Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255505 REAR VIEW MONITOR SYSTEM U

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM  TERMINALS OF ECU  


CHECK REAR TELEVISION CAMERA ASSEMBLY


U165782E02
3.5,0.115 3.833,0.344 0.333,0.229 10 false S5

a.

Disconnect the S5 rear television camera assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
S5-3 (CGND) - Body ground BR - Body ground Ground Always Below 1 Ω
S5-4 (CB+) - S5-3 (CGND) B - BR Power source Engine switch on (IG), shift lever in R 5.5 to 7.05 V


c.

Reconnect the S5 rear television camera assembly connector.

HINT:

The blind rear television camera assembly uses waterproof connector. Therefore, voltage cannot be checked with the connector connected to the vehicle.



d.

Measure the waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
S5-2 (CV+) - S5-3 (CGND) R - BR Display signal Engine switch on (IG), shift lever in R Pulse generation (See waveform)
S5-1 (CV-) - S5-3 (CGND) W - BR Rear television camera ground Always Below 1 V


e.

Using an oscilloscope, check waveform.

HINT:
·

The video waveform changes according to the image sent by the rear television camera assembly.

·

A waterproof connector is used for the rear television camera assembly. Therefore, inspect the waveform at the multi-media module receiver assembly with the connector connected.



E349782E02
1.063,2.458 1.208,2.458 1.208,2.458 1.25,1.896 false 1.656,2.427 1.521,2.427 1.521,2.427 1.365,1.802 false 4.583,2.438 4.719,2.438 4.719,2.438 4.781,1.781 false 5.146,2.438 5,2.438 5,2.438 4.896,1.719 false 0.521,0.344 0.833,0.542 0.313,0.198 10 false *a 4.135,0.375 4.448,0.573 0.313,0.198 10 false *b 0.854,2.365 1.167,2.563 0.313,0.198 10 false *c 1.729,2.344 2.042,2.542 0.313,0.198 10 false *d 5.208,2.354 5.521,2.552 0.313,0.198 10 false *d 4.396,2.344 4.708,2.542 0.313,0.198 10 false *c 0.479,1.333 0.792,1.531 0.313,0.198 10 false GND 3.99,1.375 4.302,1.573 0.313,0.198 10 false GND

Text in Illustration
*a Waveform A (camera lens not covered, displaying an image)
*b Waveform B (camera lens covered, blacking out the screen)
*c Synchronization Signal
*d Video Waveform

Waveform
Item Content
Terminal No. (Symbol) S5-2 (CV+) - S5-3 (CGND)
Tool Setting 0.2 V/DIV., 50 μs/DIV.
Condition Waveform A: Engine switch on (IG), shift lever in R and camera lens is not covered, displaying an image
Waveform B: Engine switch on (IG), shift lever in R and camera lens is covered, blacking out the screen