Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052843 SUPPLEMENTAL RESTRAINT SYSTEMS _0255601 AIRBAG SYSTEM C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  B1815/54  Short in Front Passenger Side Squib 2nd Step Circuit  B1816/54  Open in Front Passenger Side Squib 2nd Step Circuit  B1817/54  Short to GND in Front Passenger Side Squib 2nd Step Circuit  B1818/54  Short to B+ in Front Passenger Side Squib 2nd Step Circuit  


DESCRIPTION

The front passenger side squib 2nd step circuit consists of the center airbag sensor and the front passenger airbag.

The circuit instructs the SRS to deploy when deployment conditions are met.

These DTCs are stored when a malfunction is detected in the front passenger side squib 2nd step circuit.

DTC Code DTC Detection Condition Trouble Area
B1815/54 When one of the following conditions is met:
·

The center airbag sensor receives a line short circuit signal 5 times in the front passenger side squib 2nd step circuit during the primary check.

·

A front passenger side squib 2nd step malfunction.

·

A center airbag sensor malfunction.


·

Instrument panel wire

·

Instrument panel wire assembly

·

Front passenger airbag assembly (Front passenger side squib 2nd step)

·

Center airbag sensor assembly


B1816/54 When one of the following conditions is met:
·

The center airbag sensor receives an open circuit signal in the front passenger side squib 2nd step circuit for 2 seconds.

·

A front passenger side squib 2nd step malfunction.

·

A center airbag sensor malfunction.


·

Instrument panel wire

·

Instrument panel wire assembly

·

Front passenger airbag assembly (Front passenger side squib 2nd step)

·

Center airbag sensor assembly


B1817/54 When one of the following conditions is met:
·

The center airbag sensor receives a short circuit to ground signal in the front passenger side squib 2nd step circuit for 0.5 seconds.

·

A front passenger side squib 2nd step malfunction.

·

A center airbag sensor malfunction.


·

Instrument panel wire

·

Instrument panel wire assembly

·

Front passenger airbag assembly (Front passenger side squib 2nd step)

·

Center airbag sensor assembly


B1818/54 When one of the following conditions is met:
·

The center airbag sensor receives a short circuit to B+ signal in the front passenger side squib 2nd step circuit for 0.5 seconds.

·

A front passenger side squib 2nd step malfunction.

·

A center airbag sensor malfunction.


·

Instrument panel wire

·

Instrument panel wire assembly

·

Front passenger airbag assembly (Front passenger side squib 2nd step)

·

Center airbag sensor assembly



WIRING DIAGRAM

C358163E02
0.333,3.292 0.646,3.49 0.313,0.198 10 false b4 0.344,3.479 2.729,3.729 2.385,0.25 10 false Front Passenger Side Squib 2nd Step 1.271,1.063 1.583,1.26 0.313,0.198 10 false P2+ 1.625,1.083 1.938,1.281 0.313,0.198 10 false 1 1.292,2.271 1.604,2.469 0.313,0.198 10 false P2- 1.635,2.271 1.948,2.469 0.313,0.198 10 false 2 3.385,0.979 3.698,1.177 0.313,0.198 10 false 1 3.354,2.198 3.667,2.396 0.313,0.198 10 false 2 3.281,1.177 3.594,1.375 0.313,0.198 10 false Eb1 3.292,2.385 3.604,2.583 0.313,0.198 10 false Eb1 5.646,1.073 5.958,1.271 0.313,0.198 10 false 1 5.635,2.271 5.948,2.469 0.313,0.198 10 false 2 5.719,3.302 6.031,3.5 0.313,0.198 10 false E47 5.719,3.458 7.135,3.656 1.417,0.198 10 false Center Airbag Sensor 5.854,1.167 6.167,1.365 0.313,0.198 10 false P2+ 5.865,2.396 6.177,2.594 0.313,0.198 10 false P2-

CAUTION / NOTICE / HINT

NOTICE:
·

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).

·

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).



HINT:

To perform the simulation method, enter the check mode (signal check) with the intelligent tester (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>CHECK MODE PROCEDURE), and then wiggle each connector of the airbag system or drive the vehicle on various type of road (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSIS SYSTEM).


PROCEDURE

1.CHECK FRONT PASSENGER AIRBAG (FRONT PASSENGER SIDE SQUIB 2ND STEP)
a.

Turn the ignition switch off.

U164750E01
2.175,2.59 2.311,2.747 0.135,0.157 10 C 2.076,2.59 2.211,2.747 0.135,0.157 10 D 1.758,2.59 1.893,2.747 0.135,0.157 10 E 1.581,2.59 1.717,2.747 0.135,0.157 10 F 2.251,3.12 3.668,3.275 1.417,0.155 10 Center Airbag Sensor 0.492,3.025 1.912,3.346 1.420,0.321 10 Front Passenger Side Squib 2nd Step 0.048,1.667 1.363,1.934 1.316,0.267 12 w/o Side Airbag: 2.175,1.154 2.311,1.311 0.135,0.157 10 C 2.076,1.154 2.211,1.311 0.135,0.157 10 D 1.758,1.154 1.893,1.311 0.135,0.157 10 E 1.581,1.154 1.717,1.311 0.135,0.157 10 F 2.251,1.446 3.668,1.600 1.417,0.155 10 Center Airbag Sensor 1.417,0.303 3.829,0.458 2.412,0.156 10 Front Passenger Side Squib 2nd Step 1.495,0.975 1.297,0.361 1.297,0.361 1.381,0.361 false 0.048,0.033 1.278,0.300 1.230,0.267 12 w/ Side Airbag: 4.202,0.838 6.755,1.189 2.553,0.350 10 Front view of wire harness connector: (to Front Passenger Side Squib 2nd Step) 5.904,1.673 6.735,1.877 0.831,0.204 10 Connector E 6.032,2.062 6.510,2.255 0.477,0.194 10 SST 4.579,2.833 5.473,2.995 0.894,0.162 10 Color: Black 4.513,1.795 4.702,1.935 0.189,0.140 10 b4 5.764,2.018 6.011,2.12 false 5.242,2.389 5.031,2.807 false 1.442,2.527 1.148,2.878 1.148,2.878 1.148,3.025 false


b.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


c.

Disconnect the connectors from the front passenger airbag.


d.

Connect the white wire side of SST (resistance: 2.1 Ω) to connector E (black connector).

CAUTION:

Never connect the tester to the front passenger airbag (front passenger side squib 2nd step) for measurement, as this may lead to a serious injury due to airbag deployment.


NOTICE:
·

Do not forcibly insert SST into the terminals of the connector when connecting SST.

·

Insert SST straight into the terminals of the connector.




SST
09843-18061  

e.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.


f.

Turn the ignition switch to ON, and wait for at least 60 seconds.



h.

Turn the ignition switch off.


i.

Turn the ignition switch to ON, and wait for at least 60 seconds.


j.

Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).

OK:

DTC B1815, B1816, B1817 or B1818 is not output.


HINT:

Codes other than DTC B1815, B1816, B1817 and B1818 may be output at this time, but they are not related to this check.




OK

NG

2.CHECK CONNECTOR
2.CHECK CONNECTOR
a.

Turn the ignition switch off.


b.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


c.

Disconnect SST from connector E.


d.

Check that the instrument panel wire connectors (on the front passenger airbag side) are not damaged.

OK:

The lock button is not disengaged, and the claw of the lock is not damaged or deformed.




OK

3.CHECK FRONT PASSENGER SIDE SQUIB 2ND STEP CIRCUIT

NG

REPLACE INSTRUMENT PANEL WIRE ASSEMBLY

3.CHECK FRONT PASSENGER SIDE SQUIB 2ND STEP CIRCUIT
a.

Disconnect the connectors from the center airbag sensor.

U164752E02
1.281,0.99 1.281,0.396 1.281,0.396 1.365,0.396 false 5.198,2.406 4.99,2.833 false 5.427,1.76 5.896,2.229 false 5.333,1.771 4.865,2.24 false 1.26,2.521 1.26,2.906 false 2.292,2.438 2.333,2.396 false 2.271,2.552 2.365,2.458 false 2.271,2.5 2.365,2.406 false 2.302,2.573 2.344,2.531 false 2.292,0.99 2.333,0.948 false 2.281,1.042 2.365,0.958 false 2.281,1.083 2.365,1 false 2.281,1.125 2.365,1.042 false 2.302,1.146 2.344,1.104 false 1.969,2.594 2.104,2.75 0.135,0.156 10 false C 1.854,2.594 1.99,2.75 0.135,0.156 10 false D 1.552,2.594 1.688,2.75 0.135,0.156 10 false E 1.375,2.594 1.51,2.75 0.135,0.156 10 false F 2.271,3.156 3.656,3.406 1.385,0.25 10 false Center Airbag Sensor 0.604,2.917 2,3.365 1.396,0.448 10 false Front Passenger Side Squib 2nd Step 0.073,1.667 1.385,1.938 1.313,0.271 12 false w/o Side Airbag: 2.635,2.385 2.771,2.542 0.135,0.156 10 false A 2.281,2.583 2.417,2.74 0.135,0.156 10 false B 2.646,0.948 2.781,1.104 0.135,0.156 10 false A 2.281,1.156 2.417,1.313 0.135,0.156 10 false B 1.969,1.167 2.104,1.323 0.135,0.156 10 false C 1.865,1.167 2,1.323 0.135,0.156 10 false D 1.542,1.167 1.677,1.323 0.135,0.156 10 false E 1.375,1.167 1.51,1.323 0.135,0.156 10 false F 2.281,1.479 3.698,1.708 1.417,0.229 10 false Center Airbag Sensor 1.427,0.313 3.813,0.51 2.385,0.198 10 false Front Passenger Side Squib 2nd Step 0.063,0.073 1.292,0.344 1.229,0.271 12 false w/ Side Airbag: 4.281,0.667 6.833,1.021 2.552,0.354 10 false Front view of wire harness connector: (to Front Passenger Side Squib 2nd Step) 5.646,1.656 6.479,1.865 0.833,0.208 10 false Connector E 4.573,2.885 5.469,3.052 0.896,0.167 10 false Color: Black 4.708,1.656 4.938,1.833 0.229,0.177 10 false b4 4.76,2.271 5.042,2.458 0.281,0.188 10 false P2+ 5.906,2.271 6.177,2.458 0.271,0.188 10 false P2-


b.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.


c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
b4-1 (P2+) - Body ground Ignition switch ON Below 1 V
b4-2 (P2-) - Body ground Ignition switch ON Below 1 V



d.

Turn the ignition switch off.


e.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


f.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
b4-1 (P2+) - b4-2 (P2-) Always Below 1 Ω



g.

Release the activation prevention mechanism built into connector B (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSIS SYSTEM).


h.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
b4-1 (P2+) - b4-2 (P2-) Always 1 MΩ or higher
b4-1 (P2+) - Body ground Always 1 MΩ or higher
b4-2 (P2-) - Body ground Always 1 MΩ or higher




OK

4.CHECK CENTER AIRBAG SENSOR

NG

5.CHECK INSTRUMENT PANEL WIRE (CENTER AIRBAG SENSOR - INSTRUMENT PANEL WIRE ASSEMBLY)
4.CHECK CENTER AIRBAG SENSOR
a.
U164753E02
0.698,3.083 0.698,3.646 false 1.427,3.177 1.563,3.333 0.135,0.156 10 false C 1.302,3.177 1.438,3.333 0.135,0.156 10 false D 0.906,3.177 1.042,3.333 0.135,0.156 10 false E 0.792,3.188 0.927,3.344 0.135,0.156 10 false F 1.896,3.833 2.854,4.188 0.958,0.354 10 false Center Airbag Sensor 0.052,2.063 1.365,2.333 1.313,0.271 12 false w/o Side Airbag: 1.417,1.417 1.552,1.573 0.135,0.156 10 false C 1.302,1.417 1.438,1.573 0.135,0.156 10 false D 0.906,1.417 1.042,1.573 0.135,0.156 10 false E 0.792,1.417 0.927,1.573 0.135,0.156 10 false F 1.646,1.781 3.083,2.01 1.438,0.229 10 false Center Airbag Sensor 0.042,3.656 1.417,4 1.375,0.344 10 false Front Passenger Side Squib 2nd Step 0.469,0.417 2.854,0.573 2.385,0.156 10 false Front Passenger Side Squib 2nd Step 0.052,0.052 1.281,0.323 1.229,0.271 12 false w/ Side Airbag:

Connect the connectors to the front passenger airbag and the center airbag sensor.


b.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.


c.

Turn the ignition switch to ON, and wait for at least 60 seconds.



e.

Turn the ignition switch off.


f.

Turn the ignition switch to ON, and wait for at least 60 seconds.


g.

Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).

OK:

DTC B1815, B1816, B1817 or B1818 is not output.


HINT:

Codes other than DTC B1815, B1816, B1817 and B1818 may be output at this time, but they are not related to this check.




OK

NG

5.CHECK INSTRUMENT PANEL WIRE (CENTER AIRBAG SENSOR - INSTRUMENT PANEL WIRE ASSEMBLY)
a.

Restore the released activation prevention mechanism of connector B to its original condition.

U164755E02
1.656,2.396 1.656,2.083 1.656,2.083 1.729,2.083 false 1.188,2.531 1.188,2.781 false 2.167,0.979 2.167,0.396 2.167,0.396 2.25,0.396 false 1.656,0.979 1.656,0.094 1.656,0.094 1.729,0.094 false 1.188,1.104 1.188,1.333 false 2.167,2.542 2.167,3.531 2.167,3.531 2.073,3.531 false 2.281,2.385 2.323,2.344 false 2.281,2.438 2.375,2.344 false 2.281,2.49 2.375,2.396 false 2.281,2.542 2.375,2.448 false 2.333,2.542 2.375,2.5 false 2.281,0.927 2.323,0.896 false 2.281,0.979 2.375,0.896 false 2.281,1.042 2.375,0.948 false 2.281,1.094 2.375,1 false 2.333,1.094 2.375,1.052 false 0.063,0.094 1.385,0.323 1.323,0.229 12 false w/ Side Airbag: 0.042,2.01 1.365,2.24 1.323,0.229 12 false w/o Side Airbag: 0.438,2.76 1.885,3.104 1.448,0.344 10 false Front Passenger Side Squib 2nd Step 1.771,2.01 3.917,2.198 2.146,0.188 10 false Instrument Panel Wire Assembly 0.635,3.396 2.073,3.583 1.438,0.188 10 false Instrument Panel Wire 2.51,3.104 3.448,3.427 0.938,0.323 10 false Center Airbag Sensor 2.625,2.396 2.771,2.552 0.146,0.156 10 false A 2.281,2.615 2.427,2.771 0.146,0.156 10 false B 1.958,2.615 2.104,2.771 0.146,0.156 10 false C 1.771,2.615 1.917,2.771 0.146,0.156 10 false D 1.448,2.615 1.594,2.771 0.146,0.156 10 false E 1.26,2.615 1.406,2.771 0.146,0.156 10 false F 0.5,1.375 1.917,1.74 1.417,0.365 10 false Front Passenger Side Squib 2nd Step 1.771,0.021 3.917,0.208 2.146,0.188 10 false Instrument Panel Wire Assembly 2.271,0.313 3.708,0.5 1.438,0.188 10 false Instrument Panel Wire 2.313,1.469 3.708,1.646 1.396,0.177 10 false Center Airbag Sensor 2.625,0.969 2.771,1.125 0.146,0.156 10 false A 2.281,1.156 2.427,1.313 0.146,0.156 10 false B 1.958,1.156 2.104,1.313 0.146,0.156 10 false C 1.781,1.156 1.927,1.313 0.146,0.156 10 false D 1.458,1.156 1.604,1.313 0.146,0.156 10 false E 1.281,1.167 1.427,1.323 0.146,0.156 10 false F 4.26,0.75 6.615,1.292 2.354,0.542 10 false Front view of wire harness connector: (to Instrument Panel Wire Assembly) 4.344,1.854 4.635,2.063 0.292,0.208 10 false Eb1 6.115,1.844 6.969,2 0.854,0.156 10 false Connector C


b.

Disconnect the instrument panel wire connector from the instrument panel wire assembly.


c.

Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.


d.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
Eb1-1 - Body ground Ignition switch ON Below 1 V
Eb1-2 - Body ground Ignition switch ON Below 1 V



e.

Turn the ignition switch off.


f.

Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.


g.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
Eb1-1 - Eb1-2 Always Below 1 Ω



h.

Release the activation prevention mechanism built into connector B (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSIS SYSTEM).


i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
Eb1-1 - Eb1-2 Always 1 MΩ or higher
Eb1-1 - Body ground Always 1 MΩ or higher
Eb1-2 - Body ground Always 1 MΩ or higher




OK

REPLACE INSTRUMENT PANEL WIRE ASSEMBLY

NG

REPLACE INSTRUMENT PANEL WIRE