Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)
Install the front seat belt anchor plate.
Install the front seat inner belt assembly with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.
Connect the connectors and attach the clamps.
73240
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)
Install the front seat belt anchor plate.
Install the front seat inner belt assembly with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.
Connect the connectors and attach the clamps.
3.INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).
4.INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>INSTALLATION).
28800
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
6.CHECK SRS WARNING LIGHT
7.INSPECT FRONT SEAT ASSEMBLY
for Manual Seat:
Inspect Front Seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).
for Power Seat:
Inspect Front Seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>INSTALLATION).