Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255703 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  B1412  Ambient Temperature Sensor Circuit  


DESCRIPTION

The cooler thermistor (ambient temperature sensor) is installed in the front part of the cooler condenser assembly. This sensor is connected to the air conditioning amplifier assembly and detects fluctuations in the ambient temperature. The sensor sends a signal to the air conditioning amplifier assembly. The resistance of the cooler thermistor (ambient temperature sensor) changes in accordance with the ambient temperature. As the temperature decreases, the resistance increases. As the temperature increases, the resistance decreases.

The air conditioning amplifier assembly applies a voltage (5 V) to the cooler thermistor (ambient temperature sensor) and reads voltage changes as changes in the resistance of the cooler thermistor (ambient temperature sensor).

DTC Code DTC Detection Condition Trouble Area
B1412 An open or short in the cooler thermistor (ambient temperature sensor) circuit is detected for 8.5 minutes or more.
·

Cooler thermistor (ambient temperature sensor)

·

Harness or connector

·

Air conditioning amplifier assembly



WIRING DIAGRAM

E193111E23
1.301,1.207 1.582,1.378 0.281,0.171 10 A14 4.656,3.325 6.902,3.534 2.246,0.209 10 Air Conditioning Amplifier Assembly 1.38,0.683 1.506,0.854 0.126,0.171 10 2 2.665,0.683 2.791,0.854 0.126,0.171 10 1 5.156,0.691 5.282,0.862 0.126,0.171 10 5 5.095,2.651 5.293,2.822 0.199,0.171 10 13 5.373,0.786 5.768,0.957 0.395,0.171 10 TAM 5.373,2.747 5.781,2.918 0.407,0.171 10 SG-2 1.301,1.361 4.427,1.554 3.126,0.193 10 Cooler Thermistor (Ambient Temperature Sensor) 4.663,3.17 4.958,3.341 0.295,0.171 10 E81

PROCEDURE

1.READ VALUE USING INTELLIGENT TESTER (AMBIENT TEMP SENSOR)
a.

Use the Data List to check if the cooler thermistor (ambient temperature sensor) is functioning properly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Ambient Temp Sensor Cooler thermistor (ambient temperature sensor) /
Min: -23.3°C (-9.94°F)
Max: 65.95°C (150.71°F)
Actual ambient temperature displayed Open in the circuit: -23.3°C (-9.94°F).
Short in the circuit: 65.95°C (150.71°F).

OK:

The display is as specified in the normal condition column.


Result
Result Proceed to
OK (When troubleshooting according to problem symptoms table) A
OK (When troubleshooting according to the DTC) B
NG C



A

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

C

2.INSPECT COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)
2.INSPECT COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)
a.

Remove the cooler thermistor (ambient temperature sensor) (See page Vehicle Interior>HEATING / AIR CONDITIONING>AMBIENT TEMPERATURE SENSOR>REMOVAL).

E350077E01
2.74,2.24 2.5,1.281 2.5,1.281 2.396,1.281 false 5.146,1.698 5.292,1.271 5.292,1.271 5.458,1.271 false 2.177,1.177 2.49,1.375 0.313,0.198 10 false *a 5.521,1.177 5.833,1.375 0.313,0.198 10 false *c 4.24,0.427 4.552,0.625 0.313,0.198 10 false *b 4.531,0.427 4.844,0.625 0.313,0.198 10 false (kΩ) 4.51,2.667 4.823,2.865 0.313,0.198 10 false 10 4.49,2.844 4.802,3.042 0.313,0.198 10 false (50) 4.729,3.229 5.24,3.427 0.51,0.198 10 false °C (°F) 4.229,0.74 4.5,0.938 0.271,0.198 10 false 4.0 4.229,0.948 4.5,1.146 0.271,0.198 10 false 3.5 4.229,1.177 4.5,1.375 0.271,0.198 10 false 3.0 4.229,1.406 4.5,1.604 0.271,0.198 10 false 2.5 4.24,1.635 4.51,1.833 0.271,0.198 10 false 2.0 4.229,1.854 4.5,2.052 0.271,0.198 10 false 1.5 4.229,2.083 4.5,2.281 0.271,0.198 10 false 1.0 4.229,2.313 4.5,2.51 0.271,0.198 10 false 0.5 4.229,2.552 4.5,2.75 0.271,0.198 10 false 0.0 5.625,3.25 5.885,3.458 0.26,0.208 10 false *d 4.885,2.667 5.104,2.865 0.219,0.198 10 false 20 5.344,2.667 5.563,2.865 0.219,0.198 10 false 30 5.813,2.667 6.031,2.865 0.219,0.198 10 false 40 6.281,2.667 6.5,2.865 0.219,0.198 10 false 50 6.677,2.667 6.927,2.865 0.25,0.198 10 false 60 4.854,2.854 5.167,3.052 0.313,0.198 10 false (68) 5.302,2.844 5.615,3.042 0.313,0.198 10 false (86) 5.74,2.844 6.083,3.042 0.344,0.198 10 false (104) 6.208,2.854 6.552,3.052 0.344,0.198 10 false (122) 6.604,2.844 6.948,3.042 0.344,0.198 10 false (140)


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
15°C (59°F) 2.45 to 2.88 kΩ
20°C (68°F) 1.95 to 2.30 kΩ
25°C (77°F) 1.60 to 1.80 kΩ
30°C (86°F) 1.28 to 1.47 kΩ
35°C (95°F) 1.00 to 1.22 kΩ
40°C (104°F) 0.80 to 1.00 kΩ
45°C (113°F) 0.65 to 0.85 kΩ
50°C (122°F) 0.50 to 0.70 kΩ
55°C (131°F) 0.44 to 0.60 kΩ
60°C (140°F) 0.36 to 0.50 kΩ


Text in Illustration
*a Sensing Portion
*b Resistance
*c Allowable Range
*d Temperature

NOTICE:
·

Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.

·

When measuring, the sensor temperature must be the same as the ambient temperature.



HINT:

As the temperature increases, the resistance decreases (refer to the graph).




OK

3.CHECK HARNESS AND CONNECTOR (COOLER THERMISTOR - AIR CONDITIONING AMPLIFIER)

NG

REPLACE COOLER THERMISTOR (AMBIENT TEMPERATURE SENSOR)

3.CHECK HARNESS AND CONNECTOR (COOLER THERMISTOR - AIR CONDITIONING AMPLIFIER)
a.

Disconnect the A14 cooler thermistor (ambient temperature sensor) connector.


b.

Disconnect the E81 air conditioning amplifier assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A14-1 - E81-5 (TAM) Always Below 1 Ω
A14-2 - E81-13 (SG-2)
E81-5 (TAM) - Body ground Always 10 kΩ or higher
E81-13 (SG-2) - Body ground




OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR