Home › Vehicle Interior › DOOR LOCK › BACK DOOR LOCK › 2015.08–2017.08
RM2660E _58 Vehicle Interior _052838 DOOR LOCK _0255543 BACK DOOR LOCK A

DOOR LOCK  BACK DOOR LOCK  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

When installing a new back door lock assembly, if there is any tape stuck to it, remove the tape.

·

When installing a new back door lock assembly, if there are any strings attached to it, cut the strings off.



PROCEDURE

Hide 69350 1.INSTALL BACK DOOR LOCK ASSEMBLY

a.

w/o Power Back Door:

i.

Install the back door lock assembly with the 3 bolts.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


ii.

Connect the connector.



b.

w/ Power Back Door:

i.

Install the back door lock assembly with the 4 bolts.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


ii.

Connect the 2 connectors.



Hide 69321 2.INSTALL BACK DOOR LOCK COVER

a.

Attach the 4 claws to install the back door lock cover.


Hide 74623 3.INSTALL REAR ASSIST GRIP REINFORCEMENT (for Face to Face Seat Type)

Hide 67935B 4.INSTALL BACK DOOR GARNISH

Hide 84901 5.INSTALL DOOR OPENING SWITCH SUB-ASSEMBLY (for Face to Face Seat Type)

Hide 67848C 6.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER (for Face to Face Seat Type)

Hide 74611B 7.INSTALL ASSIST GRIP (for Face to Face Seat Type)

Hide 67937B 8.INSTALL BACK DOOR SIDE GARNISH RH

Hide 67938A 9.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67939B 10.INSTALL CENTER BACK DOOR GARNISH