Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052843 SUPPLEMENTAL RESTRAINT SYSTEMS _0255608 FRONT PASSENGER AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RHD and LHD.

·

The procedures listed below are the LHD side.



PROCEDURE

Hide 73960A 1.INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

a.
B449550E01
1.792,0.656 1.979,0.354 false 1.698,1.604 1.677,1.313 false 1.396,3.208 1.604,2.708 false 1.271,4.385 1.458,4.083 false 0.146,0.115 0.823,0.396 0.677,0.281 12 false for LHD: 0.167,2.396 0.844,2.677 0.677,0.281 12 false for RHD: 2,0.156 2.729,0.406 0.729,0.25 10 false Hook (A) 1.542,1.615 2.271,1.865 0.729,0.25 10 false Hook (B) 1.667,2.521 2.396,2.771 0.729,0.25 10 false Hook (A) 0.958,4.406 1.688,4.656 0.729,0.25 10 false Hook (B)

Attach the 5 hooks (A).


b.

Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.


c.
B449548E01
0.156,0.094 0.927,0.354 0.771,0.26 12 false for LHD: 0.229,2.406 1,2.667 0.771,0.26 12 false for RHD:

Install the 2 screws.


d.
B183441

Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



e.

Attach the claw and install the wire.


Hide 55400 2.INSTALL INSTRUMENT PANEL SAFETY PAD

a.

Install the instrument panel safety pad (See page Vehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION).


Hide 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 4. CHECK SRS WARNING LIGHT