Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA (for Roof Side) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255495 NAVIGATION ANTENNA(for Roof Side) A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA(for Roof Side)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 86760 7.REMOVE NAVIGATION ANTENNA

a.
E161713

Detach the 4 claws and remove the 2 navigation antenna connectors from the protector.


b.
E161714

Detach the 2 claws and remove the protector.


c.
E161715

Disconnect the 2 navigation antenna connectors.


d.
E161267

Remove the navigation antenna nut.


e.
E161268

Detach the 2 claws and remove the navigation antenna.