Home › Vehicle Interior › SEAT › CLIMATE CONTROL SEAT SWITCH › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052845 SEAT _0255649 CLIMATE CONTROL SEAT SWITCH A

SEAT  CLIMATE CONTROL SEAT SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 84751 1.INSTALL SEAT HEATER SWITCH

B181869

a.

Attach the 2 claws to install the seat heater switch.


Hide 89299 2.INSTALL SUSPENSION CONTROL SWITCH

a.
B181868

Attach the 4 claws to install the suspension control switch.


b.
B181867

Connect the 2 connectors.


c.

Attach the wire harness clamp.


Hide 58805C 5.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 55406B 6.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 55402C 8.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

Hide 55448A 9.INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

Hide 55403C 10.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

Hide 55449C 11.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 12.INSPECT SEAT HEATER SYSTEM

a.

Check the seat heater operation.

i.

Turn the engine switch on (IG).


ii.

Turn the seat heater switch on.


iii.

Wait 5 minutes or more and confirm that the seat surface becomes warm.



Hide 13.INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

a.

Check the climate control seat operation.

i.

When the climate control seat switch is turned on, check that the seat heater and blower operate based on the seat temperature.


ii.

If the seat temperature increases as a result of the seat heater operation, check that the seat heater operation stops and the blower operation continues.

HINT:

Based on the cabin temperature, seat temperature, etc., the seat heater operation time varies.