions:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
The cellular phone is "Bluetooth" compatible (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>SYSTEM DESCRIPTION).
"Bluetooth" setting of the cellular phone is on.
Operating system and software of the cellular phone are the latest versions.
There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
Register the cellular phone again and check if it is registered correctly.
If operation of the cellular phone or multi-media module receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
The cellular phone is registered correctly.
OK
NG
Turn the engine switch off.
Turn the engine switch on (ACC).
Register the cellular phone as a connected device again and check if it is registered correctly.
If operation of the cellular phone or multi-media module receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
The cellular phone is registered correctly.
OK
NG
Place the cellular phone close to the multi-media module receiver assembly.
Register the cellular phone as a connected device again and check if it is registered correctly.
If operation of the cellular phone or multi-media module receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
The cellular phone is registered correctly.
OK
NG
Clear all "Bluetooth" devices registered to the cellular phone and multi-media module receiver assembly.
Register the cellular phone as a connected device again and check if it is registered correctly.
If operation of the cellular phone or multi-media module receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
The cellular phone is registered correctly.
OK
NG
Check if the cellular phone can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
Make sure to obtain the customer's permission to perform this procedure.
After the inspection, clear the registered information and usage history acquired during the inspection.
If operation of the cellular phone or multi-media module receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
The cellular phone is registered correctly.
OK
NG
Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.
Make sure to obtain the customer's permission to perform this procedure.
After the inspection, clear the registered information and usage history acquired during the inspection.
If operation of the cellular phone or multi-media module receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
The cellular phone is registered correctly.
OK
NG