Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255703 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  B1412/12  Ambient Temperature Sensor Circuit  


DESCRIPTION

The ambient temperature sensor is installed in the front part of the condenser to detect the ambient temperature and control the air conditioner "auto" mode. The sensor connected to the air conditioning amplifier assembly detects fluctuations in the ambient temperature. This data is used for controlling the room temperature. The sensor sends a signal to the air conditioning amplifier assembly. The resistance of the ambient temperature sensor changes in accordance with the ambient temperature. As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases.

The air conditioning amplifier assembly applies voltage (5 V) to the ambient temperature sensor and reads voltage changes as the resistance of the ambient temperature sensor changes.

DTC Code DTC Detection Condition Trouble Area
B1412/12 An open or short in the ambient temperature sensor circuit.
·

Cooler thermistor (ambient temperature sensor)

·

Harness or connector

·

Air conditioning amplifier assembly



WIRING DIAGRAM

E312530E79
4.583,1.615 5.042,1.813 0.458,0.198 10 false E81 4.573,1.792 6.885,2.042 2.313,0.25 10 false Air Conditioning Amplifier Assembly 4.771,0.531 5.229,0.729 0.458,0.198 10 false TAM 4.781,1.01 5.24,1.208 0.458,0.198 10 false SG-2 4.51,1.021 4.927,1.281 0.417,0.26 10 false 13 4.552,0.542 4.781,0.729 0.229,0.188 10 false 5 2.99,0.552 3.406,0.719 0.417,0.167 10 false 1 3,1.01 3.417,1.177 0.417,0.167 10 false 2 0.521,1.5 1.469,1.698 0.948,0.198 10 false A14*1, A85*2 0.521,1.677 3.635,1.906 3.115,0.229 10 false Cooler Thermistor (Ambient Temperature Sensor) 5.698,0.198 6.031,0.396 0.333,0.198 10 false 5 V 6.146,0.635 6.479,0.833 0.333,0.198 10 false AD

PROCEDURE

1.READ VALUE USING GTS (AMBIENT TEMP SENSOR)
a.

Use the Data List to check if the cooler thermistor (ambient temperature sensor) is functioning properly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Ambient Temp Sensor Ambient temperature sensor / Min: -23.3°C (-9.94°F), Max: 65.95°C (150.71°F) Actual ambient temperature displayed Thermistor assembly (ambient temperature sensor) system malfunction:
·

Open in the circuit: -23.3°C (-9.94°F)

·

Short in the circuit: 65.95°C (150.71°F)



OK:

The display is as specified in the normal condition.


Result
Result Proceed to
OK (When troubleshooting according to the DTC) A
OK (When troubleshooting according to Problem Symptoms Table) B
NG C



A

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

B

C

2.INSPECT COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)
2.INSPECT COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)
a.

Remove the cooler thermistor (ambient temperature sensor) (See page Vehicle Interior>HEATING / AIR CONDITIONING>AMBIENT TEMPERATURE SENSOR>REMOVAL).


b.

Inspect the cooler thermistor (ambient temperature sensor) (See page Vehicle Interior>HEATING / AIR CONDITIONING>AMBIENT TEMPERATURE SENSOR>INSPECTION).



OK

3.CHECK COOLER THERMISTOR [AMBIENT TEMPERATURE SENSOR] - AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPLACE COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)

3.CHECK COOLER THERMISTOR [AMBIENT TEMPERATURE SENSOR] - AIR CONDITIONING AMPLIFIER ASSEMBLY

*1: w/o Door Ajar Warning Buzzer

*2: w/ Door Ajar Warning Buzzer


a.

Disconnect the A14*1 or A85*2 cooler thermistor (ambient temperature sensor) connector.


b.

Disconnect the E81 air conditioning amplifier assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
w/o Door Ajar Warning Buzzer:
Tester Connection Condition Specified Condition
A14-1 - E81-5 (TAM) Always Below 1 Ω
A14-2 - E81-13 (SG-2) Always Below 1 Ω
A14-1 - A14-2 Always 10 kΩ or higher
A14-1 or E81-5 (TAM) - Body ground Always 10 kΩ or higher
A14-2 or E81-13 (SG-2) - Body ground Always 10 kΩ or higher

w/ Door Ajar Warning Buzzer:
Tester Connection Condition Specified Condition
A85-1 - E81-5 (TAM) Always Below 1 Ω
A85-2 - E81-13 (SG-2) Always Below 1 Ω
A85-1 - A85-2 Always 10 kΩ or higher
A85-1 or E81-5 (TAM) - Body ground Always 10 kΩ or higher
A85-2 or E81-13 (SG-2) - Body ground Always 10 kΩ or higher




OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR