Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
89340A
1.INSTALL CLEARANCE WARNING ECU
w/o Multi-terrain Monitor:
Avoid any impact to the clearance warning ECU.
Do not drop the ECU. If it is dropped, replace it with a new one.
Connect the connector.
Install the clearance warning ECU to the blower unit with the 2 screws.
w/ Multi-terrain Monitor:
Connect the connector.
Attach the claw, guide to install the clearance warning ECU.
Install the 2 screws.
55607
2.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)