Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255699 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B1445/45  Passenger Side Cool Air Bypass Damper Control  


DESCRIPTION

The cool bypass damper servo motor sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the cool bypass damper servo motor to any position. As a result, when the air conditioner is operating, the temperature of the air blowing toward the head area is controlled.

HINT:

Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.


DTC Code DTC Detection Condition Trouble Area
B1445/45 The cool air bypass damper position does not change even if the air conditioning amplifier assembly operates the cool bypass damper servo motor.
·

Cool bypass damper servo motor

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly



WIRING DIAGRAM

w/ Rear Heater:


E330394E63
4.833,0.479 5.292,0.677 0.458,0.198 10 false BUS 4.833,0.771 5.292,0.969 0.458,0.198 10 false B BUS 4.844,1.094 5.302,1.292 0.458,0.198 10 false BUS G 4.625,0.427 5.083,0.625 0.458,0.198 10 false 2 4.625,0.781 5.083,0.979 0.458,0.198 10 false 3 4.635,1.094 5.094,1.292 0.458,0.198 10 false 1 4.979,1.823 5.438,2.021 0.458,0.198 10 false z72 4.979,2 6.563,2.375 1.583,0.375 10 false Air Conditioning Amplifier Assembly 3.135,1.729 4.667,2.115 1.531,0.385 10 false Air Conditioning Harness Assembly 0.552,1.708 2.771,1.927 2.219,0.219 10 false Cool Bypass Damper Servo Motor 0.74,2.417 2.594,2.625 1.854,0.208 10 false : LIN Communication Line


w/o Rear Heater:


E330394E64
4.833,0.479 5.292,0.677 0.458,0.198 10 false BUS 4.833,0.771 5.292,0.969 0.458,0.198 10 false B BUS 4.844,1.094 5.302,1.292 0.458,0.198 10 false BUS G 4.625,0.427 5.083,0.625 0.458,0.198 10 false 3 4.625,0.781 5.083,0.979 0.458,0.198 10 false 4 4.635,1.094 5.094,1.292 0.458,0.198 10 false 2 4.979,1.823 5.438,2.021 0.458,0.198 10 false z71 4.958,2.021 6.531,2.427 1.573,0.406 10 false Air Conditioning Amplifier Assembly 3.135,1.729 4.677,2.115 1.542,0.385 10 false Air Conditioning Harness Assembly 0.563,1.708 2.698,1.927 2.135,0.219 10 false Cool Bypass Damper Servo Motor 0.74,2.417 2.594,2.625 1.854,0.208 10 false : LIN Communication Line


PROCEDURE

1.READ VALUE USING GTS (COOL AIR BYPASS PULSE, COOL AIR BYPASSACTUAL PULSE)
a.

Use the Data List to check if the cool bypass damper servo motor is functioning properly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Cool Air Bypass Pulse Cool bypass damper servo motor target pulse / Min.: 128, Max.: 383
·

Shut: 225 (pulse)

·

Open: 254 (pulse)


·

Displayed between 258 and 286 pulse

·

Cool bypass damper servo motor system malfunction


Cool Air Bypass Actual Pulse Cool bypass damper servo motor actual pulse / Min.: 128, Max.: 383
·

Shut: 225 (pulse)

·

Open: 254 (pulse)


·

Displayed between 258 and 286 pulse

·

Cool bypass damper servo motor system malfunction



OK:

When the cooler temperature switch is turned, the actual pulse changes following the target pulse.


Result
Result Proceed to
Target pulse changes but actual pulse does not change A
Target pulse and actual pulse do not change B
Actual pulse changes following the target pulse (When troubleshooting according to the DTC) C
Actual pulse changes following the target pulse (When troubleshooting according to Problem Symptoms Table) D



A

2.CHECK COOL BYPASS DAMPER SERVO MOTOR

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

C

4.CHECK FOR DTC

D

2.CHECK COOL BYPASS DAMPER SERVO MOTOR
a.

Replace the cool bypass damper servo motor.


HINT:

Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.






OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

3.CHECK AIR CONDITIONING HARNESS ASSEMBLY
3.CHECK AIR CONDITIONING HARNESS ASSEMBLY

OK

END (AIR CONDITIONING HARNESS ASSEMBLY IS DEFECTIVE)

NG

END (COOL BYPASS DAMPER SERVO MOTOR WAS DEFECTIVE)