Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
1.REMOVE FRONT SEAT ASSEMBLY LH
Remove the front seat assembly LH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>REMOVAL).
72462A
2.REMOVE VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type)
72495
3.REMOVE VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type)
72457
4.REMOVE VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type)
72526A
5.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH
71812D
6.REMOVE FRONT SEAT CUSHION SHIELD LH
73240
7.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH
71862
8.REMOVE FRONT INNER SEAT CUSHION SHIELD LH
71706
9.REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board)
71931
10.REMOVE FRONT SEAT HEADREST SUPPORT (w/ Active Headrest)
11.REMOVE SEATBACK COVER WITH PAD
73920A
12.REMOVE FRONT SEAT AIRBAG ASSEMBLY LH
Detach the 5 clamps and disconnect the wire harness.
Detach the 2 clamps and disconnect the wire harness.
Remove the 2 nuts and front seat airbag assembly LH.
Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.