The air outlet damper servo motor (for front passenger side mode) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air outlet damper (for front passenger side mode) to any position, which controls the air outlet changes.
Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1448/48 | The air outlet damper position does not change even if the air conditioning amplifier assembly operates the air outlet damper servo motor. | ·
Air outlet damper servo motor (for front passenger side mode) ·
Air conditioning harness assembly ·
Air conditioning amplifier assembly |
Use the Data List to check if the servo motor is functioning properly.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| A/O Damper FACE Pos(P) | Air outlet damper servo motor (for front passenger side mode) target pulse /
Min.: 6, Max.: 117 (for LHD) Min.: 9, Max.: 120 (for RHD) |
for LHD
·
FACE1: 117 (pulse) ·
FACE2: 109 (pulse) ·
B/L1: 93 (pulse) ·
B/L2: 81 (pulse) ·
FOOT-F: 41 (pulse) ·
FOOT-R: 41 (pulse) ·
FOOT-D: 52 (pulse) ·
F/D: 18 (pulse) ·
DEF: 6 (pulse) for RHD ·
FACE1: 9 (pulse) ·
FACE2: 17 (pulse) ·
B/L1: 33 (pulse) ·
B/L2: 45 (pulse) ·
FOOT-F: 85 (pulse) ·
FOOT-R: 85 (pulse) ·
FOOT-D: 74 (pulse) ·
F/D: 108 (pulse) ·
DEF: 120 (pulse) |
- |
The display is as specified in the normal condition.
| Result | Proceed to |
|---|---|
| OK (Checking from the DTC) | A |
| OK (Checking from the PROBLEM SYMPTOMS TABLE) | B |
| NG | C |
A
B
C
Replace the air outlet damper servo motor (for front passenger side mode).
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.
Check for DTCs (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1448/482 is not output | A |
| DTC B1448/48 is output | B |
A
B
Replace the air conditioning harness assembly.
Check for DTCs (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1448/48 is not output | A |
| DTC B1448/48 is output | B |
A
B