Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2015.08
RM2660E _58 Vehicle Interior _052844 PRE-CRASH SAFETY _0255621 PRE-CRASH SAFETY SYSTEM C

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  C1A63  Other System Malfunction  


DESCRIPTION

The driving support ECU assembly receives accelerator pedal position sensor signals from the ECM to determine if the accelerator pedal is being depressed. If the ECM detects a malfunction in the accelerator pedal position sensor or SFI system or ECD system, the driving support ECU assembly is notified via CAN communication and stores DTC C1A63.

DTC No. DTC Detection Condition Trouble Area
C1A63 With the ignition switch ON, the driving support ECU assembly receives an accelerator pedal position sensor malfunction signal from the ECM for approximately 2 seconds or more.
·

SFI system

·

ECD system



PROCEDURE

1.GO TO SFI SYSTEM OR ECD SYSTEM
HINT:

If DTC C1A63 is output by the pre-crash safety system, perform troubleshooting for the SFI system or ECD system.



Result
Proceed to
NEXT


NEXT

END