Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › SIDE MONITOR SYSTEM › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255511 SIDE MONITOR SYSTEM D

PARK ASSIST / MONITORING  SIDE MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

This system has a side television camera assembly built into the outer rear view mirror assembly (passenger side and driver side) to display the passenger side and driver side views of the vehicle on the multi-display assembly.


b.

This system consists of the following components:

i.

Outer rear view mirror assembly LH (side television camera assembly)


ii.

Outer rear view mirror assembly RH (side television camera assembly)


iii.

Parking assist ECU


iv.

Multi-media module receiver assembly


v.

Multi-display assembly


vi.

Master cylinder solenoid (skid control ECU assembly)


vii.

Steering sensor


viii.

Steering control ECU*


ix.

Front and side monitor main switch assembly


x.

Outer mirror switch assembly


xi.

Four wheel drive control ECU


xii.

ECM

*: w/ Variable Gear Ratio Steering System




c.

This system is equipped with a self-diagnosis system, which is operated on a designated window that appears on the display panel, just as in the navigation system.



FUNCTION OF COMPONENTS


a.

The parking assist ECU controls the system by using information from the following components.

Item Function
Parking Assist ECU
·

Turns the side television camera assembly on or off based on parameters such as the display settings, the front and side monitor main switch signal, the shift signal and the vehicle speed signal.

·

Transmits the wide view front and side monitor, side monitor, or wide view front monitor signals to the multi-media module receiver assembly based on parameters such as the display settings, the front and side monitor main switch signal, the shift signal and the vehicle speed signal.

·

Depending on the display settings, renders the output display for the wide view front and side monitor, the side monitor, or the wide view front monitor, and outputs them to the screen of the multi-display assembly.

·

With the video feed from the side television camera assembly showing the vehicle's left-side surroundings as a base, uses vehicle information such as the signal from the steering angle sensor to calculate and overlay a composite image and output this to the screen of the multi-display.

·

Renders each configuration page in the diagnosis window and outputs the screen to the multi-display assembly.

·

When the outer mirror retraction signal is received, terminates the side camera collimation/alignment.

·

Stores each configuration setting from the diagnosis window.


Multi-media Module Receiver Assembly Communicates with the parking assist ECU through AVC-LAN communication.
Multi-display Assembly This touch panel display is used to view and interact with the wide view front and side monitor, side view monitor, wide view front monitor, and diagnosis screens.
Side television camera assembly Generates a video feed showing the passenger side of the vehicle and transmits the video to the parking assist ECU.
Front and Side Monitor Main Switch Assembly Operating the switch sends a signal to the parking assist ECU.
Outer Mirror Switch Assembly Transmits outer mirror retraction signal to parking assist ECU.
Steering Sensor Transmits steering angle signal and sensor status signal to multi-display via CAN communication.
Steering Control ECU* Sends the VGRS relative angle and vehicle condition to the parking assist ECU through CAN communication.
Master Cylinder Solenoid (Skid Control ECU Assembly) Sends the inner brake information and ABS ACT information to the parking assist ECU through CAN communication.
Four Wheel Drive Control ECU Sends the L4 condition signal to the parking assist ECU through CAN communication.
ECM Sends the vehicle condition, 2WD/4WD information and shift position information to the parking assist ECU through CAN communication.

*: w/ Variable Gear Ratio Steering System




DISPLAY CONDITIONS FOR SIDE MONITOR DISPLAY


a.

Screen display operation

E349815E01
0.802,0.719 1.042,0.333 1.042,0.333 1.229,0.333 false 6.177,0.333 6.323,0.333 6.323,0.333 6.552,0.729 false 6.167,2.49 6.344,2.49 6.344,2.49 6.531,2.229 false 0.823,2.229 1.073,2.469 1.073,2.469 1.323,2.469 false 0.125,0.052 0.438,0.25 0.313,0.198 10 false *1 0.146,0.313 0.458,0.51 0.313,0.198 10 false *A 1.281,0.25 1.594,0.448 0.313,0.198 10 false *2 3.708,0.344 4.021,0.542 0.313,0.198 10 false *B 5.979,0.24 6.292,0.438 0.313,0.198 10 false *2 5.958,2.417 6.271,2.615 0.313,0.198 10 false *3 1.417,2.385 1.729,2.583 0.313,0.198 10 false *3

Text in Illustration
*A for LHD *B for RHD
*1 Wide View Front and Side Monitor Screen *2 Course guideline display change switch
*3 Automatic display mode set/cancel switch
(Illustration shows automatic display mode off)
- -

i.

After the display conditions are met when the wide view front and side monitor systems are normally functioning, if the screen is changed from the manual display mode or automatic display mode screen, the wide view front and side monitor screen (H4 mode) or wide view front monitor screen (L4 mode) is displayed as the initial screen.

HINT:
·

If the shift lever is not in R and the wide view front and side monitor screen is displayed, the course guideline display change switch and automatic display mode set/cancel switch are displayed and the following operations can be performed.

·

For the course guideline display change switch, refer to the below procedures.

E349830E01
2.906,1.188 3.188,0.521 3.188,0.521 3.417,0.521 false 3.5,0.448 5.99,0.729 2.49,0.281 10 false Course guideline display change switch 0.125,2.292 2.219,2.583 2.094,0.292 10 false Steering linked line display mode 2.604,2.271 4.802,2.698 2.198,0.427 10 false Estimated minimum turning course guideline display screen 5.292,2.25 7.01,2.531 1.719,0.281 10 false No course guidelines mode 0.552,3.271 3.719,3.531 3.167,0.26 10 false : Course guideline display change switch pressed

Side Monitor Screen Display Mode Vehicle Width Parallel Lines (Blue) Estimated Minimum Turning Course Guidelines (Blue) Estimated Course Guidelines (Yellow)
No course guidelines mode Displayed Not Displayed Not Displayed
Estimated minimum turning course guideline display screen Displayed Displayed Not Displayed
Steering linked line display mode Displayed Displayed Displayed

·

Automatic display mode set/cancel switch

Automatic mode display switch
(Indicator in the button)
Display mode
ON
(Illuminated)
Automatic display mode
OFF
(Not illuminated)
Manual display mode

·

The last mode screen is the screen that was displayed last when the screen was changed to the navigation screen, information setting screen, etc.





b.

Display conditions for manual display mode

E252021E07
0.146,0.115 1.219,0.302 1.073,0.188 12 false H4 Mode: 0.635,0.854 2.229,1.052 1.594,0.198 10 false Shift Position in D, N: 4.365,0.781 6.281,1.198 1.917,0.417 10 false Wide view front and side monitor screen (default screen) 5.083,2.094 6.771,2.385 1.688,0.292 10 false Front side monitor screen 0.76,2.115 2.49,2.406 1.729,0.292 10 false Rear side monitor screen 1.115,3.365 2.531,3.615 1.417,0.25 10 false Shift position in D, N 2.99,3 4.115,3.49 1.125,0.49 10 false Current place or shift position in P 0.188,3.75 2.115,4.167 1.927,0.417 10 false Navigation screen or information setting screen 1.344,4.594 2.521,4.792 1.177,0.198 10 false Shift position in R 3,4.438 3.948,4.948 0.948,0.51 10 false Current place or shift position in P 5.094,3.646 6.125,4.063 1.031,0.417 10 false Except shift position in R, P 6.313,3.646 7.156,3.979 0.844,0.333 10 false Shift position in R 0.625,5.406 1.802,5.604 1.177,0.198 10 false Shift Position in R: 0.76,5.823 2.198,6.156 1.438,0.333 10 false Parking assist monitor screen (default screen) 0.656,6.948 2.281,7.135 1.625,0.188 10 false Rear side monitor screen 5.083,6.896 6.708,7.083 1.625,0.188 10 false Front side monitor screen 0.615,8.198 4.625,8.521 4.01,0.323 10 false : Front and side monitor main switch assembly is pressed

U166381E02
0.646,8.188 4.688,8.49 4.042,0.302 10 false : Front and side monitor main switch assembly is pressed 0.083,0.104 0.927,0.365 0.844,0.26 12 false L4 Mode: 0.635,0.844 2.104,1.031 1.469,0.188 10 false Shift Position in D, N: 4.313,0.813 6.292,1.156 1.979,0.344 10 false Wide view front monitor screen (default screen) 2.99,3.021 4.115,3.417 1.125,0.396 10 false Current place or shift position in P 5.135,3.469 6.135,4.188 1,0.719 10 false Except shift position in R, P (Displayed Last Mode Screen) 6.323,3.625 7.146,4.021 0.823,0.396 10 false Shift position in R 3.021,4.458 3.969,5.01 0.948,0.552 10 false Current place or shift position in P 1.396,4.646 2.563,4.917 1.167,0.271 10 false Shift position in R 0.177,3.74 2.219,4.083 2.042,0.344 10 false Navigation screen or information setting screen 0.76,2.094 2.333,2.375 1.573,0.281 10 false Rear side monitor screen 5.073,2.083 6.719,2.313 1.646,0.229 10 false Front side monitor screen 0.76,6.958 2.385,7.26 1.625,0.302 10 false Rear side monitor screen 5.083,6.958 6.792,7.24 1.708,0.281 10 false Front side monitor screen 0.635,5.344 2.104,5.531 1.469,0.188 10 false Shift Position in R: 0.854,5.656 2.323,6.031 1.469,0.375 10 false Parking assist monitor screen (default screen)

i.

H4 mode:

During manual display mode (shift lever in a position other than R), during engine switch on (IG) or engine startup (no DTCs are output), if the following conditions have been met, pressing the front and side monitor main switch will change the display mode as follows

Automatic Mode Display Switch Multi-display Screen Shift Lever Position Vehicle Speed Screen
(changes due to front and side monitor main switch assembly operation)
OFF Navigation screen or information setting screen Other than R 12 km/h (7.5 mph) or less Navigation screen or information setting screen → Wide view front and side monitor screen → Front side monitor screen → Rear side monitor screen → Wide view front and side monitor screen
R position 0 km/h (0 mph) Navigation screen or information setting screen → Parking assist monitor screen → Wide view front and side monitor screen → Front side monitor screen → Rear side monitor screen → Parking assist monitor screen


ii.

L4 mode:

In manual display mode, when the following conditions are met with the engine switch on (IG) or the engine started (no DTCs are output), the screen display can be changed by pressing the front and side monitor main switch assembly.

Automatic Mode Display Switch Multi-display Screen Shift Lever Position Vehicle Speed Screen
(changes due to front and side monitor main switch assembly operation)
OFF Navigation screen or information setting screen Other than R 12 km/h (7.5 mph) or less Navigation screen or information setting screen → Wide view front monitor screen → Front side monitor screen → Rear side monitor screen → Wide view front monitor screen
R position 0 km/h (0 mph) Navigation screen or information setting screen → Parking assist monitor screen → Wide view front and side monitor screen → Front side monitor screen → Rear side monitor screen → Parking assist monitor screen



c.

Screen display timer function

i.

During manual display mode (when the shift lever is not in R), when the front and side monitor main switch is pressed and the following conditions are met, the wide view front and side monitor screen is displayed for a certain period of time even when the vehicle speed is more than 12 km/h (7.5 mph).

E349821E01
2.792,3.729 2.823,3.521 2.823,3.521 2.938,3.521 true 5.125,3.719 5.198,3.573 5.198,3.573 5.333,3.573 true 5.083,1.25 5.271,0.615 5.271,0.615 5.438,0.615 false 0.177,0.125 1.646,0.365 1.469,0.24 12 false H4 Mode: 0.698,0.833 1.781,1.063 1.083,0.229 10 false Vehicle Speed 0.417,1.24 1.719,1.49 1.302,0.25 10 false 12 km/h (7.5 mph) 0.146,2.573 1.469,2.833 1.323,0.26 10 false 8 seconds Timer 0.156,3.25 1.552,3.531 1.396,0.281 10 false 4.5 minutes Timer 0.292,3.896 1.688,4.177 1.396,0.281 10 false Monitor display 0.51,4.698 3.615,4.927 3.104,0.229 10 false : Front and side monitor main switch is pressed 0.521,5.135 2.469,5.406 1.948,0.271 10 false : Monitor screen display time 5.51,0.542 6.802,0.75 1.292,0.208 10 false Canceled Timer 1.969,3.458 2.406,3.667 0.438,0.208 10 false 8 sec. 2.969,3.448 3.406,3.656 0.438,0.208 10 false 8 sec. 5.396,3.5 5.833,3.708 0.438,0.208 10 false 8 sec. 3.906,3.438 4.531,3.698 0.625,0.26 10 false 4.5 min. 1.406,2.458 1.688,2.656 0.281,0.198 10 false On 1.406,2.667 1.688,2.865 0.281,0.198 10 false Off 1.427,3.115 1.708,3.313 0.281,0.198 10 false On 1.427,3.792 1.708,3.99 0.281,0.198 10 false On 1.427,3.323 1.708,3.521 0.281,0.198 10 false Off 1.438,4 1.719,4.198 0.281,0.198 10 false Off 2,3.917 2.229,4.146 0.229,0.229 10 false A 2.75,3.927 2.979,4.156 0.229,0.229 10 false B 4.094,3.917 4.313,4.125 0.219,0.208 10 false C 5.083,3.917 5.302,4.125 0.219,0.208 10 false D

Screen Display Time Time when Front and Side Monitor Main Switch Assembly is Pressed Change in Vehicle Speed Timer Operation Time Note
A
B
12 km/h (7.5 mph) or less 12 km/h (7.5 mph) or less 8 seconds When the front and side monitor main switch assembly is pressed with the vehicle speed at 12 km/h (7.5 mph) or less, the camera screen is displayed for 8 seconds from the moment the switch is pressed. After this, if the vehicle speed increases to above 12 km/h (7.5 mph), the camera screen is not displayed.
C More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) 8 seconds or 4 minutes and 30 seconds When the front and side monitor main switch assembly is pressed while the vehicle speed is more than 12 km/h (7.5 mph), the camera screen is displayed for 4 minutes and 30 seconds the moment the switch is pressed (when the vehicle speed is more than 12 km/h (7.5 mph) after 4 minutes and 30 seconds elapse from the time the switch is pressed).
D More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) → 12 km/h (7.5 mph) or less → More than 12 km/h (7.5 mph) 8 seconds or 4 minutes and 30 seconds When the front and side monitor main switch assembly is pressed while the vehicle speed is more than 12 km/h (7.5 mph), the screen display timer operates and the camera screen is displayed. However, after the vehicle speed decreases to 12 km/h (7.5 mph) or less within 4 minutes and 30 seconds (after 8 seconds have elapsed), if the vehicle speed increases to more than 12 km/h (7.5 mph) again, the screen switches to the navigation or information setting screen.
After the vehicle speed decreases to 12 km/h (7.5 mph) or less within 8 seconds, if the vehicle speed increases to more than 12 km/h (7.5 mph) again, the 4 minutes 30 seconds timer is canceled and the camera screen is displayed for 8 seconds the moment the front and side monitor main switch assembly is pressed.

E245952E12
2.813,2.406 2.875,2.24 2.875,2.24 2.99,2.24 true 5.177,2.417 5.24,2.198 5.24,2.198 5.375,2.198 true 2.25,3.75 2.292,3.563 2.292,3.563 2.458,3.563 true 3.51,3.75 3.563,3.552 3.563,3.552 3.708,3.552 true 5.385,3.75 5.479,3.563 5.479,3.563 5.604,3.563 true 0.115,0.135 1.583,0.375 1.469,0.24 12 false L4 Mode: 1.458,2.167 1.927,2.344 0.469,0.177 10 true 8 sec. 0.677,0.833 1.604,1.042 0.927,0.208 10 false Vehicle Speed 0.458,1.25 2.042,1.458 1.583,0.208 10 false 12 km/h (7.5 mph) 3.063,2.167 3.521,2.333 0.458,0.167 10 true 8 sec. 4.115,2.146 4.677,2.323 0.563,0.177 10 true 4.5 min. 5.438,2.125 6.094,2.281 0.656,0.156 10 true 8 sec. 1.448,2.469 1.656,2.646 0.208,0.177 10 true On 1.438,2.688 1.75,2.865 0.313,0.177 10 false Off 1.469,3.156 1.677,3.333 0.208,0.177 10 true On 1.458,3.365 1.771,3.542 0.313,0.177 10 false Off 1.448,3.823 1.656,4 0.208,0.177 10 true On 1.448,4.021 1.76,4.198 0.313,0.177 10 false Off 0.104,2.563 1.396,2.74 1.292,0.177 10 false H4 Monitor Display 0.063,3.25 1.573,3.49 1.51,0.24 10 false MTM 8 seconds Timer 0.167,3.896 1.5,4.146 1.333,0.25 10 false L4 Monitor Display 1.99,2.615 2.146,2.792 0.156,0.177 10 false A 2.771,2.615 2.927,2.792 0.156,0.177 10 false B 4.083,2.604 4.24,2.781 0.156,0.177 10 false C 5.104,2.615 5.26,2.792 0.156,0.177 10 false D 2.521,3.49 2.938,3.688 0.417,0.198 10 true 8 sec. 5.344,3.938 5.531,4.156 0.188,0.219 10 false G 3.458,3.958 3.615,4.135 0.156,0.177 10 false F 2.177,3.948 2.333,4.125 0.156,0.177 10 false E 0.531,4.74 4.927,4.958 4.396,0.219 10 false : Front and side monitor main switch is pressed 0.552,5.198 3.99,5.469 3.438,0.271 10 false : Monitor screen display time 3.792,3.49 4.302,3.708 0.51,0.219 10 true 8 sec. 5.688,3.49 6.198,3.698 0.51,0.208 10 true 8 sec.

Screen Display Time Time when Front and Side Monitor Main Switch Assembly is Pressed Change in Vehicle Speed Timer Operation Time Note
A
B
12 km/h (7.5 mph) or less 12 km/h (7.5 mph) or less 8 seconds When the front and side monitor main switch assembly is pressed with the vehicle speed at 12 km/h (7.5 mph) or less, the camera screen is displayed for 8 seconds from the moment the switch is pressed. After this, if the vehicle speed increases to above 12 km/h (7.5 mph), the camera screen is not displayed.
C More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) 8 seconds or 4 minutes and 30 seconds When the front and side monitor main switch assembly is pressed while the vehicle speed is more than 12 km/h (7.5 mph), the camera screen is displayed for 4 minutes and 30 seconds the moment the switch is pressed (when the vehicle speed is more than 12 km/h (7.5 mph) after 4 minutes and 30 seconds elapse from the time the switch is pressed).
D More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) → 12 km/h (7.5 mph) or less → More than 12 km/h (7.5 mph) 8 seconds or 4 minutes and 30 seconds When the front and side monitor main switch assembly is pressed while the vehicle speed is more than 12 km/h (7.5 mph), the screen display timer operates and the camera screen is displayed. However, after the vehicle speed decreases to 12 km/h (7.5 mph) or less within 4 minutes and 30 seconds (after 8 seconds have elapsed), if the vehicle speed increases to more than 12 km/h (7.5 mph) again, the screen switches to the navigation or information setting screen.
After the vehicle speed decreases to 12 km/h (7.5 mph) or less within 8 seconds, if the vehicle speed increases to more than 12 km/h (7.5 mph) again, the 4 minutes 30 seconds timer is canceled and the camera screen is displayed for 8 seconds the moment the front and side monitor main switch assembly is pressed.
E
F
G
More than 12 km/h (7.5 mph) More than 12 km/h (7.5 mph) 8 seconds If the vehicle speed is more than 12 km/h (7.5 mph), the camera screen is displayed for 8 seconds. After that, the camera screen is not displayed. The timer is canceled the moment the vehicle speed decreases to below 12 km/h (7.5 mph) during the 8 second timer.



d.

Display conditions for automatic display mode

i.

In automatic display mode, the screen display is automatically displayed according to driving conditions when the following conditions are met and the wide view front and side monitor systems are normally operating.

E349822E01
0.177,4.896 6.594,5.313 6.417,0.417 10 false *1: When the vehicle speed changes to 10 km/h (6.2 mph) or more (for L4 mode, after the vehicle speed reaches 12 km/h (7.5 mph), the camera screen is displayed for 8 seconds and then the screen changes). 0.156,5.542 6.979,6.083 6.823,0.542 10 false *2: When the vehicle speed changes from below 12 km/h (7.5 mph) to 12 km/h (7.5 mph) or more (for L4 mode, after the vehicle speed reaches 12 km/h (7.5 mph) the camera screen is displayed for 8 seconds and then the screen changes). 0.198,6.448 5.25,6.677 5.052,0.229 10 false *3: When the shift position is changed from P or R to a position other than P or R. 0.146,0.125 1.813,0.354 1.667,0.229 12 false Shift Position in D, N: 0.302,0.406 2.229,0.792 1.927,0.385 10 false Wide view front and side monitor screen (default screen) 4.729,0.458 6.646,0.698 1.917,0.24 10 false Wide view front monitor screen 0.125,1.375 1.104,1.76 0.979,0.385 10 false Rear side monitor screen 5.073,1.604 6.729,1.865 1.656,0.26 10 false Front side monitor screen 0.948,2.365 2.563,2.771 1.615,0.406 10 false Shift position in D or N, press the current place 0.177,3.219 2.104,3.729 1.927,0.51 10 false Navigation screen or information setting screen 4.344,2.74 4.656,2.938 0.313,0.198 10 false *1 4.677,2.74 4.99,2.938 0.313,0.198 10 false *2 5.021,2.75 5.333,2.948 0.313,0.198 10 false *3 0.615,4.594 4.365,4.813 3.75,0.219 10 false : Front and side monitor main switch assembly is pressed

Vehicle Condition Multi-display Assembly Display Screen Shift Lever Vehicle Speed Display Screen
Stopped → Driving Navigation screen or information setting screen Not in P or R 12 km/h (7.5 mph) or less Navigation screen or information setting screen → Wide view front monitor and side monitor screen*
Driving → Stopped Not in P or R 10 km/h (6.2 mph) or less Navigation screen or information setting screen → Wide view front monitor and side monitor screen*

*:The conditions to change the screen after the display screen changes automatically are the same as in manual display mode.




e.

Off-road turn assist function

i.
E349826E01
1,1.865 1.25,1.865 1.25,1.865 1.313,1.594 true 2.438,1.896 2.229,1.896 2.229,1.896 2.104,1.594 true 2.521,1.792 2.833,1.99 0.313,0.198 10 false *a 0.781,1.781 1.094,1.979 0.313,0.198 10 false *a

With the off-road turn assist function on, the path traveled is displayed as dotted lines on the front screen. In this state, the vehicle may not move exactly as the front lines indicate. (The lines indicate the direction the front wheels are turned. However, with the off-road assist function on, the vehicle turns using a difference in drive force between the left and right wheels.)

Text in Illustration
*a Line Indicating Travel Path




OPERATION EXPLANATION


a.

The front and side monitor main switch ON signal is sent from the main switch to the parking assist ECU.

After receiving the front and side monitor main switch ON signal, the parking assist ECU switches the display signal for the display and navigation module display from the navigation system to the side monitor system.



COMMUNICATION SYSTEM OUTLINE


a.

The components of the side monitor system communicate with each other through the AVC-LAN. If a short circuit or open circuit occurs in the AVC-LAN, communication is interrupted and the side monitor system will stop functioning.



DIAGNOSTIC FUNCTION OUTLINE


a.

This side monitor system has a diagnostic function displayed in the parking assist ECU. This function enables the calibration (adjustment and confirmation) of the system (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>SIDE MONITOR SYSTEM>CALIBRATION).


b.

The system can check the following items by using the intelligent tester.

Item Proceed to
DTC (Click here)