Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2015.08
RM2660E _58 Vehicle Interior _052841 METER / GAUGE / DISPLAY _0255598 METER / GAUGE SYSTEM J

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  Tachometer Malfunction  


DESCRIPTION

The combination meter receives engine speed signals from the ECM via the CAN line. The combination meter displays engine speed data that is calculated based on the data received from the ECM.

WIRING DIAGRAM

E349719E01
1.635,3.083 2.094,3.281 0.458,0.198 10 false ECM 3.281,2.073 4.094,2.302 0.813,0.229 10 false CAN Line 4.438,3.094 6.531,3.344 2.094,0.25 10 false Combination Meter Assembly

PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Check for DTCs (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
CAN communication system DTC is not output A
CAN communication system (for LHD with Central Gateway ECU) DTC is output B
CAN communication system (for LHD without Central Gateway ECU) DTC is output C
CAN communication system (for RHD with Central Gateway ECU) DTC is output D
CAN communication system (for RHD without Central Gateway ECU) DTC is output E



A

2.PERFORM ACTIVE TEST USING GTS (TACHOMETER)

B

C

D

E

2.PERFORM ACTIVE TEST USING GTS (TACHOMETER)
a.

Operate the GTS according to the display and select Active Test (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST).

Combination Meter
Tester Display Test Part Control Range Diagnostic Note
TachoMeter Operation Tachometer 0, 1000, 2000, 3000, 4000, 5000, 6000, 7000 Perform the test with the vehicle stopped and engine idling.

HINT:

Make sure that the vehicle is stopped and the engine is idling.


OK:

Needle indication is normal.




OK

3.READ VALUE USING GTS (TACHOMETER)

NG

REPLACE COMBINATION METER ASSEMBLY

3.READ VALUE USING GTS (TACHOMETER)
a.

Operate the GTS according to the display and select Data List (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST).

Combination Meter
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Engine Rpm Engine speed/Min.: 0, Max.: 12750 Idling: 700 to 800 Unit: rpm

OK:

Engine speed displayed on the GTS is almost the same as actual engine speed.


Result
Result Proceed to
NG A
OK B



A

4.READ VALUE USING GTS (ENGINE SPEED)

B

REPLACE COMBINATION METER ASSEMBLY

4.READ VALUE USING GTS (ENGINE SPEED)
a.

Operate the GTS according to the display and select Data List (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST).

Result
Result Proceed to
Engine speed displayed on the GTS is almost same as actual engine speed A
Engine speed displayed on the GTS is not same as actual engine speed (for 1GR-FE) B
Engine speed displayed on the GTS is not same as actual engine speed (for 1UR-FE) C
Engine speed displayed on the GTS is not same as actual engine speed (for 3UR-FE) D
Engine speed displayed on the GTS is not same as actual engine speed (for 1VD-FTV) E

OK:

Engine speed displayed on the GTS is almost the same as actual engine speed.




A

REPLACE COMBINATION METER ASSEMBLY

B

C

D

E