When the ignition switch ON, the center airbag sensor assembly transmits front seat inner belt state signals to the combination meter assembly through the CAN. If the driver seat belt is not fastened, the combination meter assembly blinks the driver side seat belt warning light. If the seat belt is fastened, the warning light goes off.
Check the vehicle type.
| Result | Proceed to |
|---|---|
| for LHD | A |
| for RHD | B |
A
B
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| CAN communication system DTC is output (for LHD with Central Gateway ECU) | B |
| CAN communication system DTC is output (for LHD without Central Gateway ECU) | C |
| Airbag system DTC is output | D |
A
B
C
D
Check the Data List for proper functioning of the driver side seat belt buckle switch.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Driver Buckle SW | Driver side seat belt / Set, Unset or NG | Set: Driver side seat belt is fastened
Unset: Driver side seat belt is unfastened |
NG: Data is not determined |
| Result | Proceed to |
|---|---|
| Set or Unset is displayed on the GTS screen according to the driver side seat belt condition | A |
| Set or Unset is not displayed normally on the GTS screen according to the driver side seat belt condition | B |
| NG is displayed on the GTS screen | C |
A
B
C
Check the driver side seat belt warning light function (See page Vehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM>OPERATION CHECK).
Driver side seat belt warning light operates normally.
OK
NG
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| CAN communication system DTC is output (for RHD with Central Gateway ECU) | B |
| CAN communication system DTC is output (for RHD without Central Gateway ECU) | C |
| Airbag system DTC is output | D |
A
B
C
D
Check the Data List for proper functioning of the driver side seat belt buckle switch.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Driver Buckle SW | Driver side seat belt / Set, Unset or NG | Set: Driver side seat belt is fastened
Unset: Driver side seat belt is unfastened |
NG: Data is not determined |
| Result | Proceed to |
|---|---|
| Set or Unset is displayed on the tester screen according to the driver side seat belt condition | A |
| Set or Unset is not displayed normally on the GTS screen according to the driver side seat belt condition | B |
| NG is displayed on the GTS screen | C |
A
B
C
Check the driver side seat belt warning light function (See page Vehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM>OPERATION CHECK).
Driver side seat belt warning light operates normally.
OK
NG