Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM (w/ Entry and Start System) › from 2015.08
RM2660E _58 Vehicle Interior _052839 THEFT DETERRENT / KEYLESS ENTRY _0255573 ENGINE IMMOBILISER SYSTEM(w/ Entry and Start System) T

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM(w/ Entry and Start System)  PROBLEM SYMPTOMS TABLE  


HINT:
·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.

·

If the problem only occurs in certain locations or at certain times of day, check for wave interference.

·

If optional components are installed, check for wave interference from the components.



Engine Immobiliser System
Symptom Suspected Area See page
Security indicator light does not blink Proceed to "Security Indicator Light Does not Blink" (Click here)
Engine immobiliser system does not operate properly Proceed to "Immobiliser System does not Operate Properly" (Click here)
Engine cannot be started*1 Certification ECU (Smart key ECU assembly) (Click here)
ECM (Click here)
SFI System*3 (Click here)
ECD System*4 (Click here)
Power source mode cannot be changed*1 Engine switch (Click here)
Certification ECU (Smart key ECU assembly) -
Steering lock lock/unlock not possible*2 Steering lock ECU (Steering lock actuator assembly) (Click here)

*1: Refer to Problem Symptoms Table for Entry and Start system (for Start Function) (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM(for Start Function)>PROBLEM SYMPTOMS TABLE).

*2: Refer to Problem Symptoms Table for Steering Lock System (See page Steering>STEERING COLUMN>STEERING LOCK SYSTEM>PROBLEM SYMPTOMS TABLE).

*3: for Gasoline

*4: for Diesel