Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255699 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) J

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  Air Conditioning Control Panel does not Operate  


DESCRIPTION

This circuit* consists of the air conditioning control assembly and the air conditioning amplifier assembly. When the air conditioning control assembly is operated, signals are transmitted to the air conditioning amplifier assembly through the LIN communication system.

If the LIN communication system malfunctions, the air conditioning amplifier assembly does not operate even if the air conditioning control assembly is operated.

HINT:

*: w/o Multi-display


WIRING DIAGRAM

E157369E08
5.564,0.845 5.874,1.026 0.310,0.181 10 LIN1 1.389,0.845 1.741,1.026 0.353,0.181 10 LIN1 1.463,1.364 1.708,1.545 0.245,0.181 10 IG+ 1.407,1.911 1.732,2.092 0.326,0.181 10 GND 3.744,1.376 5.128,1.550 1.383,0.174 10 from IG1 NO. 3 Relay 2.419,1.515 3.335,1.696 0.916,0.181 10 ECU-IG NO. 2 5.525,2.648 6.991,3.054 1.467,0.406 10 Air Conditioning Amplifier Assembly 5.525,2.47 5.853,2.639 0.328,0.169 10 E36 0.671,2.62 2.076,2.953 1.405,0.333 10 Air Conditioning Control Assembly 0.886,3.296 2.501,3.477 1.615,0.181 10 : LIN Communication Line 5.255,0.676 5.426,0.857 0.171,0.181 10 20 1.833,0.667 1.989,0.848 0.156,0.181 10 5 1.833,1.277 1.989,1.459 0.156,0.181 10 7 1.833,1.83 1.989,2.011 0.156,0.181 10 1 0.671,2.446 1.169,2.630 0.498,0.184 10 F10 0.062,0 1.283,0.239 1.221,0.239 12 w/ Rear Heater:

E157369E09
5.564,0.845 5.874,1.026 0.310,0.181 10 LIN1 1.389,0.845 1.741,1.026 0.353,0.181 10 LIN1 1.463,1.364 1.708,1.545 0.245,0.181 10 IG+ 1.407,1.911 1.732,2.092 0.326,0.181 10 GND 3.744,1.376 5.128,1.550 1.383,0.174 10 from IG1 NO. 3 Relay 2.419,1.515 3.335,1.696 0.916,0.181 10 ECU-IG NO. 2 5.485,2.648 6.802,3.018 1.317,0.370 10 Air Conditioning Amplifier Assembly 5.485,2.47 5.813,2.639 0.328,0.169 10 E81 0.671,2.62 2.076,2.953 1.405,0.333 10 Air Conditioning Control Assembly 0.886,3.296 2.501,3.477 1.615,0.181 10 : LIN Communication Line 5.255,0.676 5.426,0.857 0.171,0.181 10 37 1.833,0.667 1.989,0.848 0.156,0.181 10 5 1.833,1.277 1.989,1.459 0.156,0.181 10 7 1.833,1.83 1.989,2.011 0.156,0.181 10 1 0.671,2.446 1.169,2.630 0.498,0.184 10 F10 0.054,0.018 1.415,0.215 1.361,0.198 12 w/o Rear Heater:

PROCEDURE

1.INSPECT FUSE (ECU-IG NO. 2)
a.

Remove the ECU-IG NO. 2 fuse from the engine room relay block.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
ECU-IG NO. 2 fuse Always Below 1 Ω




OK

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING CONTROL - BODY GROUND AND BATTERY)

NG

REPLACE FUSE

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING CONTROL - BODY GROUND AND BATTERY)
U165947E01
0.096,0.273 2.694,0.728 2.597,0.455 10 Front view of wire harness connector: (to Air Conditioning Control Assembly) 0.333,1.889 0.618,2.061 0.285,0.171 10 F10 0.533,2.701 0.932,2.873 0.398,0.171 10 GND 2.279,2.974 2.531,3.146 0.252,0.171 10 IG+ 1.144,2.095 0.789,2.674 false 2.587,2.129 2.425,2.944 false

a.

Disconnect the F10 air conditioning control assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F10-1 (GND) - Body ground Always Below 1 Ω


Standard Voltage:
Tester Connection Switch Condition Specified Condition
F10-1 (GND) - F10-7 (IG+) Engine switch on (IG) 11 to 14 V




OK

3.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - AIR CONDITIONING CONTROL)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - AIR CONDITIONING CONTROL)
a.

w/ Rear Heater

E349823E01
0.479,2.01 0.844,2.26 0.365,0.25 5.167,1.146 5.531,1.396 0.365,0.25 1.865,2.219 2.125,2.917 false 5.813,2.729 6.188,2.927 false 0.177,0.146 2.542,0.563 2.365,0.417 10 false Front view of wire harness connector: (to Air Conditioning Control Assembly) 4.073,0.167 6.51,0.531 2.438,0.365 10 false Rear view of wire harness connector: (to Air Conditioning Amplifier Assembly) 0.542,2.052 1,2.25 0.458,0.198 10 false F10 2.104,2.99 2.479,3.177 0.375,0.188 10 false LIN1 5.229,1.177 5.521,1.354 0.292,0.177 10 true E36 6.24,2.865 6.615,3.052 0.375,0.188 10 false LIN1

i.

Disconnect the F10 air conditioning control assembly connector.


ii.

Disconnect the E36 amplifier connector.


iii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
E36-20 (LIN1) - F10-5 (LIN1) Always Below 1 Ω
E36-20 (LIN1) - Body ground Always 10 kΩ or higher




b.

w/o Rear Heater

E349824E01
0.344,1.563 0.74,1.802 0.396,0.24 5.271,0.927 5.667,1.167 0.396,0.24 1.802,1.802 1.979,2.365 false 5.177,2.104 5.042,2.406 false 0.135,0.083 2.5,0.469 2.365,0.385 10 false Front view of wire harness connector: (to Air Conditioning Control Assembly) 3.885,0.094 6.302,0.469 2.417,0.375 10 false Rear view of wire harness connector: (to Air Conditioning Amplifier Assembly) 0.438,1.594 0.76,1.781 0.323,0.188 10 false F10 1.896,2.406 2.271,2.594 0.375,0.188 10 false LIN1 5.354,0.979 5.646,1.167 0.292,0.188 10 false E81 4.938,2.458 5.313,2.646 0.375,0.188 10 false LIN1

i.

Disconnect the F10 air conditioning control assembly connector.


ii.

Disconnect the E81 amplifier connector.


iii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
E81-37 (LIN1) - F10-5 (LIN1) Always Below 1 Ω
E81-37 (LIN1) - Body ground Always 10 kΩ or higher





OK

4.CHECK AIR CONDITIONING CONTROL ASSEMBLY (OPERATION)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK AIR CONDITIONING CONTROL ASSEMBLY (OPERATION)
a.

Replace the air conditioning control assembly with a new or properly functioning one.


b.

Operate the front air conditioning control to check that it functions properly.

OK:

Air conditioning control assembly function operates normally.




OK

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY