Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › MULTI-TERRAIN MONITOR SYSTEM › 2015.08–2017.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255515 MULTI-TERRAIN MONITOR SYSTEM D

PARK ASSIST / MONITORING  MULTI-TERRAIN MONITOR SYSTEM  CALIBRATION  


ADJUST MULTI-TERRAIN MONITOR SYSTEM


a.

This multi-terrain monitor system can be set from the diagnostic screen of the multi-display assembly.


b.

If the following operations are performed, it is necessary to perform adjustments and checks on the diagnostic screen.

Part Name Operation Adjustment Item Proceed to
Steering sensor
·

Removal and installation of the steering sensor

·

Removal and installation of the connector of the steering sensor

·

Replacement


Steering angle neutral point (Click here)
Adjust steering angle Procedure 9
Parking assist ECU Replacement Parking assist ECU initialization Procedure 2
Procedure 7
Procedure 8
Adjust steering angle Procedure 9
Suspension, tires, etc. The vehicle height changes because of suspension or tire replacement Adjust steering angle Procedure 9
Rear television camera assembly
·

Replacement

·

Installation angle of the rear television camera changes because of the removal and installation of the rear television camera, etc.


Rear television camera view adjustment Procedure 2
Procedure 4
Procedure 8
Front television camera assembly
·

Replacement

·

Installation angle of the front television camera changes because of the removal and installation of the front television camera, etc.


Front television camera view adjustment Procedure 2
Procedure 3
Procedure 8
·

Side television camera assembly LH

·

Outer rear view mirror assembly LH


·

Replacement

·

Installation angle of the side television camera changes because of the removal and installation of the side television camera, etc.


Side television camera view adjustment Procedure 2
Procedure 5
Procedure 8
·

Side television camera assembly RH

·

Outer rear view mirror assembly RH


·

Replacement

·

Installation angle of the side television camera changes because of the removal and installation of the side television camera, etc.


Side television camera view adjustment Procedure 2
Procedure 6
Procedure 8
·

Front television camera assembly or radiator grille assembly

·

Rear television camera assembly

·

Side television camera assembly LH or outer rear view mirror assembly LH

·

Side television camera assembly RH or outer rear view mirror assembly RH


Replacement or removal and installation of 2 or more parts Television camera view adjustment Procedure 2
Procedure 7
Procedure 8



Procedure 1: PRE-WORK CHECKS


a.

Preliminary checks

NOTICE:
·

Provide shadow to prevent backlight from hitting the camera.

·

Use string that does not stretch.

·

Apply pieces of adhesive tape to serve as check markers. When placing the markers, make them 100 mm (3.94 in.) wide.



i.

Perform the work at a wide, level location (3800 to 7200 mm [12.46 to 23.62 ft.]).


ii.

Park the vehicle on a flat surface with the steering wheel centered.

NOTICE:

Before stopping the vehicle, move the vehicle backward and forward to ensure that both the steering wheel and the tires point straight ahead.



iii.

Adjust the tire pressure to the specified value(s).


iv.

Remove all luggage from the vehicle before starting work.



b.

Marker locations

i.

Secure the string to the locations required to make the checks and set markers as shown in the illustration.

·
E287135E04
0.458,0.875 0.615,0.875 0.615,0.875 0.729,1.135 false 2.021,0.771 1.844,1.115 false 2.313,1.333 2.406,1.667 2.406,1.667 2.563,1.667 false 1.094,1.333 1.031,1.604 1.031,1.604 0.917,1.604 false 2.063,3.896 1.896,3.896 1.896,3.896 1.708,3.688 false 2.49,3.344 2.333,3.344 2.333,3.344 2.271,3.083 false 0.219,0.792 0.49,1.01 0.271,0.219 10 false *e 2.073,0.583 2.313,0.771 0.24,0.188 10 false *b 2.615,1.563 2.927,1.781 0.313,0.219 10 false *a 0.677,1.5 0.885,1.719 0.208,0.219 10 false *a 2.146,3.813 2.469,4.031 0.323,0.219 10 false *d 2.552,3.25 2.792,3.469 0.24,0.219 10 false *c

Front camera adjustment only

Text in Illustration
*a Cross Check Marker
*b Check Marker
*c String 1
*d String 2
*e String 3

·
E287136E04
1.719,1.083 1.917,0.938 false 2.552,3.135 2.604,2.854 2.604,2.854 2.781,2.854 false 2.323,3.979 2.385,4.25 2.385,4.25 2.552,4.25 false 1.094,3.979 1.042,4.229 1.042,4.229 0.896,4.229 false 1.844,3.802 1.979,4.104 false 0.625,3.521 0.74,3.781 false 1.979,0.823 2.438,1.021 0.458,0.198 10 false *d 0.51,3.333 0.813,3.552 0.302,0.219 10 false *e 0.667,4.135 0.917,4.396 0.25,0.26 10 false *a 2.635,4.167 2.865,4.396 0.229,0.229 10 false *a 1.938,4.167 2.208,4.375 0.271,0.208 10 false *b 2.865,2.75 3.146,2.948 0.281,0.198 10 false *c

Rear camera adjustment only

Text in Illustration
*a Cross Check Marker
*b Check Marker
*c String 1
*d String 2
*e String 3

·
E287137E04
1.063,0.917 0.906,0.74 false 2.281,0.958 2.365,0.698 2.365,0.698 2.51,0.698 false 2.49,2.906 2.531,2.615 2.531,2.615 2.708,2.615 false 1.719,3.75 1.938,3.917 false 1.125,3.635 1.313,3.771 false 1.104,3.885 0.906,4.01 false 0.917,1.625 1.073,1.531 false 0.906,2.323 1.063,2.229 false 2.5,3.521 2.542,3.229 2.542,3.229 2.719,3.229 false 0.719,0.573 1,0.823 0.281,0.25 10 false *a 1.365,3.74 1.635,3.938 0.271,0.198 10 false *a 0.698,1.573 0.927,1.74 0.229,0.167 10 false *b 0.729,3.927 0.938,4.156 0.208,0.229 10 false *g 2.01,3.875 2.313,4.083 0.302,0.208 10 false *d 2.802,2.51 3.052,2.708 0.25,0.198 10 false *c 2.802,3.146 3.125,3.365 0.323,0.219 10 false *f 2.563,0.604 3.01,0.854 0.448,0.25 10 false *e 0.708,2.292 0.938,2.458 0.229,0.167 10 false *b

Left camera adjustment only

Text in Illustration
*a Cross Check Marker
*b Check Marker
*c String 1
*d String 2
*e String 3
*f String 4
*g String 5

·
E287138E04
0.938,0.604 1.135,0.604 1.135,0.604 1.219,0.906 false 2.49,0.698 2.344,0.865 false 2.531,3.917 2.313,3.802 false 2.281,3.573 2.135,3.74 false 1.719,3.729 1.552,3.875 false 0.969,2.854 0.917,2.563 0.917,2.563 0.75,2.563 false 2.531,2.25 2.333,2.156 false 2.542,1.573 2.344,1.479 false 1.031,3.469 0.979,3.177 0.979,3.177 0.813,3.177 false 2.542,0.552 2.781,0.792 0.24,0.24 10 false *a 1.958,3.677 2.156,3.885 0.198,0.208 10 false *a 2.615,1.521 2.844,1.719 0.229,0.198 10 false *b 0.688,0.51 0.927,0.708 0.24,0.198 10 false *e 0.542,2.479 0.792,2.688 0.25,0.208 10 false *c 0.615,3.073 0.802,3.271 0.188,0.198 10 false *f 1.365,3.823 1.615,4.021 0.25,0.198 10 false *d 2.604,3.865 2.906,4.104 0.302,0.24 10 false *g 2.604,2.198 2.833,2.396 0.229,0.198 10 false *b

Right camera adjustment only

Text in Illustration
*a Cross Check Marker
*b Check Marker
*c String 1
*d String 2
*e String 3
*f String 4
*g String 6

·

Adjustment of 4 cameras

E287104E04
4.26,1.563 4.542,1.448 false 2.656,4.208 2.833,4.073 false 2.531,1.427 2.875,1.5 false 4.292,1.771 4.458,1.854 false 3.417,4.354 3.573,4.24 false 4.458,4.219 4.292,4.083 false 4.833,1.125 4.885,0.813 4.885,0.813 5.031,0.813 false 4.281,1.094 4.438,0.917 false 2.833,1.083 2.688,0.917 false 3.74,1.094 3.802,0.844 false 2.698,1.865 2.844,1.781 false 2.698,2.635 2.844,2.552 false 4.281,2.552 4.448,2.635 false 4.781,4.031 4.854,3.74 4.854,3.74 5.01,3.74 false 4.76,3.344 4.833,3.052 4.833,3.052 4.99,3.052 false 3.854,4.333 3.75,4.073 false 4.49,4.219 4.781,4.417 0.292,0.198 10 false *a 4.49,0.771 4.719,0.948 0.229,0.177 10 false *a 2.51,2.594 2.771,2.771 0.26,0.177 10 false *b 3.75,0.635 4,0.813 0.25,0.177 10 false *b 2.302,1.281 2.51,1.49 0.208,0.208 10 false *g 4.573,1.333 4.865,1.542 0.292,0.208 10 false *h 5.083,2.969 5.365,3.208 0.281,0.24 10 false *c 5.094,0.719 5.365,0.885 0.271,0.167 10 false *e 5.094,3.667 5.333,3.854 0.24,0.188 10 false *f 3.198,4.302 3.438,4.5 0.24,0.198 10 false *d 2.521,1.792 2.781,1.969 0.26,0.177 10 false *b 4.5,1.802 4.76,1.979 0.26,0.177 10 false *b 4.49,2.583 4.75,2.76 0.26,0.177 10 false *b 2.521,0.771 2.813,0.969 0.292,0.198 10 false *a 3.823,4.375 4.083,4.552 0.26,0.177 10 false *b 2.479,4.156 2.771,4.354 0.292,0.198 10 false *a

Text in Illustration
*a Cross Check Marker *b Check Marker
*c String 1 *d String 2
*e String 3 *f String 4
*g String 5 *h String 6




c.

Marker positions

E287105E04
3.365,4.99 3.271,5.146 false 3.75,4.99 3.854,5.146 false 3.385,0.5 3.292,0.302 false 3.75,0.49 3.854,0.281 false 3.208,5.333 3.115,5.49 false 3.906,5.333 4.01,5.49 false 1.698,2.438 1.938,2.583 false 1.688,3.969 1.927,4.115 false 4.646,3.323 4.844,3.25 false 5.219,3.135 5.417,3.063 false 5.792,2.75 5.99,2.677 false 6.375,2.479 6.573,2.406 false 3.094,0.177 3.292,0.375 0.198,0.198 10 false *d 3.01,5.521 3.24,5.688 0.229,0.167 10 false *c 1.448,3.854 1.667,4.063 0.219,0.208 10 false *b 1.469,2.333 1.76,2.552 0.292,0.219 10 false *a 3.875,0.156 4.073,0.354 0.198,0.198 10 false *d 3.99,5.521 4.219,5.688 0.229,0.167 10 false *c 3.198,5.156 3.396,5.354 0.198,0.198 10 false *d 3.823,5.156 4.021,5.354 0.198,0.198 10 false *d 4.875,3.156 5.115,3.313 0.24,0.156 10 false *e 5.448,2.958 5.688,3.115 0.24,0.156 10 false *f 6,2.563 6.25,2.833 0.25,0.271 10 false *g 6.583,2.292 6.833,2.563 0.25,0.271 10 false *h

Text in Illustration
*a 5400 mm (17.7 ft.) *b 1000 mm (3.28 ft.)
*c 1500 mm (4.92 ft.) *d 693 mm (2.27 ft.)
*e 2200 mm (7.21 ft.) *f 2400 mm (7.87 ft.)
*g 3400 mm (11.2 ft.) *h 3600 mm (11.8 ft.)



PROCEDURE 2: SET DATUM POINTS


a.

Extend the datum line (string 1).

i.
E308604E03
2.563,3 2.625,2.719 2.625,2.719 2.792,2.719 false 2.25,3.146 2.521,3.146 false 2.052,3.021 2.229,3.188 0.177,0.167 10 false *a 2.833,2.583 3.01,2.75 0.177,0.167 10 false *b

Hang a weight with a pointed tip and accurately mark the center position on the road surface. (Mark A)

NOTICE:

Make sure that the weight hangs straight down from the string.


Text in Illustration
*a Mark A
*b Weight


ii.
E287139E04
1.01,2.771 1.292,2.458 false 2.417,2.74 2.125,2.458 false 2.385,2.458 2.521,2.188 false 2.479,1.969 2.688,2.167 0.208,0.198 10 false *a 0.917,2.802 1.125,3.01 0.208,0.208 10 false *b 2.417,2.771 2.708,3 0.292,0.229 10 false *c

Secure string 1 so that it passes through marks A and B on the left and right sides.

NOTICE:

When securing the string, check that there is no slack and the string is not twisted.


Text in Illustration
*a String 1
*b Mark A
*c Mark B



b.

Extend the vehicle center line (string 2).

i.

Hang a weight with a pointed tip such that is passes through the center of the front television camera assembly and accurately mark the center position on the road surface. (Mark C)

E308605E02
3.885,2.271 3.833,2.052 3.833,2.052 3.698,2.052 false 3.927,2.354 4.104,2.354 false 1.625,1.25 1.813,1.229 false 1.563,2.052 1.74,2.031 false 1.385,1.552 1.563,1.573 false 1.208,1.458 1.385,1.625 0.177,0.167 10 false *a 1.833,1.146 2.01,1.313 0.177,0.167 10 false *1 3.531,1.969 3.708,2.135 0.177,0.167 10 false *b 1.76,1.948 1.938,2.115 0.177,0.167 10 false *c 4.135,2.271 4.313,2.438 0.177,0.167 10 false *d

Text in Illustration
*1 Front Television Camera Assembly - -
*a Center Point *b Weight
*c String *d Mark C


ii.

Hang a weight with a pointed tip from the center of the rear emblem and accurately mark the center position on the road surface. (Mark D)

E321116E02
2.771,2.615 2.823,2.396 2.823,2.396 2.958,2.396 false 2.771,2.688 2.938,2.688 false 5.156,0.635 5.323,0.635 false 4.99,1.625 5.156,1.625 false 3.01,2.313 3.188,2.479 0.177,0.167 10 false *b 3.01,2.594 3.188,2.76 0.177,0.167 10 false *d 5.365,0.563 5.542,0.729 0.177,0.167 10 false *a 4.823,1.542 5,1.708 0.177,0.167 10 false *c

Text in Illustration
*a Center *b Weight
*c String *d Mark D


iii.
E287140E04
1.719,1.333 1.938,1.125 false 2.417,2.927 2.563,2.729 false 1.281,2.458 1.708,2.917 false 1.719,3.208 1.917,3.427 false 1.542,3.76 1.719,3.604 false 1.083,2.333 1.344,2.531 0.26,0.198 10 false *a 1.948,0.99 2.177,1.219 0.229,0.229 10 false *d 1.979,3.375 2.208,3.573 0.229,0.198 10 false *e 2.635,2.573 3.021,2.781 0.385,0.208 10 false *b 1.333,3.708 1.563,3.896 0.229,0.188 10 false *c

Secure string 2 so that it passes through marks C and D at the front and rear of the vehicle.

NOTICE:

When securing string 2, check that there is no slack and the string is not twisted.


HINT:

Set the point where strings 1 and 2 intersect as the datum point.


Text in Illustration
*a Datum Point
*b String 1
*c String 2
*d Mark C
*e Mark D




PROCEDURE 3: SET MARKERS (when checking front)


a.

In front of the vehicle, extend string 3 perpendicular to the vehicle center line (string 2), and place a marker.

i.
E287141E04
1.719,1.208 1.927,1.073 false 2.49,3.333 2.333,3.156 false 1.906,3.854 1.708,3.729 false 1.26,3.667 1.438,3.667 1.438,3.667 1.719,3.156 false 0.583,2.271 0.792,2.135 false 0.823,2 1.094,2.198 0.271,0.198 10 false *a 1.99,0.958 2.271,1.156 0.281,0.198 10 false *e 2.563,3.323 3.104,3.615 0.542,0.292 10 false *c 1.979,3.823 2.344,4.031 0.365,0.208 10 false *d 1.063,3.573 1.365,3.781 0.302,0.208 10 false *b

Mark the position on string 2 in front of the vehicle, 5400 mm (17.7 ft.) from the datum point. (Mark E)

Text in Illustration
*a 5400 mm (17.7 ft.)
*b Datum Point
*c String 1
*d String 2
*e Mark E


ii.
E275619E08
1.479,1.104 1.698,1.021 false 1.719,3.031 2.365,3.146 false 2.146,0.802 2.365,0.719 false 2.146,1.281 2.365,1.198 false 2.396,0.635 2.677,0.854 0.281,0.219 10 false *a 2.448,3.104 2.688,3.313 0.24,0.208 10 false *b 1.302,1.031 1.625,1.198 0.323,0.167 10 false *c 2.417,1.083 2.698,1.302 0.281,0.219 10 false *a

Fix the ends of 2 strings (800 mm [2.62 ft.] long) at 2 positions 400 mm (1.31 ft.) from mark E as shown in the illustration.

Text in Illustration
*a 400 mm (1.31 ft.)
*b String 2
*c Mark E


iii.

Move the free ends of the 2 strings and mark the point where the ends meet. (Marks F and G)

E271119E08
1.667,0.542 1.792,0.708 false 1.625,1.24 1.781,1.063 false 1.313,1.021 1.469,0.885 false 2.146,0.885 2.323,0.75 false 4.938,2.583 5.583,2.583 false 2.135,2.573 2.781,2.573 false 4.104,1.021 4.271,0.896 false 4.75,0.781 4.938,0.885 false 5.615,0.885 5.76,0.729 false 5.26,0.688 5.406,0.531 false 5.271,1.083 5.385,1.26 false 1.51,0.354 1.781,0.552 0.271,0.198 10 false *a 1.125,0.99 1.396,1.188 0.271,0.198 10 false *d 1.469,1.25 1.74,1.448 0.271,0.198 10 false *a 4.573,0.677 4.844,0.875 0.271,0.198 10 false *c 3.927,0.969 4.198,1.167 0.271,0.198 10 false *d 2.354,0.615 2.625,0.813 0.271,0.198 10 false *c 5.417,0.406 5.688,0.604 0.271,0.198 10 false *a 5.438,1.219 5.708,1.417 0.271,0.198 10 false *a 5.813,0.615 6.083,0.813 0.271,0.198 10 false *e 5.646,2.5 5.917,2.698 0.271,0.198 10 false *b 2.854,2.479 3.125,2.677 0.271,0.198 10 false *b

Text in Illustration
*a 800 mm (2.62 ft.) String *b String 2
*c Mark E *d Mark F
*e Mark G - -


iv.
E287142E04
0.927,0.958 1.094,1.25 false 1.24,1.563 1.396,1.25 false 2.302,1.583 2.031,1.25 false 2.573,1.563 2.313,1.25 false 2.792,0.99 2.667,0.99 2.667,0.99 2.604,1.25 false 1.885,4.052 1.719,3.927 false 2.583,3.375 2.448,3.198 false 2.229,0.615 2.083,0.615 2.083,0.615 2,0.948 false 1.198,0.604 1.365,0.604 1.365,0.604 1.406,0.938 false 1,0.51 1.177,0.698 0.177,0.188 10 false *a 0.781,0.781 1.094,0.979 0.313,0.198 10 false *g 1.094,1.563 1.406,1.76 0.313,0.198 10 false *e 2.313,1.625 2.625,1.823 0.313,0.198 10 false *f 2.604,1.615 2.917,1.813 0.313,0.198 10 false *h 2.854,0.906 3.24,1.104 0.385,0.198 10 false *d 2.656,3.354 3.042,3.552 0.385,0.198 10 false *b 1.948,3.99 2.333,4.188 0.385,0.198 10 false *c 2.281,0.51 2.635,0.719 0.354,0.208 10 false *a

Secure string 3 so that it passes through marks F and G as shown in the illustration.

NOTICE:

When securing the string, check that there is no slack and the string is not twisted.


Text in Illustration
*a 1500 mm (4.92 ft.)
*b String 1
*c String 2
*d String 3
*e Mark F
*f Mark G
*g Mark H
*h Mark I


v.

Mark positions on string 3, 1500 mm (4.92 ft.) to the left and right of the vehicle center line (string 2). (Marks H and I).


vi.
E287109E04
0.938,1.49 1.094,1.302 false 2.177,1.594 1.875,1.125 false 1.083,1.083 0.896,0.875 false 2.052,1.083 1.865,0.5 false 1.385,1.083 1.219,0.594 false 2.323,0.635 2.323,0.333 2.323,0.333 2.583,0.333 false 2.333,1.083 2.604,0.792 2.604,0.792 2.76,0.792 false 3.25,1.333 3.25,1.104 3.25,1.104 3.052,1.104 false 2.438,1.5 2.323,1.313 false 2.208,1.625 2.458,1.833 0.25,0.208 10 false *d 2.49,1.51 2.865,1.719 0.375,0.208 10 false *c 0.719,0.698 1.031,0.948 0.313,0.25 10 false *g 1.104,0.417 1.365,0.583 0.26,0.167 10 false *e 1.771,0.313 2.021,0.563 0.25,0.25 10 false *f 2.781,0.698 3.115,0.865 0.333,0.167 10 false *h 2.635,0.25 3.219,0.417 0.583,0.167 10 false *a 3.167,1.385 3.375,1.615 0.208,0.229 10 false *b 0.792,1.51 1.052,1.688 0.26,0.177 10 false *c

Place and secure the cross check markers, centered on marks H and I.

NOTICE:
·

Align the cross check markers perpendicular to the string.

·

Make each arm of the cross check markers 800 mm (2.62 ft.) long and 100 mm (0.33 ft.) wide.



Text in Illustration
*a 800 mm (2.62 ft.)
*b 100 mm (0.33 ft.)
*c Cross Check Marker
*d Check Marker
*e Mark F
*f Mark G
*g Mark H
*h Mark I




PROCEDURE 4: SET MARKERS (When checking rear)


a.

To the rear of the vehicle, extend string 4 perpendicular to the vehicle center line (string 2), and place a check marker.

i.
E287143E04
1.719,0.927 1.896,0.854 false 1.104,2.344 1.26,2.344 1.26,2.344 1.708,2.833 false 0.917,3.271 1.104,3.167 false 1.719,3.573 1.885,3.74 false 2.417,3.021 2.271,2.844 false 0.698,3.208 0.927,3.406 0.229,0.198 10 false *a 1.969,3.719 2.229,3.917 0.26,0.198 10 false *e 0.896,2.25 1.25,2.479 0.354,0.229 10 false *b 1.917,0.74 2.26,0.969 0.344,0.229 10 false *d 2.396,3.052 2.677,3.271 0.281,0.219 10 false *c

Mark a position on string 2 to the rear of the vehicle, 1000 mm (3.28 ft.) from the datum point. (Mark J)

Text in Illustration
*a 1000 mm (3.28 ft.)
*b Datum Point
*c String 1
*d String 2
*e Mark J


ii.
E287110E05
1.708,0.792 2.417,0.542 false 2.417,1.344 2.583,1.542 false 1.729,2.427 1.979,2.563 false 1.063,2.167 1.281,2.167 false 1.063,2.656 1.281,2.656 false 2.49,0.458 2.823,0.656 0.333,0.198 10 false *c 2.573,1.563 2.927,1.75 0.354,0.188 10 false *b 2.031,2.469 2.365,2.635 0.333,0.167 10 false *d 0.844,2.063 1.073,2.25 0.229,0.188 10 false *a 0.865,2.552 1.094,2.74 0.229,0.188 10 false *a

Fix the ends of 2 strings (800 mm [2.62 ft.]) at 2 positions 400 mm (1.31 ft.) from mark H as shown in the illustration.

Text in Illustration
*a 400 mm (1.31 ft.)
*b String 1
*c String 2
*d Mark J


iii.

Move the free ends of the 2 strings and mark the point where the ends meet. (Marks K and L)

E287111E04
6.135,1.031 6.313,0.885 false 5.542,1.906 5.708,1.781 false 6.406,1.76 6.208,1.896 false 5.167,2.083 5,2.25 false 4.854,1.906 4.604,2.073 false 2.063,1.615 1.885,1.708 false 5.198,1.719 5.031,1.542 false 1.552,1.896 1.396,1.792 false 1.906,2.083 2.115,2.24 false 5.521,0.604 4.896,0.479 false 0.99,1.031 0.781,0.865 false 1.552,0.656 2.115,0.469 false 2.406,1.802 2.229,1.896 false 0.583,0.76 0.844,0.948 0.26,0.188 10 false *b 2.156,0.344 2.469,0.542 0.313,0.198 10 false *c 4.74,0.385 5,0.563 0.26,0.177 10 false *c 6.365,0.75 6.646,0.938 0.281,0.188 10 false *b 1.208,1.677 1.542,1.844 0.333,0.167 10 false *d 4.458,2.052 4.698,2.229 0.24,0.177 10 false *f 2.458,1.708 2.646,1.875 0.188,0.167 10 false *e 6.448,1.646 6.74,1.854 0.292,0.208 10 false *e 5.75,1.677 6.083,1.844 0.333,0.167 10 false *d 4.875,1.375 5.125,1.563 0.25,0.188 10 false *a 2.104,1.5 2.385,1.667 0.281,0.167 10 false *a 2.156,2.177 2.427,2.375 0.271,0.198 10 false *a 4.833,2.208 5.115,2.417 0.281,0.208 10 false *a

Text in Illustration
*a 800 mm (2.62 ft.) String *b String 1
*c String 2 *d Mark J
*e Mark K *f Mark L


iv.
E287144E04
1.708,0.896 1.906,0.802 false 0.698,2.479 0.875,2.688 false 1.208,3.219 1.396,3.354 false 0.844,3.667 1.094,3.354 false 2.198,3.177 2.052,3.344 false 2.875,3.542 2.677,3.344 false 2.51,3.688 2.313,3.344 false 1.438,3.948 1.438,3.667 false 2.021,3.948 2.021,3.667 false 1.927,0.677 2.24,0.927 0.313,0.25 10 false *c 0.563,2.292 1.021,2.49 0.458,0.198 10 false *b 1.073,3.063 1.271,3.229 0.198,0.167 10 false *f 2.198,3.042 2.51,3.24 0.313,0.198 10 false *e 2.906,3.583 3.146,3.823 0.24,0.24 10 false *d 2.49,3.719 2.729,3.938 0.24,0.219 10 false *h 1.365,3.958 1.708,4.188 0.344,0.229 10 false *a 0.729,3.688 1,3.906 0.271,0.219 10 false *g 1.958,3.958 2.302,4.188 0.344,0.229 10 false *a

Secure string 4 so that it passes through marks K and L as shown in the illustration.

NOTICE:

When securing the string, check that there is no slack and the string is not twisted.


Text in Illustration
*a 1500 mm (4.92 ft.)
*b String 1
*c String 2
*d String 4
*e Mark K
*f Mark L
*g Mark M
*h Mark N


v.

Mark positions on string 4, 1500 mm (4.92 ft.) to the left and right of the vehicle center line (string 2). (Marks M and N)


vi.
E287106E04
2.552,2.948 2.729,2.74 false 1.865,3.979 1.865,3.667 false 1.385,3.615 1.073,1.833 1.073,1.833 0.927,1.833 false 2.052,3.604 2.427,1.875 2.427,1.875 2.583,1.875 false 3.167,3.885 3.167,3.635 3.167,3.635 3.052,3.635 false 1.51,4.01 1.51,3.74 1.51,3.74 1.354,3.74 false 2.333,4.125 2.333,4.031 false 2.333,3.615 2.458,3.438 false 2.708,3.896 2.323,3.771 false 1.094,3.604 0.969,3.469 false 0.865,3.917 0.99,3.656 false 2.781,2.625 3.063,2.792 0.281,0.167 10 false *f 2.5,3.302 2.708,3.542 0.208,0.24 10 false *j 1.802,4 2.01,4.198 0.208,0.198 10 false *e 1.417,4.021 1.646,4.219 0.229,0.198 10 false *c 2.26,4.125 2.458,4.313 0.198,0.188 10 false *a 3.073,3.927 3.271,4.146 0.198,0.219 10 false *b 0.729,1.75 0.99,1.917 0.26,0.167 10 false *h 2.615,1.771 2.875,2.01 0.26,0.24 10 false *g 2.75,3.844 2.958,4.073 0.208,0.229 10 false *d 0.813,3.354 1.021,3.51 0.208,0.156 10 false *i 0.76,3.927 0.99,4.125 0.229,0.198 10 false *d

Place and secure the cross check markers, centered on marks M and N.

NOTICE:
·

Align the cross check markers perpendicular to the string.

·

Make each arm of the cross check markers 800 mm (2.62 ft.) long and 100 mm (1.31 ft.) wide.

·

Extend the rear cross check markers to string 1.



Text in Illustration
*a 800 mm (2.62 ft.)
*b 100 mm (0.33 ft.)
*c 400 mm (1.31 ft.)
*d Cross Check Marker
*e Check Marker
*f String 1
*g Mark K
*h Mark L
*i Mark M
*j Mark N


vii.

Place the check marker between marks K and L.


viii.

Perform camera view adjustment (calibration) (procedure 8).




PROCEDURE 5: SET MARKERS (When checking left side)


a.

To the left side of the vehicle, extend string 5 perpendicular to the vehicle center line (string 2), and place a check marker.

i.
E287145E05
1.719,0.76 1.917,0.677 false 1.719,1.042 1.938,1.042 false 2.458,2.99 2.615,2.833 false 1.719,2.99 2.063,3.365 false 1.719,3.698 1.917,3.885 false 0.354,2.031 0.583,2.031 false 0.344,3.354 0.573,3.354 false 2.01,0.552 2.333,0.75 0.323,0.198 10 false *e 2.021,0.969 2.25,1.188 0.229,0.219 10 false *f 2.667,2.677 2.875,2.885 0.208,0.208 10 false *d 2.135,3.354 2.427,3.583 0.292,0.229 10 false *c 1.958,3.813 2.229,4.01 0.271,0.198 10 false *g 0.135,3.25 0.365,3.469 0.229,0.219 10 false *a 0.167,1.948 0.406,2.177 0.24,0.229 10 false *b

Mark the position on string 2 in front of the vehicle, 5400 mm (17.7 ft.) from the datum point. (Mark E)

Text in Illustration
*a 1000 mm (3.28 ft.)
*b 5400 mm (17.7 ft.)
*c Datum Point
*d String 1
*e String 2
*f Mark E
*g Mark J


ii.

Mark the position on string 2 to the rear of the vehicle, 1000 mm (3.28 ft.) from the datum point. (Mark J)


iii.
E275619E08
1.479,1.104 1.698,1.021 false 1.719,3.031 2.365,3.146 false 2.146,0.802 2.365,0.719 false 2.146,1.281 2.365,1.198 false 2.396,0.635 2.677,0.854 0.281,0.219 10 false *a 2.448,3.104 2.688,3.313 0.24,0.208 10 false *b 1.302,1.031 1.625,1.198 0.323,0.167 10 false *c 2.417,1.083 2.698,1.302 0.281,0.219 10 false *a

Fix the ends of 2 strings (800 mm [2.62 ft.] long) at 2 positions 400 mm (1.31 ft.) from mark E as shown in the illustration.

Text in Illustration
*a 400 mm (1.31 ft.)
*b String 2
*c Mark E


iv.

Move the free ends of the 2 strings and mark the point where the ends meet. (Marks F and G)

E271119E08
1.667,0.542 1.792,0.708 false 1.625,1.24 1.781,1.063 false 1.313,1.021 1.469,0.885 false 2.146,0.885 2.323,0.75 false 4.938,2.583 5.583,2.583 false 2.135,2.573 2.781,2.573 false 4.104,1.021 4.271,0.896 false 4.75,0.781 4.938,0.885 false 5.615,0.885 5.76,0.729 false 5.26,0.688 5.406,0.531 false 5.271,1.083 5.385,1.26 false 1.51,0.354 1.781,0.552 0.271,0.198 10 false *a 1.125,0.99 1.396,1.188 0.271,0.198 10 false *d 1.469,1.25 1.74,1.448 0.271,0.198 10 false *a 4.573,0.677 4.844,0.875 0.271,0.198 10 false *c 3.927,0.969 4.198,1.167 0.271,0.198 10 false *d 2.354,0.615 2.625,0.813 0.271,0.198 10 false *c 5.417,0.406 5.688,0.604 0.271,0.198 10 false *a 5.438,1.219 5.708,1.417 0.271,0.198 10 false *a 5.813,0.615 6.083,0.813 0.271,0.198 10 false *e 5.646,2.5 5.917,2.698 0.271,0.198 10 false *b 2.854,2.479 3.125,2.677 0.271,0.198 10 false *b

Text in Illustration
*a 800 mm (2.62 ft.) String *b String 2
*c Mark E *d Mark F
*e Mark G - -


v.
E287110E05
1.708,0.792 2.417,0.542 false 2.417,1.344 2.583,1.542 false 1.729,2.427 1.979,2.563 false 1.063,2.167 1.281,2.167 false 1.063,2.656 1.281,2.656 false 2.49,0.458 2.823,0.656 0.333,0.198 10 false *c 2.573,1.563 2.927,1.75 0.354,0.188 10 false *b 2.031,2.469 2.365,2.635 0.333,0.167 10 false *d 0.844,2.063 1.073,2.25 0.229,0.188 10 false *a 0.865,2.552 1.094,2.74 0.229,0.188 10 false *a

Fix the ends of 2 strings (800 mm [2.62 ft.]) at 2 positions 400 mm (1.31 ft.) from mark J as shown in the illustration.

Text in Illustration
*a 400 mm (1.31 ft.)
*b String 1
*c String 2
*d Mark J


vi.

Move the free ends of the 2 strings and mark the point where the ends meet. (Marks K and L)

E287111E04
6.135,1.031 6.313,0.885 false 5.542,1.906 5.708,1.781 false 6.406,1.76 6.208,1.896 false 5.167,2.083 5,2.25 false 4.854,1.906 4.604,2.073 false 2.063,1.615 1.885,1.708 false 5.198,1.719 5.031,1.542 false 1.552,1.896 1.396,1.792 false 1.906,2.083 2.115,2.24 false 5.521,0.604 4.896,0.479 false 0.99,1.031 0.781,0.865 false 1.552,0.656 2.115,0.469 false 2.406,1.802 2.229,1.896 false 0.583,0.76 0.844,0.948 0.26,0.188 10 false *b 2.156,0.344 2.469,0.542 0.313,0.198 10 false *c 4.74,0.385 5,0.563 0.26,0.177 10 false *c 6.365,0.75 6.646,0.938 0.281,0.188 10 false *b 1.208,1.677 1.542,1.844 0.333,0.167 10 false *d 4.458,2.052 4.698,2.229 0.24,0.177 10 false *f 2.458,1.708 2.646,1.875 0.188,0.167 10 false *e 6.448,1.646 6.74,1.854 0.292,0.208 10 false *e 5.75,1.677 6.083,1.844 0.333,0.167 10 false *d 4.875,1.375 5.125,1.563 0.25,0.188 10 false *a 2.104,1.5 2.385,1.667 0.281,0.167 10 false *a 2.156,2.177 2.427,2.375 0.271,0.198 10 false *a 4.833,2.208 5.115,2.417 0.281,0.208 10 false *a

Text in Illustration
*a 800 mm (2.62 ft.) String *b String 1
*c String 2 *d Mark J
*e Mark K *f Mark L


vii.
E287146E05
0.885,0.885 1.094,1.063 false 1.26,1.229 1.396,1.063 false 2.042,1.052 2.125,0.823 false 2.552,1.063 2.625,0.854 false 2.583,3.719 2.708,3.906 false 2.052,3.719 2.167,3.896 false 1.26,3.5 1.385,3.708 false 0.875,3.917 1.083,3.719 false 1.375,4.021 1.448,4.188 false 1.406,0.604 1.354,0.75 false 0.719,0.688 1.031,0.885 0.313,0.198 10 false *f 1.333,0.396 1.531,0.573 0.198,0.177 10 false *a 1.167,1.25 1.479,1.448 0.313,0.198 10 false *d 2.052,0.646 2.281,0.854 0.229,0.208 10 false *e 2.563,0.667 2.813,0.865 0.25,0.198 10 false *b 2.688,3.938 2.896,4.125 0.208,0.188 10 false *c 2.135,3.927 2.448,4.125 0.313,0.198 10 false *g 1.427,4.229 1.698,4.427 0.271,0.198 10 false *a 0.781,3.948 0.958,4.167 0.177,0.219 10 false *i 1.125,3.313 1.438,3.51 0.313,0.198 10 false *h

Secure strings 3 and 4 so that they pass through marks F and G, marks K and L as shown in the illustration.

NOTICE:

When securing the string, check that there is no slack and the string is not twisted.


Text in Illustration
*a 1500 mm (4.92 ft.)
*b String 3
*c String 4
*d Mark F
*e Mark G
*f Mark H
*g Mark K
*h Mark L
*i Mark M


viii.

Mark strings 3 and 4, 1500 mm (4.92 ft.) to the left of the vehicle center line (string 2). (Marks H and M)


ix.
E287147E04
1.198,0.885 1.385,1.021 false 1.229,0.656 1.396,0.792 false 1.406,1.531 1.229,1.365 false 1.385,1.667 1.198,1.781 false 1.385,2.208 1.229,2.104 false 1.396,2.354 1.292,2.448 false 2.594,2.979 2.719,3.104 false 1.396,3.594 1.542,3.719 false 0.25,2.177 0.146,2.177 0.146,2.177 0.146,2.313 false 0.51,2.188 0.406,2.188 0.406,2.188 0.406,2.323 false 0.802,2.583 0.698,2.583 0.698,2.583 0.698,2.719 false 1.063,2.583 0.958,2.583 0.958,2.583 0.958,2.719 false 1.073,0.531 1.313,0.719 0.24,0.188 10 false *f 1.01,0.76 1.469,0.958 0.458,0.198 10 false *g 1.073,1.24 1.292,1.417 0.219,0.177 10 false *l 1.031,1.708 1.219,1.906 0.188,0.198 10 false *k 1.104,1.958 1.26,2.177 0.156,0.219 10 false *j 1.229,2.458 1.406,2.635 0.177,0.177 10 false *i 2.677,3.115 2.906,3.302 0.229,0.188 10 false *e 1.625,3.688 1.865,3.865 0.24,0.177 10 false *h 0.896,2.729 1.125,2.917 0.229,0.188 10 false *a 0.604,2.74 0.833,2.927 0.229,0.188 10 false *b 0.344,2.344 0.573,2.531 0.229,0.188 10 false *c 0.052,2.333 0.281,2.521 0.229,0.188 10 false *d

Secure string 5 so that it passes through marks H and M as shown in the illustration.

NOTICE:

When securing the string, check that there is no slack and the string is not twisted.


Text in Illustration
*a 2200 mm (7.22 ft.)
*b 2400 mm (7.87 ft.)
*c 3400 mm (11.2 ft.)
*d 3600 mm (11.8 ft.)
*e String 1
*f String 5
*g Mark H
*h Mark M
*i Mark O
*j Mark P
*k Mark Q
*l Mark R


x.

Make marks on string 5 that are 2200 mm (7.22 ft.), 2400 mm (7.87 ft.), 3400 mm (11.2 ft.), and 3600 mm (11.8 ft.) from the datum line (string 1) as shown in the illustration. (Marks O, P, Q and R)


xi.
E287107E04
1.094,3.615 0.906,3.469 false 1.25,0.167 1.104,0.167 1.104,0.167 1.104,0.396 false 1.854,0.573 1.135,0.917 false 1.104,3.833 0.948,3.979 false 1.583,4 1.583,3.74 1.583,3.74 1.438,3.74 false 0.906,1.188 1.104,1.031 false 1.104,0.667 0.667,0.5 false 2.469,3.01 2.677,2.844 false 0.938,2.563 1.104,2.396 false 0.885,2.125 1.115,2.229 false 1.219,1.844 1.104,1.75 false 1.229,1.417 1.115,1.583 false 0.365,1.031 0.198,1.031 0.198,1.031 0.198,1.26 false 0.854,2.313 1.073,2.313 false 0.865,1.667 1.073,1.667 false 1.281,0.083 1.594,0.26 0.313,0.177 10 false *b 0.479,0.375 0.885,0.604 0.406,0.229 10 false *g 1.875,0.469 2.188,0.667 0.313,0.198 10 false *d 0.656,1.583 0.875,1.75 0.219,0.167 10 false *e 0.76,3.938 1.01,4.125 0.25,0.188 10 false *d 0.729,3.313 0.979,3.5 0.25,0.188 10 false *i 1.51,4.021 1.719,4.188 0.208,0.167 10 false *c 2.708,2.698 2.927,2.896 0.219,0.198 10 false *f 0.719,1.156 0.917,1.365 0.198,0.208 10 false *h 1.219,1.26 1.563,1.427 0.344,0.167 10 false *m 1.177,1.875 1.385,2.052 0.208,0.177 10 false *l 0.146,1.302 0.427,1.521 0.281,0.219 10 false *a 0.698,2.031 0.917,2.198 0.219,0.167 10 false *k 0.604,2.208 0.823,2.375 0.219,0.167 10 false *e 0.76,2.5 0.938,2.76 0.177,0.26 10 false *j

Place and secure the cross check markers, centered on marks H and M.

NOTICE:
·

Align the cross check markers perpendicular to the string.

·

Make each arm of the cross check markers 800 mm (2.62 ft.) long and 100 mm (1.31 ft.) wide.

·

Extend the rear cross check markers to string 1.



Text in Illustration
*a 100 mm (0.33 ft.)
*b 800 mm (2.62 ft.)
*c 400 mm (1.31 ft.)
*d Cross Check Marker
*e Check Marker
*f String 1
*g String 5
*h Mark H
*i Mark M
*j Mark O
*k Mark P
*l Mark Q
*m Mark R


xii.

Place check markers between marks O and P, and marks Q and R.


xiii.

Perform camera view adjustment (calibration) (procedure 8).




PROCEDURE 6: SET MARKERS (When checking right side)


a.

At the right side of the vehicle, extend string 6 parallel to the vehicle and place a marker.

i.
E287145E05
1.719,0.76 1.917,0.677 false 1.719,1.042 1.938,1.042 false 2.458,2.99 2.615,2.833 false 1.719,2.99 2.063,3.365 false 1.719,3.698 1.917,3.885 false 0.354,2.031 0.583,2.031 false 0.344,3.354 0.573,3.354 false 2.01,0.552 2.333,0.75 0.323,0.198 10 false *e 2.021,0.969 2.25,1.188 0.229,0.219 10 false *f 2.667,2.677 2.875,2.885 0.208,0.208 10 false *d 2.135,3.354 2.427,3.583 0.292,0.229 10 false *c 1.958,3.813 2.229,4.01 0.271,0.198 10 false *g 0.135,3.25 0.365,3.469 0.229,0.219 10 false *a 0.167,1.948 0.406,2.177 0.24,0.229 10 false *b

Mark the position on string 2 in front of the vehicle, 5400 mm (17.7 ft.) from the datum point. (Mark E)

Text in Illustration
*a 1000 mm (3.28 ft.)
*b 5400 mm (17.7 ft.)
*c Datum Point
*d String 1
*e String 2
*f Mark E
*g Mark J


ii.

Mark the position on string 2 to the rear of the vehicle, 1000 mm (3.28 ft.) from the datum point. (Mark J)


iii.
E275619E08
1.479,1.104 1.698,1.021 false 1.719,3.031 2.365,3.146 false 2.146,0.802 2.365,0.719 false 2.146,1.281 2.365,1.198 false 2.396,0.635 2.677,0.854 0.281,0.219 10 false *a 2.448,3.104 2.688,3.313 0.24,0.208 10 false *b 1.302,1.031 1.625,1.198 0.323,0.167 10 false *c 2.417,1.083 2.698,1.302 0.281,0.219 10 false *a

Fix the ends of 2 strings (800 mm [2.62 ft.] long) at 2 positions 400 mm (1.31 ft.) from mark E as shown in the illustration.

Text in Illustration
*a 400 mm (1.31 ft.)
*b String 2
*c Mark E


iv.

Move the free ends of the 2 strings and mark the point where the ends meet. (Marks F and G)

E271119E08
1.667,0.542 1.792,0.708 false 1.625,1.24 1.781,1.063 false 1.313,1.021 1.469,0.885 false 2.146,0.885 2.323,0.75 false 4.938,2.583 5.583,2.583 false 2.135,2.573 2.781,2.573 false 4.104,1.021 4.271,0.896 false 4.75,0.781 4.938,0.885 false 5.615,0.885 5.76,0.729 false 5.26,0.688 5.406,0.531 false 5.271,1.083 5.385,1.26 false 1.51,0.354 1.781,0.552 0.271,0.198 10 false *a 1.125,0.99 1.396,1.188 0.271,0.198 10 false *d 1.469,1.25 1.74,1.448 0.271,0.198 10 false *a 4.573,0.677 4.844,0.875 0.271,0.198 10 false *c 3.927,0.969 4.198,1.167 0.271,0.198 10 false *d 2.354,0.615 2.625,0.813 0.271,0.198 10 false *c 5.417,0.406 5.688,0.604 0.271,0.198 10 false *a 5.438,1.219 5.708,1.417 0.271,0.198 10 false *a 5.813,0.615 6.083,0.813 0.271,0.198 10 false *e 5.646,2.5 5.917,2.698 0.271,0.198 10 false *b 2.854,2.479 3.125,2.677 0.271,0.198 10 false *b

Text in Illustration
*a 800 mm (2.62 ft.) String *b String 2
*c Mark E *d Mark F
*e Mark G - -


v.
E287110E05
1.708,0.792 2.417,0.542 false 2.417,1.344 2.583,1.542 false 1.729,2.427 1.979,2.563 false 1.063,2.167 1.281,2.167 false 1.063,2.656 1.281,2.656 false 2.49,0.458 2.823,0.656 0.333,0.198 10 false *c 2.573,1.563 2.927,1.75 0.354,0.188 10 false *b 2.031,2.469 2.365,2.635 0.333,0.167 10 false *d 0.844,2.063 1.073,2.25 0.229,0.188 10 false *a 0.865,2.552 1.094,2.74 0.229,0.188 10 false *a

Fix the ends of 2 strings (800 mm [2.62 ft.]) at 2 positions 400 mm (1.31 ft.) from mark J as shown in the illustration.

Text in Illustration
*a 400 mm (1.31 ft.)
*b String 1
*c String 2
*d Mark J


vi.

Move the free ends of the 2 strings and mark the point where the ends meet. (Marks K and L)

E287111E04
6.135,1.031 6.313,0.885 false 5.542,1.906 5.708,1.781 false 6.406,1.76 6.208,1.896 false 5.167,2.083 5,2.25 false 4.854,1.906 4.604,2.073 false 2.063,1.615 1.885,1.708 false 5.198,1.719 5.031,1.542 false 1.552,1.896 1.396,1.792 false 1.906,2.083 2.115,2.24 false 5.521,0.604 4.896,0.479 false 0.99,1.031 0.781,0.865 false 1.552,0.656 2.115,0.469 false 2.406,1.802 2.229,1.896 false 0.583,0.76 0.844,0.948 0.26,0.188 10 false *b 2.156,0.344 2.469,0.542 0.313,0.198 10 false *c 4.74,0.385 5,0.563 0.26,0.177 10 false *c 6.365,0.75 6.646,0.938 0.281,0.188 10 false *b 1.208,1.677 1.542,1.844 0.333,0.167 10 false *d 4.458,2.052 4.698,2.229 0.24,0.177 10 false *f 2.458,1.708 2.646,1.875 0.188,0.167 10 false *e 6.448,1.646 6.74,1.854 0.292,0.208 10 false *e 5.75,1.677 6.083,1.844 0.333,0.167 10 false *d 4.875,1.375 5.125,1.563 0.25,0.188 10 false *a 2.104,1.5 2.385,1.667 0.281,0.167 10 false *a 2.156,2.177 2.427,2.375 0.271,0.198 10 false *a 4.833,2.208 5.115,2.417 0.281,0.208 10 false *a

Text in Illustration
*a 800 mm (2.62 ft.) String *b String 1
*c String 2 *d Mark J
*e Mark K *f Mark L


vii.
E287712E04
1.229,0.833 1.344,1.052 false 2,1.063 2.26,1.365 false 2.302,1.052 2.646,0.698 false 2.5,1.063 2.677,1.198 false 2.656,3.615 2.75,3.458 false 2.313,3.635 2.542,3.885 false 2.01,3.615 2.115,3.448 false 1.354,3.625 1.188,3.396 false 2.031,0.573 1.979,0.75 false 2.031,4.104 1.969,3.938 false 1.99,0.375 2.26,0.563 0.271,0.188 10 false *a 2.01,4.146 2.281,4.385 0.271,0.24 10 false *a 1.052,0.625 1.365,0.823 0.313,0.198 10 false *d 2.688,0.531 3,0.729 0.313,0.198 10 false *f 2.635,1.219 2.865,1.396 0.229,0.177 10 false *b 2.229,1.396 2.542,1.594 0.313,0.198 10 false *e 2.677,3.271 2.948,3.448 0.271,0.177 10 false *c 2.083,3.25 2.396,3.448 0.313,0.198 10 false *g 2.563,3.917 2.875,4.115 0.313,0.198 10 false *i 1.052,3.219 1.365,3.417 0.313,0.198 10 false *h

Secure strings 3 and 4 so that they pass through marks F and G and marks K and L as shown in the illustration.

NOTICE:

When securing the string, check that there is no slack and the string is not twisted.


Text in Illustration
*a 1500 mm (4.92 ft.)
*b String 3
*c String 4
*d Mark F
*e Mark G
*f Mark I
*g Mark K
*h Mark L
*i Mark N


viii.

Mark strings 3 and 4, 1500 mm (4.92 ft.) to the right of the vehicle center line (string 2). (Marks I and N)


ix.
E287713E05
2.01,0.802 2.198,0.677 false 1.844,0.865 2.021,1.021 false 2.188,1.427 2.021,1.531 false 2.167,1.771 2.021,1.677 false 2.156,2.094 2.021,2.208 false 1.906,2.469 2.01,2.354 false 0.563,3.156 0.74,3.156 0.74,3.156 0.74,2.969 false 3.031,2.49 3.031,2.333 3.031,2.333 3.167,2.333 false 1.854,3.792 2.01,3.615 false 2.74,2.49 2.74,2.333 2.74,2.333 2.875,2.333 false 2.479,2.688 2.479,2.531 2.479,2.531 2.615,2.531 false 2.198,2.708 2.198,2.552 2.198,2.552 2.333,2.552 false 1.698,0.667 2.01,0.865 0.313,0.198 10 false *g 2.229,0.573 2.76,0.813 0.531,0.24 10 false *f 2.229,1.323 2.417,1.521 0.188,0.198 10 false *l 2.208,1.698 2.469,1.885 0.26,0.188 10 false *k 2.198,1.958 2.406,2.167 0.208,0.208 10 false *j 1.833,2.51 1.979,2.708 0.146,0.198 10 false *i 0.344,3.063 0.813,3.313 0.469,0.25 10 false *e 1.719,3.771 2.031,3.969 0.313,0.198 10 false *h 2.969,2.51 3.167,2.708 0.198,0.198 10 false *d 2.677,2.5 2.875,2.698 0.198,0.198 10 false *c 2.385,2.719 2.583,2.917 0.198,0.198 10 false *b 2.115,2.719 2.313,2.917 0.198,0.198 10 false *a

Secure string 6 so that it passes through marks I and N as shown in the illustration.

NOTICE:

When securing the string, check that there is no slack and the string is not twisted.


Text in Illustration
*a 2200 mm (7.22 ft.)
*b 2400 mm (7.87 ft.)
*c 3400 mm (11.2 ft.)
*d 3600 mm (11.8 ft.)
*e String 1
*f String 6
*g Mark I
*h Mark N
*i Mark S
*j Mark T
*k Mark U
*l Mark V


x.

Make marks on string 6 that are 2200 mm (7.22 ft.), 2400 mm (7.87 ft.), 3400 mm (11.2 ft.), and 3600 mm (11.8 ft.) from the datum line (string 1) as shown in the illustration. (Marks S, T, U and V)


xi.
E287108E05
1.5,0.583 2.292,0.917 false 2.479,1.49 2.323,1.573 false 2.51,1.823 2.323,1.76 false 2.458,2.49 2.333,2.406 false 2.552,3.313 2.354,3.208 false 3.167,1.333 3.167,1.031 3.167,1.031 3.063,1.031 false 2.615,3.01 2.771,2.844 false 2.323,0.667 2.656,0.469 false 2.323,0.396 2.323,0.177 2.323,0.177 2.198,0.177 false 1.979,3.74 1.823,3.74 1.823,3.74 1.823,3.938 false 2.323,3.625 2.531,3.802 false 2.49,2.177 2.333,2.219 false 2.333,1.01 2.625,0.844 false 2.573,2.323 2.354,2.323 false 2.594,1.656 2.354,1.656 false 1.292,0.49 1.615,0.656 0.323,0.167 10 false *d 1.771,3.969 2.073,4.146 0.302,0.177 10 false *c 2.615,3.281 2.875,3.448 0.26,0.167 10 false *d 2.823,2.729 3.063,2.885 0.24,0.156 10 false *f 3.094,1.354 3.313,1.531 0.219,0.177 10 false *a 2.646,0.708 2.979,0.875 0.333,0.167 10 false *h 2.688,0.323 2.875,0.542 0.188,0.219 10 false *g 2.021,0.104 2.208,0.25 0.188,0.146 10 false *b 2.479,1.354 2.698,1.563 0.219,0.208 10 false *m 2.542,1.771 2.76,1.938 0.219,0.167 10 false *l 2.531,2.063 2.865,2.229 0.333,0.167 10 false *k 2.49,2.438 2.729,2.656 0.24,0.219 10 false *j 2.604,1.563 2.823,1.771 0.219,0.208 10 false *e 2.594,2.24 2.813,2.448 0.219,0.208 10 false *e 2.594,3.792 2.854,3.958 0.26,0.167 10 false *i

Place and secure the cross check markers, centered on marks I and N.

NOTICE:
·

Align the cross check markers perpendicular to the string.

·

Make each arm of the cross check markers 800 mm (2.62 ft.) long and 100 mm (0.33 ft.) wide.

·

Extend the rear cross check markers to string 1.



Text in Illustration
*a 100 mm (0.33 ft.)
*b 800 mm (2.62 ft.)
*c 400 mm (1.31 ft.)
*d Cross Check Marker
*e String 1
*f String 6
*g Mark I
*h Mark N
*i Mark S
*j Mark T
*k Mark U
*l Mark V


xii.

Place check markers between marks S and T, and marks U and V.


xiii.

Perform camera view adjustment (calibration) (procedure 8).




PROCEDURE 7: SET MARKERS (When checking all cameras)


a.

Set markers in every direction from the vehicle.

i.
E287145E05
1.719,0.76 1.917,0.677 false 1.719,1.042 1.938,1.042 false 2.458,2.99 2.615,2.833 false 1.719,2.99 2.063,3.365 false 1.719,3.698 1.917,3.885 false 0.354,2.031 0.583,2.031 false 0.344,3.354 0.573,3.354 false 2.01,0.552 2.333,0.75 0.323,0.198 10 false *e 2.021,0.969 2.25,1.188 0.229,0.219 10 false *f 2.667,2.677 2.875,2.885 0.208,0.208 10 false *d 2.135,3.354 2.427,3.583 0.292,0.229 10 false *c 1.958,3.813 2.229,4.01 0.271,0.198 10 false *g 0.135,3.25 0.365,3.469 0.229,0.219 10 false *a 0.167,1.948 0.406,2.177 0.24,0.229 10 false *b

Mark the position on string 2 in front of the vehicle, 5400 mm (17.71 ft.) from the datum point. (Mark E)

Text in Illustration
*a 1000 mm (3.28 ft.)
*b 5400 mm (17.71 ft.)
*c Datum Point
*d String 1
*e String 2
*f Mark E
*g Mark J


ii.

Mark the position on string 2 to the rear of the vehicle, 1000 mm (3.28 ft.) from the datum point. (Mark J)


iii.
E275619E08
1.479,1.104 1.698,1.021 false 1.719,3.031 2.365,3.146 false 2.146,0.802 2.365,0.719 false 2.146,1.281 2.365,1.198 false 2.396,0.635 2.677,0.854 0.281,0.219 10 false *a 2.448,3.104 2.688,3.313 0.24,0.208 10 false *b 1.302,1.031 1.625,1.198 0.323,0.167 10 false *c 2.417,1.083 2.698,1.302 0.281,0.219 10 false *a

Fix the ends of 2 strings (800 mm [2.62 ft.] long) at 2 positions 400 mm (1.31 ft.) from mark E as shown in the illustration.

Text in Illustration
*a 400 mm (1.31 ft.)
*b String 2
*c Mark E


iv.

Move the free ends of the 2 strings and mark the point where the ends meet. (Marks F and G)

E271119E08
1.667,0.542 1.792,0.708 false 1.625,1.24 1.781,1.063 false 1.313,1.021 1.469,0.885 false 2.146,0.885 2.323,0.75 false 4.938,2.583 5.583,2.583 false 2.135,2.573 2.781,2.573 false 4.104,1.021 4.271,0.896 false 4.75,0.781 4.938,0.885 false 5.615,0.885 5.76,0.729 false 5.26,0.688 5.406,0.531 false 5.271,1.083 5.385,1.26 false 1.51,0.354 1.781,0.552 0.271,0.198 10 false *a 1.125,0.99 1.396,1.188 0.271,0.198 10 false *d 1.469,1.25 1.74,1.448 0.271,0.198 10 false *a 4.573,0.677 4.844,0.875 0.271,0.198 10 false *c 3.927,0.969 4.198,1.167 0.271,0.198 10 false *d 2.354,0.615 2.625,0.813 0.271,0.198 10 false *c 5.417,0.406 5.688,0.604 0.271,0.198 10 false *a 5.438,1.219 5.708,1.417 0.271,0.198 10 false *a 5.813,0.615 6.083,0.813 0.271,0.198 10 false *e 5.646,2.5 5.917,2.698 0.271,0.198 10 false *b 2.854,2.479 3.125,2.677 0.271,0.198 10 false *b

Text in Illustration
*a 800 mm (2.62 ft.) String *b String 2
*c Mark E *d Mark F
*e Mark G - -


v.
E287110E05
1.708,0.792 2.417,0.542 false 2.417,1.344 2.583,1.542 false 1.729,2.427 1.979,2.563 false 1.063,2.167 1.281,2.167 false 1.063,2.656 1.281,2.656 false 2.49,0.458 2.823,0.656 0.333,0.198 10 false *c 2.573,1.563 2.927,1.75 0.354,0.188 10 false *b 2.031,2.469 2.365,2.635 0.333,0.167 10 false *d 0.844,2.063 1.073,2.25 0.229,0.188 10 false *a 0.865,2.552 1.094,2.74 0.229,0.188 10 false *a

Fix the ends of 2 strings (800 mm [2.62 ft.]) at 2 positions 400 mm (1.31 ft.) from mark J as shown in the illustration.

Text in Illustration
*a 400 mm (1.31 ft.)
*b String 1
*c String 2
*d Mark J


vi.

Move the free ends of the 2 strings and mark the point where the ends meet. (Marks K and L)

E287111E04
6.135,1.031 6.313,0.885 false 5.542,1.906 5.708,1.781 false 6.406,1.76 6.208,1.896 false 5.167,2.083 5,2.25 false 4.854,1.906 4.604,2.073 false 2.063,1.615 1.885,1.708 false 5.198,1.719 5.031,1.542 false 1.552,1.896 1.396,1.792 false 1.906,2.083 2.115,2.24 false 5.521,0.604 4.896,0.479 false 0.99,1.031 0.781,0.865 false 1.552,0.656 2.115,0.469 false 2.406,1.802 2.229,1.896 false 0.583,0.76 0.844,0.948 0.26,0.188 10 false *b 2.156,0.344 2.469,0.542 0.313,0.198 10 false *c 4.74,0.385 5,0.563 0.26,0.177 10 false *c 6.365,0.75 6.646,0.938 0.281,0.188 10 false *b 1.208,1.677 1.542,1.844 0.333,0.167 10 false *d 4.458,2.052 4.698,2.229 0.24,0.177 10 false *f 2.458,1.708 2.646,1.875 0.188,0.167 10 false *e 6.448,1.646 6.74,1.854 0.292,0.208 10 false *e 5.75,1.677 6.083,1.844 0.333,0.167 10 false *d 4.875,1.375 5.125,1.563 0.25,0.188 10 false *a 2.104,1.5 2.385,1.667 0.281,0.167 10 false *a 2.156,2.177 2.427,2.375 0.271,0.198 10 false *a 4.833,2.208 5.115,2.417 0.281,0.208 10 false *a

Text in Illustration
*a 800 mm (2.62 ft.) String *b String 1
*c String 2 *d Mark J
*e Mark K *f Mark L


vii.
E287148E05
0.729,0.75 0.885,0.75 0.885,0.75 1.094,1.052 false 1.083,1.365 1.25,1.365 1.25,1.365 1.396,1.073 false 2.292,1.396 2.135,1.396 2.135,1.396 2.042,1.063 false 2.74,0.448 2.583,0.448 2.583,0.448 2.354,1.052 false 2.833,0.833 2.708,0.833 2.708,0.833 2.573,1.052 false 2.26,3.26 2.125,3.26 2.125,3.26 2.042,3.448 false 2.75,4.177 2.604,4.177 2.604,4.177 2.365,3.458 false 2.76,3.75 2.646,3.75 2.646,3.75 2.563,3.458 false 2.021,4.281 1.906,4.281 1.906,4.281 1.719,4 false 0.833,3.719 0.969,3.719 0.969,3.719 1.083,3.458 false 1.135,3.25 1.281,3.25 1.281,3.25 1.406,3.448 false 2.01,0.76 2.031,0.646 false 1.375,0.76 1.344,0.646 false 1.365,3.875 1.385,3.76 false 2.063,3.875 2.031,3.76 false 1.24,0.469 1.51,0.656 0.271,0.188 10 false *a 0.531,0.635 0.865,0.823 0.333,0.188 10 false *g 2.896,0.75 3.167,0.958 0.271,0.208 10 false *c 2.813,0.354 3.26,0.542 0.448,0.188 10 false *h 0.906,1.271 1.354,1.458 0.448,0.188 10 false *e 2.406,1.323 2.646,1.51 0.24,0.188 10 false *f 2.333,3.156 2.781,3.344 0.448,0.188 10 false *i 0.958,3.156 1.406,3.344 0.448,0.188 10 false *j 0.604,3.625 1.052,3.813 0.448,0.188 10 false *k 2.823,4.104 3.271,4.292 0.448,0.188 10 false *l 2.833,3.688 3.281,3.875 0.448,0.188 10 false *d 2.104,4.198 2.552,4.385 0.448,0.188 10 false *b 1.958,0.458 2.229,0.646 0.271,0.188 10 false *a 1.26,3.854 1.531,4.042 0.271,0.188 10 false *a 2.021,3.865 2.292,4.052 0.271,0.188 10 false *a

Secure strings 3 and 4 so that they pass through marks F, G, K and L as shown in the illustration.

NOTICE:

Secure strings 3 and 4 so that they pass through marks F, G, K and L as shown in the illustration.


Text in Illustration
*a 1500 mm (4.92 ft.)
*b String 2
*c String 3
*d String 4
*e Mark F
*f Mark G
*g Mark H
*h Mark I
*i Mark K
*j Mark L
*k Mark M
*l Mark N


viii.

Mark string 3, 1500 mm (4.92 ft.) to the left and right of the vehicle center line (string 2). (Marks H and I)


ix.

Mark string 4, 1500 mm (4.92 ft.) to the left and right of the vehicle center line (string 2). (Marks M and N)


x.
E287132E06
1.094,0.76 1.271,0.625 false 2.302,0.75 2.448,0.615 false 2.604,1 2.771,0.833 false 2.469,1.188 2.302,1.01 false 0.896,1.167 1.094,1.01 false 0.542,3.406 0.719,3.594 false 0.906,3.771 1.094,3.594 false 1.552,3.938 1.719,3.792 false 2.51,3.771 2.313,3.594 false 2.698,2.792 2.583,2.958 false 1.302,0.51 1.563,0.708 0.26,0.198 10 false *e 2.49,0.479 2.75,0.698 0.26,0.219 10 false *f 2.813,0.698 3.042,0.906 0.229,0.208 10 false *c 2.479,1.219 2.719,1.417 0.24,0.198 10 false *h 0.74,1.125 1.042,1.333 0.302,0.208 10 false *g 0.406,3.219 0.667,3.417 0.26,0.198 10 false *d 0.76,3.719 0.979,3.927 0.219,0.208 10 false *i 1.344,3.885 1.542,4.094 0.198,0.208 10 false *b 2.552,3.75 2.75,3.99 0.198,0.24 10 false *j 2.698,2.615 2.958,2.844 0.26,0.229 10 false *a

Secure strings 5 and 6 so that they pass through marks H, M, I and N as shown in the illustration.

NOTICE:

When securing the string, check that there is no slack and the string is not twisted.


Text in Illustration
*a String 1
*b String 2
*c String 3
*d String 4
*e String 5
*f String 6
*g Mark H
*h Mark I
*i Mark M
*j Mark N


xi.
E288356E05
2.615,2.521 2.5,2.521 2.5,2.521 2.5,2.646 false 2.344,2.521 2.229,2.521 2.229,2.521 2.229,2.646 false 3.167,2.292 3.052,2.292 3.052,2.292 3.052,2.406 false 2.885,2.292 2.771,2.292 2.771,2.292 2.771,2.406 false 2.021,2.198 2.135,2.021 2.135,2.021 2.26,2.021 false 2.021,1.531 2.135,1.354 2.135,1.354 2.26,1.354 false 2.333,1.021 2.458,0.844 2.458,0.844 2.573,0.844 false 2.021,0.677 2.135,0.5 2.135,0.5 2.25,0.5 false 1.396,0.688 1.281,0.51 1.281,0.51 1.156,0.51 false 0.781,0.688 0.656,0.51 0.656,0.51 0.542,0.51 false 2.021,1.677 2.135,1.854 2.135,1.854 2.26,1.854 false 2.323,3.604 2.448,3.781 2.448,3.781 2.563,3.781 false 0.771,1.521 0.646,1.344 0.646,1.344 0.531,1.344 false 0.792,1.677 0.667,1.854 0.667,1.854 0.552,1.854 false 0.781,2.208 0.656,2.031 0.656,2.031 0.542,2.031 false 0.781,2.354 0.656,2.531 0.656,2.531 0.542,2.531 false 0.573,2.979 0.573,3.156 0.573,3.156 0.448,3.156 false 2.021,2.354 1.917,2.479 false 2.115,2.646 2.292,2.813 0.177,0.167 10 false *a 2.396,2.656 2.573,2.823 0.177,0.167 10 false *b 2.667,2.427 2.844,2.594 0.177,0.167 10 false *c 2.958,2.427 3.135,2.594 0.177,0.167 10 false *d 2.594,3.698 2.771,3.865 0.177,0.167 10 false *h 1.792,2.5 1.969,2.667 0.177,0.167 10 false *o 2.302,1.938 2.479,2.104 0.177,0.167 10 false *p 2.281,1.75 2.458,1.917 0.177,0.167 10 false *q 2.302,1.25 2.479,1.417 0.177,0.167 10 false *r 2.594,0.729 2.813,0.958 0.219,0.229 10 false *g 2.302,0.406 2.479,0.573 0.177,0.167 10 false *j 0.958,0.406 1.135,0.573 0.177,0.167 10 false *f 0.365,0.427 0.542,0.594 0.177,0.167 10 false *i 0.333,1.24 0.51,1.406 0.177,0.167 10 false *n 0.292,1.74 0.521,1.906 0.229,0.167 10 false *m 0.344,1.948 0.521,2.115 0.177,0.167 10 false *l 0.344,2.438 0.521,2.604 0.177,0.167 10 false *k 0.25,3.052 0.427,3.219 0.177,0.167 10 false *e

Make marks on string 5 that are 2200 mm (7.22 ft.), 2400 mm (7.87 ft.), 3400 mm (11.2 ft.), and 3600 mm (11.8 ft.) from the datum line (string 1) as shown in the illustration. (Marks O, P, Q and R)

Text in Illustration
*a 2200 mm (7.22 ft.)
*b 2400 mm (7.87 ft.)
*c 3400 mm (11.2 ft.)
*d 3600 mm (11.8 ft.)
*e String 1
*f String 2
*g String 3
*h String 4
*i String 5
*j String 6
*k Mark O
*l Mark P
*m Mark Q
*n Mark R
*o Mark S
*p Mark T
*q Mark U


xii.

Make marks on string 6 that are 2200 mm (7.22 ft.), 2400 mm (7.87 ft.), 3400 mm (11.2 ft.), and 3600 mm (11.8 ft.) from the datum line (string 1) as shown in the illustration. (Marks S, T, U and V)


xiii.

Place and secure the cross check markers, centered on marks H, I, M and N.

NOTICE:
·

Align the cross check markers perpendicular to the string.

·

Make each arm of the cross check markers 800 mm (2.62 ft.) long and 100 mm (0.33 ft.) wide.

·

Extend the rear cross check markers to string 1.



E287112E05
4.25,2.052 4.438,1.969 false 4.26,2.792 4.438,2.708 false 4.25,2.25 4.438,2.333 false 4.25,2.99 4.458,3.083 false 2.708,2.344 2.896,2.25 false 2.688,3.083 2.896,2.979 false 2.708,1.938 2.906,2.052 false 2.688,2.656 2.885,2.792 false 4.365,1.406 4.594,1.177 false 4.281,2.885 5.573,2.458 5.573,2.458 4.292,2.146 false 2.573,1.24 2.896,1.427 false 4.26,0.26 4.26,0.167 4.26,0.167 4.677,0.167 false 2.615,4.573 2.896,4.365 false 4.521,4.563 4.26,4.365 false 3.917,5.448 3.781,5.448 3.781,5.448 3.594,4.406 false 3.208,4.646 3.208,4.375 false 3.958,4.615 3.958,4.375 false 4.844,3.708 5.063,3.51 false 3.063,0.219 3.26,0.219 3.26,0.219 3.573,1.417 false 4.26,1.438 4.438,1.635 false 2.604,1 2.896,1.208 false 5.479,1.448 5.688,1.448 false 2.865,2.906 1.396,2.5 1.396,2.5 2.865,2.146 false 4.49,4.802 4.26,4.583 false 2.635,4.875 2.906,4.583 false 3.979,5.375 4.25,5.552 0.271,0.177 10 false *d 3.135,4.698 3.385,4.865 0.25,0.167 10 false *k 2.458,4.813 2.677,5.01 0.219,0.198 10 false *c 3.906,4.656 4.188,4.885 0.281,0.229 10 false *j 4.573,4.49 4.875,4.698 0.302,0.208 10 false *m 5.063,3.385 5.385,3.625 0.323,0.24 10 false *e 4.5,3.01 4.833,3.177 0.333,0.167 10 false *r 4.469,2.604 4.802,2.771 0.333,0.167 10 false *s 4.469,1.854 4.802,2.021 0.333,0.167 10 false *u 5.75,1.365 6.063,1.573 0.313,0.208 10 false *a 4.635,1.063 4.854,1.24 0.219,0.177 10 false *c 4.729,0.083 5.042,0.292 0.313,0.208 10 false *b 2.875,0.125 3.083,0.333 0.208,0.208 10 false *d 2.385,1.135 2.719,1.302 0.333,0.167 10 false *h 2.521,1.833 2.917,2.083 0.396,0.25 10 false *q 2.531,2.26 2.792,2.469 0.26,0.208 10 false *p 2.5,2.531 2.729,2.719 0.229,0.188 10 false *o 2.521,3.063 2.854,3.229 0.333,0.167 10 false *n 1.146,2.406 1.417,2.625 0.271,0.219 10 false *d 4.479,1.604 4.813,1.771 0.333,0.167 10 false *i 2.427,0.885 2.635,1.083 0.208,0.198 10 false *c 4.49,2.281 4.823,2.448 0.333,0.167 10 false *f 5.677,2.427 6.01,2.594 0.333,0.167 10 false *d 4.542,4.75 4.844,4.958 0.302,0.208 10 false *c 2.438,4.521 2.656,4.719 0.219,0.198 10 false *l

Text in Illustration
*a 100 mm (0.33 ft.) *b 800 mm (2.62 ft.)
*c Cross Check Marker *d Check Marker
*e String 1 *f Mark F
*g Mark G *h Mark H
*i Mark I *j Mark K
*k Mark L *l Mark M
*m Mark N *n Mark O
*o Mark P *p Mark Q
*q Mark R *r Mark S
*s Mark T *t Mark U
*u Mark V - -


xiv.

Place check markers between marks F and G, marks K and L, marks O and P, marks Q and R, marks S and T, and marks U and V.


xv.

Perform camera view adjustment (calibration) (procedure 8).




PROCEDURE 8: CAMERA VIEW ADJUSTMENT (CALIBRATION)


a.

Enter diagnostic mode.


NOTICE:

The check must be performed with the engine starts. Therefore, apply the parking brake, depress the brake pedal and move the shift lever to P to ensure that the vehicle does not begin moving unexpectedly.



b.
E271944

Select "Function Check/Setting" from the "Service Menu" screen.


c.
E339651

Select "Camera Setting" on the "Function Check/Setting I" screen to display the Mode Setting screen.


d.
E296733

Select "View Adjustment" on the Mode Setting screen to display the adjustment screen.

HINT:

To select a grayed out item, select and hold the item for 2 seconds or more.



e.
E340085

After checking the screen, press the "NEXT" button on the "Signal Check" screen.

HINT:
·

When "CHK" (red) is displayed, perform the inspections.

·

If performing the adjustment after proceeding to the next screen, confirm that all items display "OK" (blue) before selecting "Next".




f.

Perform the view adjustment.

E339650E03
2.021,0.625 1.771,0.115 1.771,0.115 1.656,0.115 true 2.792,0.615 3.042,0.104 3.042,0.104 3.146,0.104 true 3.51,0.781 3.854,0.115 3.854,0.115 3.958,0.115 true 4.5,0.333 4.604,0.115 4.604,0.115 4.719,0.115 true 2.396,0.604 2.396,0.167 true 2.031,2.156 1.781,2.677 1.781,2.677 1.667,2.677 true 2.792,2.167 3.042,2.688 3.042,2.688 3.146,2.688 true 2.396,2.198 2.396,2.625 true 2.781,0.948 2.781,0.833 2.781,0.833 1.531,0.833 true 2.021,0.948 2.021,0.833 false 2.781,1.365 2.781,1.25 2.781,1.25 1.531,1.25 true 2.031,1.365 2.031,1.25 false 2.823,1.885 2.823,1.771 2.823,1.771 1.573,1.771 true 2.063,1.885 2.063,1.771 false 5.208,1.26 5.49,1.26 true 2.76,1.896 2.76,1.781 false 2.01,1.885 2.01,1.771 false 1.49,0.021 1.74,0.208 0.25,0.188 10 false *b 3.167,0.021 3.417,0.208 0.25,0.188 10 false *b 2.302,0 2.552,0.188 0.25,0.188 10 false *a 1.365,0.74 1.615,0.927 0.25,0.188 10 false *a 1.365,1.156 1.615,1.344 0.25,0.188 10 false *a 1.375,1.667 1.625,1.854 0.25,0.188 10 false *a 2.313,2.604 2.563,2.792 0.25,0.188 10 false *a 3.167,2.594 3.417,2.781 0.25,0.188 10 false *b 1.5,2.573 1.75,2.76 0.25,0.188 10 false *b 3.969,0.021 4.219,0.208 0.25,0.188 10 false *c 4.74,0.021 4.99,0.208 0.25,0.188 10 false *d 5.51,1.177 5.76,1.365 0.25,0.188 10 false *e

Text in Illustration
*a Red Line *b Cross Check Marker
*c Adjustment Button *d Camera Select Button
*e Height Control Button - -

NOTICE:

If replacing a camera, select the repaired camera and press "New Camera".



g.

Check that the cross check markers displayed on the adjustment screen appear connected.

E271143

NOTICE:
·

Before checking the adjustment screen, ensure that the check markers have been placed correctly.

·

a cross check marker appears displaced on the adjustment screen, use the camera select buttons to select the corresponding camera, and then use the adjustment buttons or vehicle height adjustment buttons to adjust the screen.



E326702E03
0.823,1.865 2.281,2.104 1.458,0.24 10 false When selecting button 4.729,0.188 6.323,0.448 1.594,0.26 10 false After selecting the button 5.479,1.885 6.906,2.167 1.427,0.281 10 false Button selected 5.479,3.625 6.698,3.865 1.219,0.24 10 false Button selected 5.479,5.417 6.688,5.677 1.208,0.26 10 false Button selected 5.479,7.344 6.74,7.615 1.26,0.271 10 false Button selected

HINT:

If adjustment is needed, select "All View Reset" button and reset all adjustment values.



h.

Confirm the check marker is in the adjustment screen.

E271144

NOTICE:
·

Before checking the adjustment screen, ensure that the check markers have been placed correctly.

·

If a check marker appears displaced on the adjustment screen, use the camera select buttons to select the corresponding camera, and then use the adjustment buttons or vehicle height adjustment buttons to adjust the screen.



E326702E03
0.823,1.865 2.281,2.104 1.458,0.24 10 false When selecting button 4.729,0.188 6.323,0.448 1.594,0.26 10 false After selecting the button 5.479,1.885 6.906,2.167 1.427,0.281 10 false Button selected 5.479,3.625 6.698,3.865 1.219,0.24 10 false Button selected 5.479,5.417 6.688,5.677 1.208,0.26 10 false Button selected 5.479,7.344 6.74,7.615 1.26,0.271 10 false Button selected

HINT:

If performing adjustment again, select "All View Reset" to initialize the adjustment status.



i.
E299606

When all adjustments are completed, press "OK".


j.

If data writing ends normally, "The view data writing was completed." is displayed.


k.

Press "OK".




PROCEDURE 9: STEERING ANGLE SETTING


a.

Preparation for adjustment

i.

Park the vehicle with the steering wheel centered.

HINT:

Before parking the vehicle, be sure to move the vehicle forward and in reverse to check that the tires are facing straight ahead with the steering wheel centered.



ii.

Adjust the tire pressure to the specified value(s).



b.

Start the diagnostic mode.

NOTICE:

The following must be carried out with the engine starts. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.



c.
E271944

Select "Function Check/Setting" on the "Service Menu" screen.


d.
E339651

Select "Camera Setting" on the "Function Check/Setting I" screen.


e.
E296733

Select "Steering Angle Setting" on the Mode Setting screen to display the Signal Check screen.

HINT:

To select a grayed out item, select and hold the item for 2 seconds or more.



f.
E340085

Select "Next" on the Signal Check screen to display the Steering Angle Setting screen.

NOTICE:
·

If "CHK" (red) is displayed for an item on the Signal Check screen, selecting "Next" will not change to the Steering Angle Setting screen.

·

Check the Signal Check screen when "CHK" (red) is displayed for an item on the Signal Check screen.




g.

Adjust the steering angle

i.
E299607

Check that the steering wheel is centered (approximately +/- 5 degrees or less) and then select "STEERING CENTER MEMORIZE".


ii.

Turn the steering wheel fully to the left and fully to the right, and then press "MAX STEERING ANGLE MEMORIZE". (Turning right and then left is OK)


iii.

When "MAX STEERING ANGLE MEMORIZE" is selected, the system beeps, the steering angle setting values (steering neutral point and maximum steering angle) are stored, and the Mode Setting screen is displayed again.

HINT:
·

A beep will sound to confirm that the adjustment values have been stored.

·

If all signals are input normally, the Mode Setting screen is displayed automatically after the maximum steering angle is stored.

·

If steering angle setting is incomplete, "OK" cannot be selected.

·

Even if no DTC is detected, a steering angle sensor malfunction may disable the use of "MAX STEERING ANGLE MEMORIZE".

·

If selecting "MAX STEERING ANGLE MEMORIZE" does not cause the adjustment value to be stored after adjusting the steering angle, replace the steering sensor (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>STEERING ANGLE SENSOR>REMOVAL).






i.

Confirm steering angle adjustment.

HINT:

If the steering angle has been adjusted, confirm the steering angle adjustment on the multi-terrain monitor screen after finishing diagnosis mode.



j.

Check on the multi-terrain monitor screen that the estimated course line moves until the steering wheel is fully turned to either the left or right.

HINT:

If the estimated course line stops moving before the steering wheel is fully turned to either the left or right, the steering angle adjustment values have not been stored correctly. In this case, perform "STEERING CENTER MEMORIZE" and "MAX STEERING ANGLE MEMORIZE" again.