PRE-CRASH SAFETY
PRE-CRASH SAFETY SYSTEM
- PRECAUTION2014.08–2015.082015.08–2017.08from 2017.08
- PARTS LOCATION2014.08–2015.08from 2015.08
- SYSTEM DIAGRAM2014.08–2015.08from 2015.08
- SYSTEM DESCRIPTION2014.08–2015.082015.08–2017.08from 2017.08
- HOW TO PROCEED WITH TROUBLESHOOTING2014.08–2015.082015.08–2017.08from 2017.08
- OPERATION CHECK from 2015.08
- CUSTOMIZE PARAMETERS from 2015.08
- UTILITY from 2015.08
- PROBLEM SYMPTOMS TABLE2014.08–2015.082015.08–2017.08from 2017.08
- TERMINALS OF ECU2014.08–2015.08from 2015.08
- DIAGNOSIS SYSTEM2014.08–2015.082015.08–2017.08from 2017.08
- DTC CHECK / CLEAR2014.08–2015.08from 2015.08
- FREEZE FRAME DATA from 2015.08
- FAIL-SAFE CHART2014.08–2015.082015.08–2017.08from 2017.08
- DATA LIST / ACTIVE TEST2014.08–2015.08from 2015.08
- DIAGNOSTIC TROUBLE CODE CHART2014.08–2015.08from 2015.08
- VEHICLE CONTROL HISTORY from 2015.08
- B2000, B2005 2014.08–2015.08
- B2001, B2006 2014.08–2015.08
- B2002, B2007 2014.08–2015.08
- B2015, B2016, B2020, B2021, B2025, B2026, B2027, B2030, B2031, B2032, B2035, B2040, B2041, B2043, B2047 2014.08–2015.08
- B2036 · Malfunction in seat belt control ECU · Power source voltage (+B) is not input to the seat belt control ECU. 2014.08–2015.08
- B2055 There is a malfunction in the millimeter wave radar sensor or there is a problem with the initialization. 2014.08–2015.08
- B2056 The engine switch is on (IG) and the beam axis of the millimeter wave radar sensor is determined to be... 2014.08–2015.08
- B2057 The vehicle speed is 5 km/h (3 mph) or more and a malfunction is detected in the yaw rate sensor. 2014.08–2015.08
- B2058 The vehicle speed is 50 km/h (31 mph) or more and a malfunction is detected in the steering angle sensor. 2014.08–2015.08
- B2059 The vehicle speed information from the ECM and the vehicle speed information from the master cylinder... 2014.08–2015.08
- B2060 Malfunction in the brake system is detected. 2014.08–2015.08
- B2070 While the ignition switch is ON, the skid control ECU buzzer circuit malfunction signal is received by the... 2014.08–2015.08
- B2071 Malfunction in the brake system is detected. 2014.08–2015.08
- B2074 Malfunction in the front seat inner belt (buckle switch) circuit. 2014.08–2015.08
- B2075 Malfunction in the front seat inner belt (buckle switch) circuit. 2014.08–2015.08
- C1A01 When the engine switch is on (IG), the driving support ECU assembly detects an internal malfunction for... from 2015.08
- C1A02 Inconsistent vehicle specification information between the main body ECU (multiplex network body ECU) and... from 2015.08
- C1A0A When the engine switch is on (IG), the country specification information from the driving support ECU... from 2015.08
- C1A10 When the engine switch is on (IG), the driving support ECU assembly receives information that there is a... from 2015.08
- C1A11, C1A14 from 2015.08
- C1A46 While the vehicle speed is 5 km/h (3 mph) or more, the driving support ECU assembly receives yaw rate sensor... from 2015.08
- C1A47 While the vehicle speed is 50 km/h (31 mph) or more, the driving support ECU assembly receives a steering... from 2015.08
- C1A4A When the engine switch is on (IG) and the pre-crash alarm control is operating, either of the following... from 2015.08
- C1A4B Either of the following conditions is met: · When the engine switch is on (IG), the IG1 terminal voltage is... from 2015.08
- C1A50 While the engine switch is on (IG), the driving support ECU assembly receives a VSC system malfunction signal... from 2015.08
- C1A63 With the ignition switch ON, the driving support ECU assembly receives an accelerator pedal position sensor... from 2015.08
- C1A64 While the engine switch is on (IG), the driving support ECU assembly receives a VSC system malfunction signal... from 2015.08
- C1AA0 While the engine switch is on (IG), the forward recognition camera detects an internal malfunction for... from 2015.08
- C1AA9 When the pre-crash safety system is operating, the driving support ECU assembly detects that Recognition... from 2015.08
- C1AAE When the engine switch on (IG), the driving support ECU assembly receives a forward recognition with heater... from 2015.08
- U0100, U0122, U0151, U1101 2014.08–2015.08
- U0100, U0125, U0126, U0129, U0235, U023A, U1002, U1104 from 2015.08
- U0235, U1102 2014.08–2015.08
- Pre-crash Safety System Cancel Switch Circuit from 2015.08
- Pre-crash Safety System Circuit from 2015.08
- Power Source Circuit 2014.08–2015.08
PRE-CRASH SAFETY SYSTEM CANCEL SWITCH
SEAT BELT CONTROL ECU(for LHD)
SEAT BELT CONTROL ECU(for RHD)
PRE-CRASH SAFETY SYSTEM WARNING BUZZER