Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255699 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B1442/42  Air Inlet Damper Control Servo Motor Circuit  


DESCRIPTION

The damper servo motor (REC/FRS) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the damper servo motor (REC/FRS) to any position, which controls the intake air settings (fresh, fresh/recirculation and recirculation).

HINT:

Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.


DTC Code DTC Detection Condition Trouble Area
B1442/42 The air inlet damper position does not change even if the air conditioning amplifier assembly operates the damper servo motor (REC/FRS).
·

Mode damper servo motor (REC/FRS)

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly



WIRING DIAGRAM

w/ Rear Heater:



E330394E59
4.833,0.479 5.292,0.677 0.458,0.198 10 false BUS 4.833,0.771 5.292,0.969 0.458,0.198 10 false B BUS 4.844,1.094 5.302,1.292 0.458,0.198 10 false BUS G 4.625,0.427 5.083,0.625 0.458,0.198 10 false 2 4.625,0.781 5.083,0.979 0.458,0.198 10 false 3 4.635,1.094 5.094,1.292 0.458,0.198 10 false 1 4.969,1.823 5.333,2.021 0.365,0.198 10 false z72 4.969,2 6.531,2.385 1.563,0.385 10 false Air Conditioning Amplifier Assembly 3.094,1.74 4.646,2.104 1.552,0.365 10 false Air Conditioning Harness Assembly 0.625,1.708 2.729,1.927 2.104,0.219 10 false Damper Servo Motor (REC/FRS) 0.74,2.417 2.594,2.625 1.854,0.208 10 false : LIN Communication Line

w/o Rear Heater:



E330394E60
4.833,0.479 5.292,0.677 0.458,0.198 10 false BUS 4.833,0.771 5.292,0.969 0.458,0.198 10 false B BUS 4.844,1.094 5.302,1.292 0.458,0.198 10 false BUS G 4.625,0.427 4.802,0.646 0.177,0.219 10 false 3 4.625,0.781 4.802,0.979 0.177,0.198 10 false 4 4.625,1.094 5.083,1.292 0.458,0.198 10 false 2 4.979,1.823 5.438,2.021 0.458,0.198 10 false z71 4.969,1.99 6.531,2.365 1.563,0.375 10 false Air Conditioning Amplifier Assembly 3.146,1.729 4.688,2.115 1.542,0.385 10 false Air Conditioning Harness Assembly 0.719,1.708 2.854,1.927 2.135,0.219 10 false Damper Servo Motor (REC/FRS) 0.74,2.417 2.5,2.625 1.76,0.208 10 false : LIN Communication Line

PROCEDURE

1.READ VALUE USING GTS (AIR INLET DAMPER TARG PULSE, AIR INLETDAMPER ACTUAL PULSE)
a.

Use the Data List to check if the damper servo motor (REC/FRS) is functioning properly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Air Inlet Damper Targ Pulse Mode damper servo motor (REC/FRS) target pulse / Min.: 128, Max.:383
for LHD:
·

RECIRCULATION: 286 (pulse)

·

FRESH: 258 (pulse)


for RHD:
·

RECIRCULATION: 258 (pulse)

·

FRESH: 286 (pulse)


·

Displayed between 258 and 286 pulse

·

Mode damper servo motor (REC/FRS) system malfunction


Air Inlet Damper Actual Pulse Mode damper servo motor (REC/FRS) actual pulse / Min.: 128, Max.:383
for LHD:
·

RECIRCULATION: 286 (pulse)

·

FRESH: 258 (pulse)


for RHD:
·

RECIRCULATION: 258 (pulse)

·

FRESH: 286 (pulse)


·

Displayed between 258 and 286 pulse

·

Mode damper servo motor (REC/FRS) system malfunction



OK:

When the mode switch is turned, the actual pulse changes following the target pulse.


Result
Result Proceed to
Target pulse changes but actual pulse does not change A
Target pulse and actual pulse do not change B
Actual pulse changes following the target pulse (When troubleshooting according to the DTC) C
Actual pulse changes following the target pulse (When troubleshooting according to Problem Symptoms Table) E



A

2.CHECK DAMPER SERVO MOTOR (REC/FRS)

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

C

4.CHECK FOR DTC

D

2.CHECK DAMPER SERVO MOTOR (REC/FRS)
a.

Replace the damper servo motor (REC/FRS).


HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.






OK

END (DAMPER SERVO MOTOR [REC/FRS] WAS DEFECTIVE)

B

3.CHECK AIR CONDITIONING HARNESS ASSEMBLY
3.CHECK AIR CONDITIONING HARNESS ASSEMBLY

OK

END (AIR CONDITIONING HARNESS ASSEMBLY WAS DEFECTIVE)

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY