Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING ASSIST MONITOR SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255517 PARKING ASSIST MONITOR SYSTEM D

PARK ASSIST / MONITORING  PARKING ASSIST MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


*1: w/ Variable Gear Ratio Steering System

*2: w/ TOYOTA Parking Assist-Sensor System

*3: w/ Blind Spot Monitor System


a.

This system has a rear television camera assembly mounted on the back door to display an image of the area behind the vehicle on the multi-display assembly. The multi-display assembly also shows a composite view consisting of the area behind the vehicle and parking guide lines to assist the driver in parking the vehicle by monitoring the area behind the vehicle.


b.

This system consists of the following components:

i.

Rear television camera assembly


ii.

Multi-media module receiver assembly


iii.

Multi-display assembly


iv.

Steering sensor


v.

Main body ECU (multiplex network body ECU)


vi.

Combination meter assembly


vii.

Steering control ECU*1


viii.

Clearance warning ECU assembly*2


ix.

Park/neutral position switch assembly


x.

Blind spot monitor sensor LH*3



c.

This system is equipped with a self-diagnosis system, which is operated from a designated window that appears on the multi-display assembly.



FUNCTION OF COMPONENTS


a.

The multi-media module receiver assembly controls the system by using information from the following components.

Item Function
Rear Television Camera Assembly
·

Mounted on the back door to transmit an image of the area behind the vehicle to the multi-media module receiver assembly.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and wide-angle lens.


Multi-media Module Receiver Assembly
·

Receives video signals, which contain an image of the area behind the vehicle taken with the rear television camera assembly.

·

Performs overall control of the system by receiving signals from the sensors.

·

Creates images and displays adjustment screens performed in DIAGNOSTIC mode.

·

Stops displaying the guide lines and buttons and displays "Check surrounding for safety" when an open signal is received for the back door.

·

Displays "Back door is open. Do not use the rear view monitor when the back door is not completely closed." on the back camera position setting screen when an open signal is received for the back door.

·

Performs control of the system by receiving the reverse signal from the park/neutral position switch assembly.


Multi-display Assembly Receives the video signals containing a composite of an image of the area behind the vehicle and parking assist guide line signals from the multi-media module receiver assembly, and displays them on the multi-display.
Steering Sensor Detects the angle of the steering wheel and transmits the resulting signals to the multi-media module receiver assembly via CAN communication.
Combination Meter Assembly Transmits a vehicle speed signal to the multi-media module receiver assembly via CAN communication.
Main Body ECU (Multiplex Network Body ECU)
·

Transmits a back door courtesy switch signal to the multi-media module receiver assembly via CAN communication.

·

Transmits a vehicle information signal to the rear television camera assembly via CAN communication.


Steering Control ECU*1 Transmits a VGRS relative angle signal to the multi-media module receiver assembly via CAN communication.
Clearance Warning ECU Assembly*2 Transmits a sonar information signal to the multi-media module receiver assembly via CAN communication.
Blind Spot Monitor Sensor LH*3 Transmits a RCTA information signal to the multi-media module receiver assembly via CAN communication.
Park/Neutral Position Switch Assembly Transmits a reverse signal to the multi-media module receiver assembly.



OPERATION EXPLANATION


a.

The multi-media module receiver assembly receives the reverse signal when the engine switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the multi-display switches to the parking assist monitor system.



DISPLAY MODE


E333716E02
0.24,1.833 0.438,1.833 true 0.073,1.729 0.385,1.927 0.313,0.198 10 false *a 1.198,1.979 1.51,2.177 0.313,0.198 10 false *b 3.583,1.969 3.896,2.167 0.313,0.198 10 false *c 5.969,1.958 6.281,2.156 0.313,0.198 10 false *d 0.521,2.417 0.833,2.615 0.313,0.198 10 false *e

Text in Illustration
*a Display Mode Switch Screen Button *b Estimated Course Line Display Mode
*c Parking Assist Guide Line Display Mode *d Distance Guide Line Display Mode
*e Display Mode Switch Screen Button Pressed - -

a.

While the parking assist monitor is displayed on the multi-display, pressing the display mode switch screen button switches the parking assist monitor display mode.

Parking Assist Monitor Display Mode
Parking Assist Monitor Display Mode Distance Guide Lines
(Red)
Estimated Course Lines
(Yellow)
Distance Guide Line
(Yellow)
Vehicle Width Extension Guide Line
(Blue)
Distance Guide Line
(Blue)
Parking Assist Guide Lines
(Blue)
Vehicle Center Line
(Blue)
Estimated course line display mode Displayed Displayed Displayed Displayed Displayed Not displayed Displayed
Parking assist guide line display mode Displayed Not displayed Not displayed Displayed Not displayed Displayed Displayed
Distance guide line display mode Displayed Not displayed Not displayed Not displayed Not displayed Not displayed Not displayed



DIAGNOSTIC FUNCTION OUTLINE


a.

This parking assist monitor system has a diagnostic function displayed on the multi-display assembly. This function enables calibration (adjustment and verification) of the parking assist monitor system (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING ASSIST MONITOR SYSTEM>DIAGNOSIS SYSTEM).


b.

The following items for the parking assist monitor system can be checked using the GTS.

Item Proceed to
DTC (Click here)