Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for Bench Seat Type)
RM2660E _58 Vehicle Interior _052845 SEAT _0255648 REAR NO. 1 SEAT ASSEMBLY(for Bench Seat Type) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for Bench Seat Type)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71386A 1.INSTALL REAR SEAT CUSHION HOLDER BRACKET

HINT:

Use the same procedure to install the rear seat cushion holder bracket on the other side.


a.

Install the rear seat cushion holder bracket with the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 72607 2.INSTALL REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY

HINT:

Use the same procedure to install the rear seat cushion lock striker sub-assembly on the other side.


a.

Install the rear seat cushion lock striker with the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


b.
B292807

Return the rear floor silencer to its original position.


c.
B292805

Return the front floor carpet to its original position and attach the fastener.


Hide 71696 3.INSTALL REAR SEAT NO. 2 PROTECTOR

HINT:

Use the same procedure to install the rear seat No. 2 protector on the other side.


a.

Attach the 4 claws to install the rear seat No. 2 protector to the rear seat cushion lock striker sub-assembly.


Hide 7.INSTALL REAR NO. 1 SEAT ASSEMBLY

a.

Place the rear No. 1 seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Temporarily install the rear No. 1 seat assembly with the 4 bolts.


c.
B292800E02
0.219,1.271 0.417,1.448 0.198,0.177 10 false (1) 2.896,1.969 3.146,2.177 0.25,0.208 10 true (2)

Tighten the 2 bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


d.

Return the rear No. 1 seat assembly to its original position.


e.
B292799E02
3.021,1.667 3.229,1.865 0.208,0.198 10 true (1) 2.01,2.24 2.208,2.417 0.198,0.177 10 true (2)

Tighten the 2 bolts in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 71691H 8.INSTALL REAR SEAT NO. 2 CUSHION HINGE COVER

a.

Operate the reclining remote control lever knob and fold down the rear No. 1 seat assembly.


b.

Attach the 3 claws to install the rear seat No. 2 cushion hinge cover.


Hide 71691E 9.INSTALL REAR SEAT NO. 1 CUSHION HINGE COVER

a.

Attach the 3 claws to install the rear seat No. 1 cushion hinge cover.


Hide 71692J 10.INSTALL REAR SEAT NO. 4 CUSHION HINGE COVER

a.

Return the rear No. 1 seat assembly to its original position.


b.

Attach the 6 claws to install the rear seat No. 4 cushion hinge cover.


Hide 71692H 11.INSTALL REAR SEAT NO. 3 CUSHION HINGE COVER

a.

Attach the 6 claws to install the rear seat No. 3 cushion hinge cover.