Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
1.REMOVE ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)
Remove the roof headlining (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/ Sliding Roof)>REMOVAL).
2.REMOVE ROOF HEADLINING ASSEMBLY (w/o Sliding Roof)
Remove the roof headlining (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (w/o Sliding Roof)>REMOVAL).
3.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY (w/ Rear No. 2 Seat)
Disconnect the connector.
When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 13 bolts and curtain shield airbag.
4.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY (w/o Rear No. 2 Seat)
Disconnect the connector.
When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 10 bolts and curtain shield airbag.