Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE FRONT SEAT ASSEMBLY RH
67914B
2.REMOVE FRONT DOOR SCUFF PLATE LH
51775
3.REMOVE REAR STEP COVER
67918E
4.REMOVE REAR DOOR SCUFF PLATE LH
62422
5.REMOVE CENTER PILLAR GARNISH COVER LH
62414A
6.REMOVE CENTER LOWER PILLAR GARNISH LH
When installing the center lower pillar garnish, move the front seat and seatback to the foremost upright position.
After moving the front seat, disconnect the cable from the negative (-) battery terminal.
Remove the bolt and seat belt anchor.
Detach the 3 claws and 6 clips, and remove the center lower pillar garnish LH.
74620A
7.REMOVE REAR ASSIST GRIP ASSEMBLY
62412
8.REMOVE CENTER PILLAR GARNISH LH
73220
9.REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH
Remove the nut and shoulder anchor.
Remove the bolt and front seat outer belt assembly LH.
73200A
10.REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
Remove the 2 bolts and front shoulder belt anchor adjuster assembly.
73101A
11.REMOVE FRONT SEAT OUTER LAP BELT SUB-ASSEMBLY
Remove the bolt and front seat outer lap belt sub-assembly.