Use the same procedures for the LHD vehicle and RHD vehicle.
The procedures listed below are for the LHD vehicle.
88625Q
1.INSTALL COOLER THERMISTOR (ROOM TEMPERATURE SENSOR)
Connect the hose to install the cooler thermistor (room temperature sensor).
Connect the connector.
55432D
2.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
55606
3.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
55475A
4.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55474C
5.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55403C
6.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55449C
7.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION