Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT INNER BELT ASSEMBLY
RM2660E _58 Vehicle Interior _052846 SEAT BELT _0255656 REAR NO. 2 SEAT INNER BELT ASSEMBLY A

SEAT BELT  REAR NO. 2 SEAT INNER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73580A 1.INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

a.

Install the 2 belts.

B184524E01
1.552,0.833 1.552,0.51 1.552,0.51 3.094,0.51 false 2.198,1.333 2.292,1.333 2.292,1.333 2.292,0.51 false 1.5,1.063 0.698,1.938 0.698,1.938 1.99,1.427 false 5.729,0.833 5.729,0.51 5.729,0.51 4.219,0.51 false 5.042,1.333 4.958,1.333 4.958,1.333 4.958,0.51 false 5.75,1.052 6.552,1.927 6.552,1.927 5.25,1.417 false 0.24,0.063 1.146,0.26 0.906,0.198 12 false for LH Side: 4.208,0.063 5.302,0.26 1.094,0.198 12 false for RH Side: 3.198,0.417 4.313,0.708 1.115,0.292 10 false Protruding Part 0.354,1.885 0.802,2.073 0.448,0.188 10 false Claw 6.615,1.875 7.021,2.063 0.406,0.188 10 false Claw

NOTICE:
·

Make sure the claws are facing away from the seat.

·

Do not overlap the anchor part of the seat belt and protruding parts of the seat.




Hide 73307 2.INSTALL REAR SEAT INNER BELT SUB-ASSEMBLY (for LH Side)

U155763E01
1.427,0.333 1.427,0.135 false 1.385,0.615 1.021,1.5 1.021,1.5 1.948,1.146 false 0.271,0.052 1.292,0.344 1.021,0.292 10 true Protruding Part 0.729,1.51 1.24,1.906 0.51,0.396 10 true Claw

a.

Install the belt with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not overlap the anchor part of the seat belt and protruding parts of the seat.


HINT:

The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, connect it when installing the rear seat inner belt.



Hide 73302 3.INSTALL REAR SEAT OUTER BELT SUB-ASSEMBLY (for RH Side)

U155765E01
2.01,0.365 2.01,0.146 false 1.583,1.063 2.573,1.552 2.573,1.552 2.125,0.667 true 2.24,0.063 3.323,0.458 1.083,0.396 10 true Protruding Part 2.615,1.521 3.073,1.854 0.458,0.333 10 true Claw

a.

Install the belt with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not overlap the anchor part of the seat belt and protruding parts of the seat.


HINT:

The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, connect it when installing the rear seat outer belt.



Hide 72526C 13.INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

Hide 15.INSTALL REAR NO. 2 SEAT ASSEMBLY (for LH Side)