Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MULTI-TERRAIN MONITOR SYSTEM › 2015.08–2017.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255515 MULTI-TERRAIN MONITOR SYSTEM D

PARK ASSIST / MONITORING  MULTI-TERRAIN MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

This system has front, passenger side, driver side and rear television camera assemblies mounted around the vehicle to display around the vehicle on the multi-display assembly*1 or radio and display receiver assembly*2. The display panel also shows a composite view consisting of the area behind the vehicle and parking guidelines to assist the driver in parking the vehicle by monitoring the area around the vehicle.

*1: for Multi-media Module Receiver Type

*2: for Radio and Display Type



b.

This system consists of the following components:

i.

Parking assist ECU


ii.

Main switch assembly (multi-terrain monitor main switch)


iii.

Rear television camera assembly


iv.

Front television camera assembly


v.

Side television camera assembly LH


vi.

Side television camera assembly RH


vii.

Multi-media module receiver assembly*1


viii.

Multi-display assembly*1


ix.

Radio and display receiver assembly*2


x.

Steering sensor


xi.

Brake actuator assembly (skid control ECU)


xii.

Main body ECU (multiplex network body ECU)


xiii.

Clearance warning ECU assembly


xiv.

ECM


xv.

Steering control ECU


xvi.

4WD control ECU


xvii.

Airbag sensor assembly


xviii.

Blind spot monitor sensor LH*3

*1: for Multi-media Module Receiver Type

*2: for Radio and Display Type

*3: w/ Blind Spot Monitor System




c.

This system is equipped with a self-diagnosis system, which is operated from a designated window that appears on the display panel, just as in the navigation system.



FUNCTION OF COMPONENTS


a.

The parking assist ECU controls the system by using information from the following components.

E424649E01
0.094,0.719 2.344,1.063 2.25,0.344 10 false Main Switch Assembly (Multi-terrain Monitor Main Switch) 4.479,0.896 7.125,1.24 2.646,0.344 10 false Multi-media Module Receiver Assembly*1 4.271,1.344 4.479,1.604 0.208,0.26 10 false *1 4.479,1.198 7.01,1.542 2.531,0.344 10 false Radio and Display Receiver Assembly*2 5.177,2.167 6.792,2.51 1.615,0.344 10 false Multi-display Assembly*1 5.375,3.115 6.5,3.292 1.125,0.177 10 false Steering Sensor 4.615,5.344 7.021,5.729 2.406,0.385 10 false Master Cylinder Solenoid (Skid Control ECU) 4.844,6.573 7.063,6.948 2.219,0.375 10 false Main Body ECU (Multiplex Network Body ECU) 4.833,7.813 7.031,8.156 2.198,0.344 10 false Clearance Warning ECU Assembly 5.781,4.208 6.146,4.552 0.365,0.344 10 false ECM 0.125,2.458 2.375,2.802 2.25,0.344 10 false Front Television Camera Assembly 0.042,3.906 2.427,4.25 2.385,0.344 10 false Side Television Camera Assembly LH 0.01,5.344 2.396,5.688 2.385,0.344 10 false Side Television Camera Assembly RH 0.104,6.813 2.49,7.156 2.385,0.344 10 false Rear Television Camera Assembly 2.823,8.177 5.458,8.406 2.635,0.229 10 false *1: for Multi-media Module Receiver Type 2.833,8.51 5.458,8.708 2.625,0.198 10 false *2: for Radio and Display Type 2.792,6.938 4.042,7.281 1.25,0.344 10 false Parking Assist ECU 0.76,7.646 2.26,7.99 1.5,0.344 10 false : GVIF Cable 0.75,8.031 2.604,8.375 1.854,0.344 10 false : CAN Communication Line 0.76,8.479 2.865,8.823 2.104,0.344 10 false : AVC-LAN Communication Line 4.188,2.24 4.448,2.542 0.26,0.302 10 false *1

E339451E05
5.146,0.99 6.573,1.26 1.427,0.271 10 false Steering Control ECU 5.01,2.26 6.448,2.542 1.438,0.281 10 false 4WD Control ECU 4.969,3.51 7.052,3.833 2.083,0.323 10 false Airbag Sensor Assembly 4.948,4.76 6.948,5.083 2,0.323 10 false Blind Spot Monitor Sensor LH* 0.156,4.5 3.031,4.844 2.875,0.344 10 false *: w/ Blind Spot Monitor System 0.719,5.198 3.167,5.479 2.448,0.281 10 false : CAN Communication Line

Item Function
Rear Television Camera Assembly
·

Mounted on the back door to transmit the rear view of the vehicle to the parking assist ECU.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens


Front Television Camera Assembly Generates a video feed showing the front side of the vehicle and transmits the video to the parking assist ECU
Side Television Camera Assembly LH Generates a video feed showing the left side of the vehicle and transmits the video to the parking assist ECU
Side Television Camera Assembly RH Generates a video feed showing the right side of the vehicle and transmits the video to the parking assist ECU
Parking Assist ECU
·

Turns the multi-terrain monitor system ON and OFF according to the display conditions, based on the received main switch assembly (multi-terrain monitor main switch) signals, shift position signals, and vehicle speed signals

·

Sends the display request signals for the panoramic view and wide front view screen, two-side view screen, panoramic view and rear view screen, or moving view screen to the radio receiver assembly according to the display conditions, based on the received main switch assembly (multi-terrain monitor main switch) signals, shift position signals, and vehicle speed signals

·

Sends the display switching request signals for the panoramic view and wide front view screen, two-side view screen, panoramic view and rear view screen, or moving view screen to the radio receiver assembly according to the display conditions, based on the received outer mirror retraction signals

·

Displays the composite image of the surrounding area images taken by each camera and the image calculated from vehicle status information such as the steering angle signals on the multi-display screen

·

Renders each configuration page in the diagnosis window and outputs the screen to the multi-display assembly

·

Stops displaying the buttons and guidelines on the panoramic view and rear view monitor screen when the screen is being displayed and a back door open status signal is received

·

Stores each configuration setting from the diagnosis window


Main Switch Assembly (multi-terrain monitor main switch) Sends switch operation signals to the parking assist ECU
·

Multi-media Module Receiver Assembly*1

·

Radio and Display Receiver Assembly*2


Allows touch panel operations when the multi-terrain monitor screen or diagnosis screen is displayed
Steering Sensor Sends the steering angle signals and sensor status signals to the parking assist ECU via the CAN communication system
Master Cylinder Solenoid (Skid Control ECU) Sends the vehicle speed signals, drive type signals, and system status signals to the parking assist ECU via the CAN communication system
ECM
·

Sends the engine model signals, and system status signals to the parking assist ECU via the CAN communication system

·

Sends the shift position signals to the parking assist ECU via the CAN communication system


Main Body ECU (Multiplex Network Body ECU)
·

Sends the back door courtesy light switch signal to the parking assist ECU via the CAN communication system

·

Sends the mirror retract request signal to the parking assist ECU via the CAN communication system


Clearance Warning ECU Assembly Sends information from each sonar via the CAN communication system
Master Cylinder Solenoid (Skid Control ECU) Sends vehicle speed signals to the parking assist ECU via CAN communication.
4WD Control ECU Sends L4 condition signals to the parking assist ECU via CAN communication.
Airbag Sensor Assembly Sends acceleration sensor information to the parking assist ECU via CAN communication.
Steering Control ECU Sends VGRS relative angle signals to the parking assist ECU via CAN communication.
Blind Spot Monitor Sensor LH*3 Sends RCTA operation condition signals to the parking assist ECU via CAN communication (w/ RCTA).

*1: for Multi-media Module Receiver Type

*2: for Radio and Display Type

*3: w/ Blind Spot Monitor System




Multi-terrain Monitor Screen Display


a.

Panoramic view and wide front view screen

E339546E01
0.518,0.488 0.721,0.696 0.203,0.208 10 *a 0.422,1.093 0.625,1.300 0.203,0.208 10 1 3.037,0.435 3.241,0.642 0.203,0.208 10 1 3.229,0.866 3.433,1.074 0.203,0.208 10 1 3.255,1.157 3.458,1.364 0.203,0.208 10 2 3.885,0.488 4.089,0.696 0.203,0.208 10 *b 2.855,0.882 2.941,0.488 2.941,0.488 3.014,0.488 false 2.89,0.924 3.21,0.924 false 6.408,0.435 6.611,0.642 0.203,0.208 10 1 6.6,0.866 6.804,1.074 0.203,0.208 10 1 6.226,0.882 6.312,0.488 6.312,0.488 6.384,0.488 false 6.261,0.924 6.581,0.924 false 2.912,1.226 3.219,1.226 false 1.3,1.512 1.155,1.176 1.155,1.176 0.514,1.176 false 1.155,1.576 1.155,1.176 false 3.789,1.093 3.993,1.300 0.203,0.208 10 1 4.668,1.512 4.522,1.176 4.522,1.176 3.881,1.176 false 4.522,1.576 4.522,1.176 false

Text in Illustration
*a Estimated course line display mode *b Distance guide line display mode

Panoramic View and Wide Front View Screen Description
Signal Name Color Panoramic View and Wide Front View Screen
Estimated course line display mode Distance guide line display mode
(1) Front distance guide line Blue Displayed Displayed
(2) Front wheel ground contact line Yellow Displayed Not displayed


b.

Two-side view screen description

E339547E03
2.24,1.313 2.771,0.521 2.771,0.521 2.854,0.521 true 2.292,1.448 3.219,1.448 true 2.219,1.573 2.469,2.281 2.469,2.281 2.573,2.281 true 5.656,1.313 6.177,0.521 6.177,0.521 6.26,0.521 true 5.698,1.438 6.615,1.438 true 5.656,1.594 5.906,2.302 5.906,2.302 6,2.302 true 0.49,0.458 0.74,0.646 0.25,0.188 10 false *a 2.938,0.427 3.188,0.615 0.25,0.188 10 false 1 3.281,1.365 3.531,1.552 0.25,0.188 10 false 3 2.635,2.198 2.885,2.385 0.25,0.188 10 false 2 3.865,0.458 4.115,0.646 0.25,0.188 10 false *b 6.313,0.396 6.563,0.583 0.25,0.188 10 false 1 6.656,1.354 6.906,1.542 0.25,0.188 10 false 3 6.063,2.219 6.313,2.406 0.25,0.188 10 false 2

Text in Illustration
*a Estimated course line display mode *b Distance guide line display mode

Two-side View Screen Description
Signal Name Color
(1) Front distance guide line Red/Black
(2) Front wheel ground contact line Blue
(3) Vehicle width parallel line Blue Blue


c.

Panoramic view and rear view screen

E339548E03
1.979,1.073 2.198,1.073 false 2.573,1.281 3.021,1.281 false 1.76,0.906 1.573,0.344 1.573,0.344 1.479,0.344 false 1.719,0.927 1.563,0.51 1.563,0.51 1.479,0.51 false 4.073,0.906 3.885,0.344 3.885,0.344 3.802,0.344 false 3.135,1.156 2.948,0.51 2.948,0.51 2.865,0.51 false 4.042,0.938 3.885,0.521 3.885,0.521 3.792,0.521 false 0.542,1.75 0.49,1.958 0.49,1.958 0.406,1.958 false 2.865,1.76 2.823,1.969 2.823,1.969 2.74,1.969 false 5.188,1.76 5.146,1.969 5.146,1.969 5.063,1.969 false 1.792,1.76 1.792,2.354 false 1.875,1.542 1.948,1.979 1.948,1.979 2.021,1.979 false 4.146,1.542 4.208,1.979 4.208,1.979 4.281,1.979 false 6.396,0.906 6.219,0.344 6.219,0.344 6.125,0.344 false 6.365,0.938 6.208,0.521 6.208,0.521 6.115,0.521 false 6.469,1.552 6.531,1.99 6.531,1.99 6.615,1.99 false 0.813,1.198 0.635,1.031 0.635,1.031 0.26,1.031 false 0.927,1.365 0.76,2.198 0.76,2.198 0.667,2.198 false 3.26,1.375 3.094,2.208 3.094,2.208 3,2.208 false 1.198,1.417 1.292,2.406 1.292,2.406 1.385,2.406 false 3.521,1.427 3.615,2.396 3.615,2.396 3.698,2.396 false 5.833,1.438 5.927,2.406 5.927,2.406 6.01,2.406 false 1.167,1.26 1,2.521 1,2.521 0.917,2.521 false 1.24,1.438 1.385,2.063 1.385,2.063 1.448,2.063 false 0.146,0.542 0.354,0.729 0.208,0.188 10 false *a 0.24,1.875 0.448,2.063 0.208,0.188 10 false *d 1.365,0.25 1.573,0.438 0.208,0.188 10 false 1 2.729,0.417 2.938,0.604 0.208,0.188 10 false 4 1.365,0.427 1.573,0.615 0.208,0.188 10 false 1 2.26,0.99 2.469,1.177 0.208,0.188 10 false 6 0.115,0.948 0.323,1.135 0.208,0.188 10 false 7 0.542,2.125 0.75,2.313 0.208,0.188 10 false 8 1.771,2.385 1.979,2.573 0.208,0.188 10 false 7 2.063,1.875 2.271,2.063 0.208,0.188 10 false 2 1.427,2.323 1.635,2.51 0.208,0.188 10 false 2 1.5,1.979 1.708,2.167 0.208,0.188 10 false 5 0.802,2.427 1.01,2.615 0.208,0.188 10 false 3 2.448,1.198 2.656,1.385 0.208,0.188 10 false 3 2.448,0.542 2.656,0.729 0.208,0.188 10 false *b 4.792,0.542 5,0.729 0.208,0.188 10 false *c 3.688,0.25 3.896,0.438 0.208,0.188 10 false 1 3.688,0.448 3.896,0.635 0.208,0.188 10 false 1 2.573,1.865 2.781,2.052 0.208,0.188 10 false *d 4.885,1.885 5.094,2.073 0.208,0.188 10 false *d 4.323,1.875 4.531,2.063 0.208,0.188 10 false 2 6.021,0.26 6.229,0.448 0.208,0.188 10 false 1 6.01,0.448 6.219,0.635 0.208,0.188 10 false 1 6.677,1.906 6.885,2.094 0.208,0.188 10 false 2 2.865,2.135 3.073,2.323 0.208,0.188 10 false 8 3.76,2.281 3.969,2.469 0.208,0.188 10 false 2 6.083,2.313 6.292,2.5 0.208,0.188 10 false 2

Text in Illustration
*a Estimated course line display mode *b Parking guide line display mode
*c Distance guide line display mode *d Guide line display mode switching button

HINT:

In the rear view screen, the screen display mode can be switched by pressing the guide line display mode switching button or rear view screen on the screen.


Panoramic View and Rear View Screen Description
Signal Name Color Panoramic View and Rear View Screen
Estimated course line display mode Parking guide line display mode Distance guide line display mode
(1) Front distance guide line Blue Displayed Displayed Displayed
(2) Rear distance guide line Red/Black Displayed Displayed Displayed
(3) Rear vehicle width extension line Blue Displayed Displayed Not displayed
(4) Parking guide line Blue Not displayed Displayed Not displayed
(5) Rear distance guide line Blue Displayed Not displayed Not displayed
(6) Side estimated course line Yellow Displayed Not displayed Not displayed
(7) Rear estimated course line Yellow Displayed Not displayed Not displayed
(8) Vehicle center line Blue Displayed Displayed Not displayed


d.

Rear view screen

E339549E03
0.552,1.906 0.5,2.333 0.5,2.333 0.396,2.333 false 2.854,1.906 2.792,2.333 2.792,2.333 2.698,2.333 false 5.167,1.906 5.104,2.333 5.104,2.333 5.01,2.333 false 1.24,1.458 1.448,2.365 1.448,2.365 1.521,2.365 true 3.573,1.458 3.375,2.354 3.375,2.354 3.292,2.354 true 1.552,1.521 1.719,2.052 1.719,2.052 1.771,2.052 true 1.479,1.542 1.615,2.177 1.615,2.177 1.667,2.177 true 5.979,1.563 5.979,2.167 true 3.865,1.531 3.865,2.104 true 1.104,1.281 1.281,0.531 1.281,0.531 1.354,0.531 true 1.531,1.385 1.76,0.646 1.76,0.646 1.823,0.646 true 3.365,1.198 3.458,0.563 3.458,0.563 3.531,0.563 true 0.146,0.24 0.417,0.49 0.271,0.25 10 false *a 0.208,2.24 0.479,2.49 0.271,0.25 10 false *d 2.469,0.292 2.74,0.542 0.271,0.25 10 false *b 4.813,0.323 5.083,0.573 0.271,0.25 10 false *c 2.49,2.24 2.76,2.49 0.271,0.25 10 false *d 1.573,2.292 1.844,2.542 0.271,0.25 10 false 6 1.844,1.979 2.021,2.146 0.177,0.167 10 false 1 1.896,0.552 2.073,0.719 0.177,0.167 10 false 2 3.615,0.5 3.792,0.667 0.177,0.167 10 false 3 1.719,2.104 1.896,2.271 0.177,0.167 10 false 4 1.427,0.438 1.604,0.604 0.177,0.167 10 false 5 3.823,2.146 4,2.313 0.177,0.167 10 false 1 5.938,2.208 6.115,2.375 0.177,0.167 10 false 1 4.833,2.25 5.104,2.5 0.271,0.25 10 false *d 3.167,2.271 3.438,2.521 0.271,0.25 10 false 6

Text in Illustration
*a Estimated course line display mode *b Parking guide line display mode
*c Distance guide line display mode *d Guide line display mode switching button

HINT:

The screen changes to the panoramic view and rear view screen when the display mode switch button or rear view screen is selected.


Panoramic View and Rear View Screen Description
Signal Name Color Rear View Screen
Estimated course line display mode Parking guide line display mode Distance guide line display mode
(1) Rear distance guide line Red/Black Displayed Displayed Displayed
(2) Rear vehicle width extension line Blue Displayed Displayed Not displayed
(3) Parking guide line Blue Not displayed Displayed Not displayed
(4) Rear distance guide line Blue Displayed Not displayed Not displayed
(5) Rear estimated course line Yellow Displayed Not displayed Not displayed
(6) Vehicle center line Blue Displayed Displayed Not displayed


e.

Side view screen

E339550E03
2.573,1.021 2.708,0.427 2.708,0.427 2.813,0.427 true 2.615,1.323 2.906,0.927 2.906,0.927 3.198,0.927 true 2.688,1.615 3.198,1.615 true 2.594,1.969 2.594,2.219 true 5.927,1.021 6.063,0.427 6.063,0.427 6.156,0.427 true 5.958,1.323 6.26,0.927 6.26,0.927 6.552,0.927 true 6.031,1.625 6.552,1.625 true 5.938,1.969 5.938,2.219 true 0.281,0.188 0.552,0.406 0.271,0.219 10 false *a 2.875,0.344 3.031,0.521 0.156,0.177 10 false 1 3.271,0.844 3.427,1.021 0.156,0.177 10 false 2 3.26,1.531 3.417,1.708 0.156,0.177 10 false 3 2.563,2.271 2.719,2.448 0.156,0.177 10 false 4 6.198,0.333 6.354,0.51 0.156,0.177 10 false 1 6.604,0.833 6.76,1.01 0.156,0.177 10 false 2 6.604,1.542 6.76,1.719 0.156,0.177 10 false 3 5.906,2.26 6.063,2.438 0.156,0.177 10 false 4 3.813,0.219 4.083,0.438 0.271,0.219 10 false *b

Text in Illustration
*a Estimated course line display mode *b Parking guide line display mode

Side View Screen Description
Signal Name Color
(1) Front wheel ground contact line Blue
(2) Rear wheel ground contact line Blue
(3) Vehicle width parallel line Blue

HINT:

Refer to the content of panoramic view and rear view screen and panoramic view and wide front view screen for information about the rear view and wide front view screens.




Multi-terrain Monitor Screen Description (ON LOAD)


a.

Manual display mode

i.

When the main switch assembly (multi-terrain monitor main switch) is pressed with the engine switch on (IG) or the engine started, the multi-terrain monitor system switches to a screen shown below according to the shift lever position

E339551E03
0.427,0.604 0.677,0.792 0.25,0.188 10 false *a 0.406,5.396 0.656,5.583 0.25,0.188 10 false *b 1.208,6.781 1.458,6.969 0.25,0.188 10 false *f 1.208,8.333 1.458,8.521 0.25,0.188 10 false *g 5.771,7.542 6.021,7.729 0.25,0.188 10 false *c 5.854,2.083 6.104,2.271 0.25,0.188 10 false *d 3.677,3.906 3.927,4.094 0.25,0.188 10 false *e 3.406,1.063 3.552,1.271 0.146,0.208 10 false 1 4.552,2.052 4.698,2.26 0.146,0.208 10 false 1 1.667,2.625 1.813,2.833 0.146,0.208 10 false 4 1.177,3.729 1.323,3.938 0.146,0.208 10 false 4 0.49,3.729 0.635,3.938 0.146,0.208 10 false 2 1.688,4.771 1.833,4.979 0.146,0.208 10 false 2 2.313,4.771 3.021,4.979 0.708,0.208 10 false 3 or 5 2.313,2.719 3.021,2.927 0.708,0.208 10 false 5 or 6 3.521,6.469 3.667,6.677 0.146,0.208 10 false 1 3.521,7.396 3.667,7.604 0.146,0.208 10 false 1 1.74,6.917 1.885,7.125 0.146,0.208 10 false 7 0.74,6.906 0.885,7.115 0.146,0.208 10 false 8

Text in Illustration
*a Shift lever not in P or R *b Shift lever in R
*c Panoramic view and wide front view screen *d Two-side view screen
*e Navigation screen, etc. *f Panoramic view and rear view screen
*g Wide rear view screen - -

Screen Transition Conditions
No. Screen Transition Conditions
(1) Main switch assembly (multi-terrain monitor main switch) is pressed
(2) Shift lever is moved to R
(3) Shift lever is moved to other than P or R
(4) Shift lever is moved to other than P or R and operation (1) is performed
(5) "MAP/VOICE" switches, etc. on the multi-display are pressed
(6) Shift lever is moved to P
(7) Switch image mode button or rear view screen is selected
(8) Switch image mode button or wide rear view screen is selected

HINT:

If the panoramic view monitor main switch is pressed at a vehicle speed of approximately 20 km/h (12 mph) or lower, the panoramic view monitor system screen is displayed. If the vehicle speed exceeds approximately 20 km/h (12 mph), the display switches to the navigation screen or information settings screen.




b.

Screen transition chart (automatic display mode)

i.

When the shift lever is not in P or R, in addition to switching screens by pressing the No. 2 combination switch assembly (panoramic view monitor main switch), the automatic display mode can be selected by pressing the automatic display mode switching button.

E339552E03
0.979,2.052 0.938,2.271 0.938,2.271 0.865,2.271 false 4.333,2.052 4.281,2.271 4.281,2.271 4.219,2.271 false 0.219,0.198 0.646,0.458 0.427,0.26 10 false *a 3.813,0.208 4.24,0.469 0.427,0.26 10 false *b 0.677,2.188 0.875,2.365 0.198,0.177 10 false *c 4.021,2.177 4.219,2.354 0.198,0.177 10 false *c

Text in Illustration
*a Panoramic view and wide front view screen *b Two-side view screen
*c Automatic display mode - -

Automatic Display Mode Switching Button
(Indicator in Button)
Screen Switching Mode
ON
(Illuminated)
Automatic display mode
OFF
(Not illuminated)
Manual display mode

HINT:
·

In the automatic display mode, press the main switch assembly (multi-terrain monitor main switch) or panel switch to switch screens in the same way as the manual display mode.

·

When switching to the navigation screen, etc. in the automatic display mode, the display switches to the screen that was displayed last. However, the display switches to the panoramic view and wide front view screen if the shift lever is not in P or R after the engine switch is turned from off to on (IG).




ii.

The automatic display mode automatically switches the display according to the vehicle status.

E339553E01
0.036,0.02 0.263,0.182 0.227,0.162 10 *a 3.568,1.24 3.795,1.402 0.227,0.162 10 1 1.032,2.429 1.259,2.591 0.227,0.162 10 1 5.384,3.975 5.611,4.137 0.227,0.162 10 1 4.522,3.489 4.749,3.652 0.227,0.162 10 4 3.619,3.052 3.846,3.214 0.227,0.162 10 3 2.312,2.429 2.539,2.591 0.227,0.162 10 2 1.627,1.883 1.854,2.045 0.227,0.162 10 *b 1.627,4.469 1.854,4.631 0.227,0.162 10 *d 5.456,1.883 5.683,2.045 0.227,0.162 10 *c

Text in Illustration
*a Shift lever not in P or R *b Panoramic view and wide front view screen
*c Two-side view screen *d Navigation screen, etc.

Screen Transition Conditions (Automatic Display Mode)
No. Screen Transition Conditions
(1) Main switch assembly (multi-terrain monitor main switch) is pressed
(2) Current location switches, etc. on the multi-display are pressed
(3) Vehicle speed changes from above approximately 10 km/h (6 mph) to approximately 10 km/h (6 mph) or lower. The screen that was last displayed is displayed on the multi-display.*
(4) Vehicle speed changes from approximately 12 km/h (7 mph) or lower to above approximately 12 km/h (7 mph)

*: The panoramic view and wide front view screen is the first screen displayed after the engine switch was turned off.




c.

When the outer rear view mirror assembly is retracted

i.

When the outer rear view mirrors are retracted, the screen changes according to the current screen display, as follows.

E339554E02
0.156,0.104 0.521,0.385 0.365,0.281 10 false *a 3.438,1 3.604,1.198 0.167,0.198 10 false 1 3.438,2.479 3.656,2.729 0.219,0.25 10 false 1 3.438,3.948 3.604,4.146 0.167,0.198 10 false 1 0.156,1.583 0.521,1.865 0.365,0.281 10 false *b 0.156,3.063 0.521,3.344 0.365,0.281 10 false *c 4.49,0.115 4.854,0.396 0.365,0.281 10 false *d 4.49,1.594 4.854,1.875 0.365,0.281 10 false *e 4.49,3.063 4.854,3.344 0.365,0.281 10 false *f

Text in Illustration
*a Panoramic view and wide front view screen *b Panoramic view and rear view screen
*c Two side view screen (Outer rear view mirror assembly is extracted) *d Side view and wide front view screen
*e Side view and rear view screen *f Two side view screen (Outer rear view mirror assembly is retracted)

Screen Transition Conditions
No. Screen Transition Conditions
(1) When outer rear view mirror assembly is retracted




Multi-terrain Monitor Screen Description (OFF LOAD)


a.

Manual display mode

i.

When the shift lever is moved to R, the screen switches depending on the previously displayed screen.

E339555E03
4.448,3.594 4.104,4.156 4.104,4.156 4.031,4.156 true 0.104,0.083 0.333,0.313 0.229,0.229 10 false *a 1.521,1.823 1.75,2.052 0.229,0.229 10 false *e 3.729,1.781 3.958,2.01 0.229,0.229 10 false *b 2.927,0.615 3.063,0.781 0.135,0.167 10 false 1 4.865,1.885 5.115,2.073 0.25,0.188 10 false 7 2.5,3.354 2.635,3.521 0.135,0.167 10 false 2 1.865,5.615 2,5.781 0.135,0.167 10 false 3 6.042,0.948 6.563,1.115 0.521,0.167 10 false 7 and 9 5.354,4.292 5.917,4.521 0.563,0.229 10 false 7 or 8 6.25,5.615 6.792,5.927 0.542,0.313 10 false 7 and 9 3.833,4.313 4.354,4.479 0.521,0.167 10 false 7 or 8 2.75,1.396 3.208,1.792 0.458,0.396 10 false 4, 5 or 6 4.677,3.99 4.906,4.219 0.229,0.229 10 false *c 3.865,4.073 4.094,4.302 0.229,0.229 10 false *f 4.698,6.208 4.927,6.438 0.229,0.229 10 false *d

Text in Illustration
*a Shift lever in R *b Front view and two-side view screen
*c Rear view and two-side view screen *d Wide rear view screen
*e Navigation screen, etc. *f Display mode switching button

Screen Transition Conditions
No. Screen Transition Conditions
(1) Shift lever is moved to R and main switch assembly (multi-terrain monitor main switch) is pressed
(2) Shift lever is moved to R (ended with display of screen other than wide rear view screen previously)
(3) Shift lever is moved to R (ended with display of wide rear view screen previously)
(4) Shift lever is moved to P
(5) Physical switches of multi-display are operated
(6) Shift lever is moved to other than P or R
(7) Main switch assembly (multi-terrain monitor main switch) is pressed
(8) Display mode switching button is pressed
(9) Vehicle speed changes to approximately 12 km/h or more



b.

Auto display mode

i.

The automatic display mode automatically switches the display according to the vehicle status.

E339556E03
1.031,1.854 1.313,2.083 0.281,0.229 10 false *a 2.385,1.948 2.667,2.177 0.281,0.229 10 false 1 0.479,3.042 0.76,3.271 0.281,0.229 10 false 2 3.802,2.875 4.083,3.104 0.281,0.229 10 false 6 3.823,3.573 4.104,3.802 0.281,0.229 10 false 7 3.823,5.083 4.104,5.313 0.281,0.229 10 false 6 1.938,4.365 2.625,4.594 0.688,0.229 10 false 3, 4 or 5 5.198,4.427 5.885,4.656 0.688,0.229 10 false 3, 4 or 5 3.823,5.792 4.104,6.021 0.281,0.229 10 false 7 2.135,4.042 2.417,4.271 0.281,0.229 10 false *b 5.427,4.042 5.708,4.271 0.281,0.229 10 false *d 2.135,6.271 2.417,6.5 0.281,0.229 10 false *c 5.427,6.26 5.708,6.49 0.281,0.229 10 false *e

Text in Illustration
*a Navigation screen, etc. *b Front view and two-side view screen
*c Front view and side view front tires screen *d Under floor view and side view screen
*e Under floor view and side view front tires screen *f Under floor view switching button

Screen Transition Conditions
No. Screen Transition Conditions
(1) Shift lever is moved to position other than R and main switch assembly (multi-terrain monitor main switch) is pressed (did not end with display of front view and side view front tires screen previously)
(2) Shift lever is moved to position other than R and main switch assembly (multi-terrain monitor main switch) is pressed (ended with display of front view and side view front tires screen previously)
(3) Front view screen is touched
(4) Side view screen is touched
(5) Main switch assembly (multi-terrain monitor main switch) is pressed
(6) Under floor view switching button is pressed when vehicle is parked and vehicle position can be estimated
(7) Vehicle speed is approximately 5 km/h (3 mph) or less and vehicle position cannot be estimated or under floor view switching button is pressed




OPERATION EXPLANATION


a.

The reverse position signal is sent from the shift lever position switch to the parking assist ECU when the shift lever is moved to R.


b.

An appropriate steering angle and timing information can be provided for the driver. This is based on the information from the steering angle sensor signal and the vehicle angle data signal that are sent to the parking assist ECU.

HINT:

The steering angle sensor signal is used to control parking assist only for estimated guide line mode.




COMMUNICATION SYSTEM OUTLINE


a.

CAN communication system

i.

The multi-terrain monitor system uses CAN communication for data communication between the parking assist ECU and other ECUs and between the parking assist ECU and each camera.


ii.

If a problem occurs in the CAN communication line, the parking assist ECU outputs a CAN communication malfunction DTC. (To check, use the GTS.) (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>MULTI-TERRAIN MONITOR SYSTEM>DTC CHECK / CLEAR)


iii.

If a problem occurs in the CAN communication line, the parking assist ECU outputs a CAN communication malfunction DTC. (To check, use the multi-display diagnosis screen.)



iv.

If a CAN communication line malfunction DTC is output, repair the malfunction in the communication line and troubleshoot the multi-terrain monitor system when data communication is normal.


v.

Since the CAN communication line has its own length and route, it cannot be repaired temporarily with a bypass wire, etc.



b.

AVC-LAN communication system

E301624E07
4.438,1.688 5.865,1.885 1.427,0.198 10 false Parking Assist ECU 1.458,1.615 3.24,2.052 1.781,0.438 10 false Multi-media Module Receiver Assembly 0.677,2.479 2.771,2.698 2.094,0.219 10 false : AVC-LAN Communication Line 3.365,2.479 4.406,2.667 1.042,0.188 10 false : Master Device 5.292,2.469 6.281,2.688 0.99,0.219 10 false : Slave Device 0.083,0.063 3.021,0.365 2.938,0.302 12 false for Multi-media Module Receiver Type:

E301624E08
4.469,1.625 5.896,1.823 1.427,0.198 10 false Parking Assist ECU 1.563,1.646 3.302,2.042 1.74,0.396 10 false Radio and Display Receiver Assembly 0.677,2.479 2.771,2.698 2.094,0.219 10 false : AVC-LAN Communication Line 3.365,2.479 4.406,2.667 1.042,0.188 10 false : Master Device 5.292,2.469 6.281,2.688 0.99,0.219 10 false : Slave Device 0.104,0.063 2.313,0.281 2.208,0.219 12 false for Radio and Display Type:

i.

The multi-terrain monitor system uses the AVC-LAN to communicate with other equipment.


ii.

The master device for the AVC-LAN is the multi-media module receiver assembly.


iii.

Resistance necessary for communication transfer (60 to 80 Ω between the TX+ - TX- terminals) is inside the multi-media module receiver assembly.


iv.

If a malfunction such as a communication line short, +B short, or GND short occurs in the AVC-LAN circuit, communication is interrupted and the multi-terrain monitor system and navigation system do not operate normally.




VIDEO SIGNALS


*1: for Multi-media Module Receiver Type

*2: for Radio and Display Type


a.

Video signal circuit

E340078E01
0.133,1.5 2.317,1.665 2.184,0.165 10 Front Television Camera Assembly 0.133,3.322 2.520,3.487 2.387,0.165 10 Side Television Camera Assembly LH 0.133,5.246 2.520,5.411 2.387,0.165 10 Side Television Camera Assembly RH 0.133,7.039 2.520,7.204 2.387,0.165 10 Rear Television Camera Assembly 0.91,7.774 2.408,7.939 1.498,0.165 10 : Analog Display Signal 0.925,7.409 2.504,7.575 1.579,0.165 10 : Display Signal Direction 0.925,8.538 4.430,8.703 3.505,0.165 10 : AVC-LAN Communication Line 2.877,7.847 6.382,8.012 3.505,0.165 10 *1: for Multi-media Module Receiver Type 2.877,8.193 6.382,8.358 3.505,0.165 10 *2: for Radio and Display Type 0.91,8.172 2.408,8.337 1.498,0.165 10 : GVIF Cable 5.242,3.074 6.852,3.239 1.610,0.165 10 Multi-display Assembly*1 5.144,6.946 6.946,7.372 1.802,0.427 10 Radio and Display Receiver Assembly*2 2.982,6.983 4.249,7.148 1.267,0.165 10 Parking Assist ECU

i.

Video signals from the front television camera assembly are input into the parking assist ECU via analog communication lines (vehicle wire harness).


ii.

Video signals from the side television camera assembly LH are input into the parking assist ECU via analog communication lines (vehicle wire harness).


iii.

Video signals from the side television camera assembly RH are input into the parking assist ECU via analog communication lines (vehicle wire harness).


iv.

Video signals from the rear television camera assembly are input into the parking assist ECU via analog communication lines (vehicle wire harness).


v.

Video signals from the parking assist ECU are input into the multi-display assembly via GVIF cable.*1


vi.

Video signals from the parking assist ECU are input into the radio and display receiver assembly via AVC-LAN.*2



b.

Screen display

i.

Video signals input from each camera are processed in the parking assist ECU and displayed on the multi-display assembly*1 or radio and display receiver assembly*2 as the multi-terrain monitor system screen.




DIAGNOSTIC FUNCTION OUTLINE


a.

This multi-terrain monitor system has a diagnostic function displayed in the multi-media module receiver assembly*1 or radio and display receiver assembly*2. This function enables the calibration (adjustment and verification) of the multi-terrain monitor system.

*1: for Multi-media Module Receiver Type

*2: for Radio and Display Type



b.

The multi-terrain monitor system can check the following items by using the GTS.

Item Proceed to
DTC (Click here)
Data List / Active Test (Click here)



CALIBRATION


a.

Use the multi-terrain monitor system diagnosis screen for calibration and checking of the multi-terrain monitor system (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>MULTI-TERRAIN MONITOR SYSTEM>DIAGNOSIS SYSTEM).

NOTICE:

Part replacement and work performed during servicing may require calibration of the multi-terrain monitor system and other systems (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).