Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052840 LIGHTING (INT) _0255588 IGNITION KEY CYLINDER LIGHT A

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 89783 3.REMOVE TRANSPONDER KEY AMPLIFIER

a.
E234230

Turn the key amplifier as shown in the illustration to detach the 2 claws and remove the key amplifier. Using a screwdriver, widen the claw attached to the upper bracket by approximately 1.0 mm (0.039 in.).


b.

Pull out the transponder key amplifier with the claw open.


c.

Disconnect the connector and remove the transponder key amplifier.