The front air mix damper servo motor (for front passenger side) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the front air mix damper (for front passenger side) to any position. As a result, the amount of air that has passed through the evaporator and is passing through the heater core is adjusted, and the temperature of the air blowing toward the front passenger side is controlled.
Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1441/41 | The air mix damper position does not change even if the air conditioning amplifier assembly operates the air mix damper servo motor. | ·
Air mix damper servo motor (for front passenger side) ·
Air conditioning harness assembly ·
Air conditioning amplifier assembly |
Use the Data List to check if the servo motor is functioning properly.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Air Mix Servo Targ Pulse (P) | Air mix damper servo motor (for front passenger side) target pulse /
Min.: 8, Max.: 90 (for LHD) Min.: 8, Max.: 90 (for RHD) |
for LHD
·
MAX COOL: 8 (pulse) ·
MAX HOT: 90 (pulse) for RHD ·
MAX COOL: 90 (pulse) ·
MAX HOT: 8 (pulse) |
- |
The display is as specified in the normal condition.
| Result | Proceed to |
|---|---|
| OK (Checking from the DTC) | A |
| OK (Checking from the PROBLEM SYMPTOMS TABLE) | B |
| NG | C |
A
B
C
Replace the air mix damper servo motor (for front passenger side).
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.
Check for DTCs (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1441/41 is not output | A |
| DTC B1441/41 is output | B |
A
B
Replace the air conditioning harness assembly.
Check for DTCs (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1441/41 is not output | A |
| DTC B1441/41 is output | B |
A
B