Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55607
1.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
89340A
2.REMOVE CLEARANCE WARNING ECU
w/o Multi-terrain Monitor:
Remove the 2 screws and clearance warning ECU.
Disconnect the connector.
w/ Multi-terrain Monitor:
Remove the 2 screws.
Using a clip remover, detach the claw, guide and remove the clearance warning ECU.
Disconnect the connector.