Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA (for Roof Side) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255495 NAVIGATION ANTENNA(for Roof Side) A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA(for Roof Side)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 86760A 7.REMOVE TELEPHONE ANTENNA ASSEMBLY

a.
E332571

Disconnect the connector.


b.
E332572

Remove the bolt and then remove the washer and holder.


c.
E332573

Remove the telephone antenna assembly of the vehicle outside.


d.
E332574

Detach the claws and guides and remove the telephone antenna assembly as indicated by the arrows in the order shown in the illustration.


e.

When reusing the telephone antenna assembly:

i.
E322706

Remove the seal.