Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › 2015.08–2017.08
RM2660E _58 Vehicle Interior _052844 PRE-CRASH SAFETY _0255621 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  DIAGNOSIS SYSTEM  



FUNCTION OF WARNING INDICATOR AND MESSAGE


a.

If the pre-crash safety system is not functioning properly, the driver is warned by the PCS OFF warning light and multi-information display warning message on the combination meter.

Master Warning Indicator Warning Message Detail DTC PCS OFF warning light
Illuminated Pre-crash Safety Malfunction Visit Your Dealer Pre-crash safety system is malfunctioning Stored Blinks
Not illuminated Pre-crash Safety Unavailable
·

Millimeter wave radar sensor assembly misaligned

·

Millimeter wave radar sensor assembly temperature malfunction

·

Millimeter wave radar sensor assembly low voltage malfunction


Not stored Blinks
Not illuminated Pre-crash Safety Unavailable Clean Sensor Foreign matter attached to millimeter wave radar sensor assembly Not stored Blinks
Not illuminated Forward Camera Systems Unavailable Clean Windshield Foreign matter attached to forward recognition camera or area of windshield in front of forward recognition camera Not stored Blinks
Not illuminated Forward Camera Systems Unavailable Forward recognition camera temporarily malfunctioning
·

Abnormal forward recognition camera voltage

·

Forward recognition camera temperature outside of operational range

·

Other forward recognition camera malfunction


Not stored Blinks
Not illuminated VSC Turned Off Pre-crash Safety Unavailable VSC system is disabled Not stored Illuminates

PCS OFF Warning Light Illumination Status
PCS OFF Warning Light Condition
Blinks ON: 0.5 sec./OFF: 1.5sec. Pre-crash safety system malfunctioning (DTC stored)
ON: 0.5 sec./OFF: 1.5sec. Pre-crash safety system temporarily disabled
Illuminates Pre-crash safety system disabled
VSC system disabled
Not illuminates Other


b.

Initial check

i.

An initial check is performed when the engine switch off for more than 2 seconds and then turned on (IG). The initial check consists of a pre-crash safety system diagnostic check with a duration of approximately 3 seconds.


ii.

If a malfunction is detected during the initial check, the PCS OFF warning light in the combination meter assembly will blink and a warning message indicating the pre-crash safety system is malfunctioning or disabled will be displayed on the multi-information display.



c.

Constant check

i.

The driving support ECU assembly constantly monitors the pre-crash safety system for malfunctions after the engine switch is turned on (IG) and the initial check (approximately 3 seconds) has completed.


ii.

If a malfunction is detected during the constant check, the PCS OFF warning light in the combination meter assembly will blink and a warning message indicating the pre-crash safety system is malfunctioning or disabled will be displayed on the multi-information display.