Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › REAR FLOOR AIRBAG SENSOR › from 2015.08
RM2660E _58 Vehicle Interior _052843 SUPPLEMENTAL RESTRAINT SYSTEMS _0255615 REAR FLOOR AIRBAG SENSOR A

SUPPLEMENTAL RESTRAINT SYSTEMS  REAR FLOOR AIRBAG SENSOR  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 67918E 4.REMOVE REAR DOOR SCUFF PLATE LH (w/ Sliding Roof)

Hide 67918E 5.REMOVE REAR DOOR SCUFF PLATE LH (w/o Sliding Roof)

Hide 67917C 6.REMOVE REAR DOOR SCUFF PLATE RH (w/ Sliding Roof)

Hide 67917C 7.REMOVE REAR DOOR SCUFF PLATE RH (w/o Sliding Roof)

Hide 8.REMOVE REAR FLOOR AIRBAG SENSOR

a.

Fold back the floor carpet.


b.
B181654

Detach the clip and claw, and remove the cover.


c.
B181655

Remove the bolt and sensor.


d.

Disconnect the connector.