52159
1.REMOVE REAR BUMPER COVER
for Standard:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(for Standard)>REMOVAL).
w/ Towing Hitch:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER (w/ Towing Hitch)>REMOVAL).
w/ Pintle Hook:
(See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(w/ Pintle Hook)>REMOVAL).
89341B
2.REMOVE NO. 2 ULTRASONIC SENSOR
Use the same procedure for both No. 2 ultrasonic sensors.
Disconnect the 4 connectors.
Detach the claw and remove the No. 2 ultrasonic sensor as shown in the illustration.