Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255630 REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 72507D 1.INSTALL NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY

a.

Install the release handle with the bolt.


Hide 72616A 2.INSTALL REAR SEATBACK LOCK STRIKER COVER LH

a.

Attach the 2 clamps to install the cover.


Hide 72997C 3.INSTALL REAR NO. 2 SEATBACK COVER LH

a.

Attach the 3 claws to install the cover.


Hide 72680A 4.INSTALL REAR SEATBACK LOCK STRIKER ASSEMBLY LH

B181859

a.

Install the lock striker with the 2 nuts.

Torque:
14 N*m (138 kgf*cm, 10 ft.*lbf)


Hide 72695A 5.INSTALL REAR SEAT LOCK CONTROL CABLE

B181858

a.

Attach the 2 clamps to install the lock control cable.


b.

Attach the 2 cable clamps to connect the 2 cables.


Hide 71878A 6.INSTALL REAR INNER SEAT RECLINING COVER RH

B181857

a.

Attach the claw to install the cover.


b.

Install the screw.


Hide 71879A 7.INSTALL REAR INNER SEAT RECLINING COVER LH

a.

Attach the claw to install the cover.


b.

Install the screw.


Hide 79034 8.INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH

B184053E02
2.222,0.061 2.426,0.209 0.204,0.147 10 *1 2.186,0.142 2.083,0.142 false 2.083,0.142 1.844,1.533 false

a.

Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.



Text in Illustration
*1 Hog Ring Pliers


Hide 9.INSTALL SEATBACK COVER WITH PAD

a.
B181851

Using hog ring pliers, install the seatback cover with pad to the seatback frame with a new hog rings.


b.

LH Side:

i.

w/ Rear Center Seat Headrest:

1.
B181850

Attach the 8 claws to install the 4 headrest supports.

2.

Install the rear seat protector.

3.
B184046

Insert the center headrest storage bag.

4.
B181848

Attach the 2 hooks.

5.
B184047

Close the fastener.



ii.

w/o Rear Center Seat Headrest:

1.
B235505

Attach the 4 claws to install the 2 headrest supports.

2.

Install the rear seat protector.

3.
B235503

Attach the hook.




c.

RH Side:

i.
B181854

Attach the 4 claws to install the 2 headrest supports.


ii.

Install the rear seat protector.


iii.
B181853

Attach the hook.



Hide 71984A 10.INSTALL REAR SEAT HEADREST HANDLE

a.

Install the snap ring to the headrest handle.


b.
B184054

Install the headrest handle to the headrest.


Hide 71970 11.INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Folding Headrest)

B190319E02
0.994,1.828 2.249,2.172 1.255,0.344 2.043,1.834 2.199,2.128 0.156,0.295 10 *1 2.215,1.921 2.356,1.921 false 2.356,1.921 2.998,1.349 false

a.

While releasing the lock inside the headrest support with a screwdriver, install the headrest.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Protective Tape


Hide 71970 12.INSTALL REAR SEAT HEADREST ASSEMBLY (w/o Folding Headrest)

Hide 72779A 13.INSTALL REAR SEAT HINGE PAWL GUIDE

B181846

a.

Install the guide with the screw.


Hide 72779 14.INSTALL REAR SEAT HINGE PAWL GUIDE

B181845

a.

Attach the 5 claws to install the guide.


Hide 72668A 15.INSTALL REAR LOWER SEATBACK LOCK BEZEL

B181844

a.

Attach the 3 claws and clip to install the seatback lock bezel.


Hide 79393 16.INSTALL REAR NO. 2 SEATBACK CUSHION

B181843

a.

Install the seatback cushion with the screw.


Hide 78930 17.INSTALL NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY

a.
B235502

Attach the 2 clamps to install the 2 cables.


b.
B181838

Attach the 2 cable clamps to connect the 2 cables.


Hide 79029A 18.INSTALL NO. 2 SEAT STAY SUB-ASSEMBLY

B181839

a.

Install the seat stay with the bolt.


Hide 79032 19.INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH

a.
B263633E01
2.336,0.239 2.543,0.413 0.207,0.174 10 *1 2.296,0.331 2.153,0.331 false 2.153,0.331 1.811,1.535 false 2.273,2.321 2.480,2.496 0.207,0.174 10 *2 2.233,2.413 2.09,2.413 false 2.09,2.413 1.834,3.489 false

w/o Bottle Holder:

i.

Attach the fastening tape to install the seatback cover.


ii.

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.



Text in Illustration
*1 Hog Ring Pliers
*2 Fastening Tape



b.

w/ Bottle Holder:

B449551E01
1.24,1.104 1.583,0.177 1.583,0.177 1.719,0.177 false 4,0.563 4.594,0.615 4.594,0.615 4.292,0.875 true 3.156,0.958 2.719,1.479 true 1.75,0.115 2.021,0.292 0.271,0.177 10 false *1 4.604,0.521 4.875,0.698 0.271,0.177 10 false *2 2.573,1.479 2.844,1.656 0.271,0.177 10 false *2

i.

Attach the 3 fastening tapes to install the seatback cover.


ii.

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.



Text in Illustration
*1 Hog Ring Pliers
*2 Fastening Tape



Hide 79345A 20.INSTALL NO. 3 SEAT CUSHION PAD LH

Hide 21.INSTALL SEAT CUSHION COVER WITH PAD

Hide 66990B 22.INSTALL NO. 2 BOTTLE HOLDER

a.
B235484

Install the No. 2 bottle holder with the 2 screws.


Hide 73949 23.INSTALL CAP

a.
B235506

Attach the 4 claws to install the 2 caps.


Hide 71887C 24.INSTALL REAR SEAT CUSHION CARPET

B181840

a.

Install the seat cushion carpet with new tack pins.


Hide 73580A 25.INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

Hide 73307 26.INSTALL REAR CENTER SEAT INNER BELT LH (w/ Rear Center Seat Headrest)

Hide 73302 27.INSTALL REAR CENTER SEAT INNER BELT RH (w/ Rear Center Seat Headrest)

Hide 72690C 28.INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH

a.
B235501

Attach the cable clamp to connect the cable.


b.
B235509

Attach the claw to install the release lever.


c.

Install the screw.


Hide 72345 29.INSTALL SEAT STAND FRAME CAP

B184049

a.

Attach the 2 claws to install the stand frame cap.


Hide 72666B 30.INSTALL REAR SEAT LOCK COVER LH

B181831

a.

Attach the 2 clamps to install the cover.


b.

Install the 2 screws.


Hide 79367 31.INSTALL NO. 3 SEAT LEG COVER NO. 2

B181830

a.

Attach the 4 claws to install the cover.


b.

Install the 2 screws.


Hide 79382 32.INSTALL NO. 3 SEAT FRONT BRACKET COVER LH

B181829

a.

Attach the 4 claws to install the cover.


Hide 72928 33.INSTALL REAR SEAT CUSHION UNDER COVER LH

a.
B258453

Install the cover with the 7 screws.


b.
B181827

Attach the 16 claws.


Hide 72918 34.INSTALL 3RD SEAT CUSHION LOCK COVER

B181826

a.

Attach the 4 claws to install the 2 covers.


Hide 72906 35.INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH

B181825

a.

Install the seat link with the bolt and nut.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


Hide 79246A 36.INSTALL NO. 2 SEAT LEG COVER NO. 2

B182643

a.

Install the seat leg cover with the screw.


Hide 79384 37.INSTALL REAR NO. 3 SEAT LEG COVER LH

a.
B181823

Install the seat leg cover with the 2 screws.


b.
B184055

Install the spring of the seat stay ball-joint.


c.

Connect the seat stay to the seat frame.


Hide 79957 38.INSTALL REAR SEAT REAR BRACKET COVER REAR

a.

Attach the 2 claws to install the cover.


Hide 71843C 39.INSTALL RECLINING ADJUSTER COVER RH

B181821E02
1.767,0.595 1.878,0.758 0.111,0.163 10 1 1.97,0.789 2.070,0.962 0.100,0.173 10 2 1.626,1.056 1.726,1.218 0.100,0.163 10 3 1.613,1.163 1.42,0.97 false 1.613,1.163 1.432,1.163 false 1.613,1.163 1.433,1.343 false

a.

Attach the 5 claws in the order shown in the illustration to install the cover.


b.

Install the screw.


Hide 71844B 40.INSTALL RECLINING ADJUSTER COVER LH

B181820E02
1.663,0.614 1.769,0.756 0.106,0.142 10 1 1.351,0.937 1.462,1.099 0.111,0.163 10 2 1.747,1.186 1.848,1.359 0.100,0.173 10 3

a.

Attach the 3 claws in the order shown in the illustration to install the cover.


b.

Install the screw.


Hide 72526C 41.INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

B181819

a.

Install the release handle with the screw.


Hide 72329 42.INSTALL SEAT ADJUSTER BOLT COVER

B184050

a.

Attach the 2 claws to install the cover.