Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR CROSS TRAFFIC ALERT BUZZER › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255513 REAR CROSS TRAFFIC ALERT BUZZER A

PARK ASSIST / MONITORING  REAR CROSS TRAFFIC ALERT BUZZER  REMOVAL  


PROCEDURE

Hide 64910J 1.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 2.REMOVE REAR NO. 2 SEAT ASSEMBLY RH (w/ Rear No. 2 Seat)

Hide 67917C 4.REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedures described for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>REMOVAL).


Hide 71845B 6.REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat)

HINT:

Use the same procedures described for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>REMOVAL).


Hide 62510P 7.REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

HINT:

Use the same procedures described for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>REMOVAL).


Hide 62471D 8.REMOVE REAR UPPER PILLAR GARNISH RH

HINT:

Use the same procedures described for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>REMOVAL).


Hide 89747F 9.REMOVE BLIND SPOT MONITOR BUZZER

a.
B420971

Using a clip remover, detach the clamp and remove the blind spot monitor buzzer.


b.

Disconnect the connector.