Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255645 LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat) A

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 71200S 1.REMOVE FRONT SEAT ASSEMBLY LH

a.

Remove the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>REMOVAL).


Hide 72462A 2.REMOVE VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type)

Hide 72495 3.REMOVE VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type)

Hide 72457 4.REMOVE VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type)

Hide 72526A 5.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

Hide 73240 7.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

Hide 71862 8.REMOVE FRONT INNER SEAT CUSHION SHIELD LH

Hide 71706 9.REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board)

Hide 71931 10.REMOVE FRONT SEAT HEADREST SUPPORT (w/ Active Headrest)

Hide 72760D 12.REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Lumbar Support)

a.
B293541E02
2.219,1.573 1.833,1.573 1.833,1.573 1.833,1.219 true 2.25,1.469 3.281,1.906 1.031,0.438 10 true Cable Clamp

Remove the 4 springs.


b.

Remove the cable clamp and disconnect the active headrest cable from the seatback spring.


c.

Detach the 4 hooks and remove the seatback spring.


d.
B180724

Disconnect the lumbar support adjuster connector.


e.

Remove the 2 screws and lumbar support adjuster.