Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255703 AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)  B1446  Air Mix Damper Control Servo Motor Circuit (Driver Side)  


DESCRIPTION

The No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air mix damper to any position. As a result, the air mix damper varies the mixture of hot air from the heater core and cold air from the evaporator so that the temperature of the air is as requested.

HINT:

Confirm that no mechanical problem is present because this trouble code may be stored when either a damper link or damper is mechanically locked.


DTC Code DTC Detection Condition Trouble Area
B1446 The air mix damper position does not change for 30 seconds or more when the air conditioning amplifier assembly operates the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo).
·

No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo)

·

Air conditioning harness assembly

·

Air conditioning amplifier assembly



WIRING DIAGRAM

E350098E04
3.135,1.083 3.448,1.281 0.313,0.198 10 false IC 5.313,0.385 5.49,0.615 0.177,0.229 10 false 4 5.302,0.958 5.479,1.188 0.177,0.229 10 false 3 5.323,1.51 5.5,1.74 0.177,0.229 10 false 2 5.573,0.51 6.063,0.708 0.49,0.198 10 false B BUS 5.552,1.052 6.042,1.25 0.49,0.198 10 false BUS 5.552,1.573 6.042,1.771 0.49,0.198 10 false BUS G 0.104,2.094 2.823,2.479 2.719,0.385 10 false No. 1 Air Conditioning Radiator Damper Servo Sub-assembly (Air Mix Damper Servo) 3.031,2.083 5.313,2.323 2.281,0.24 10 false Air Conditioning Harness Assembly 5.594,2.021 5.958,2.219 0.365,0.198 10 false z54 5.583,2.198 6.813,2.594 1.229,0.396 10 false Air Conditioning Amplifier Assembly

PROCEDURE

1.READ VALUE USING INTELLIGENT TESTER (AIR MIX SERVO TARG PULSE [D])
a.

Use the Data List to check if the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo) is functioning properly (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)>DATA LIST / ACTIVE TEST).

Air Conditioner
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Air Mix Servo Targ Pulse (D) No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo) target pulse / Min.: 0, Max.: 255
for LHD
·

MAX. COOL: 90 (pulse)

·

MAX. HOT: 8 (pulse)


for RHD
·

MAX. COOL: 8 (pulse)

·

MAX. HOT: 90 (pulse)


-

OK:

The display is as specified in the normal condition column.


Result
Result Proceed to
OK (When troubleshooting according to the DTC) A
OK (When troubleshooting according to problem symptoms table) B
NG C



A

2.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX DAMPER SERVO)

B

C

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

2.REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (AIR MIX DAMPER SERVO)
a.

Temporarily replace the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo).


HINT:

Since the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo) cannot be inspected while it is removed from the vehicle, replace the No. 1 air conditioning radiator damper servo sub-assembly (air mix damper servo) with a new or normally functioning one.




c.

Check for DTCs (See page Vehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Manual Air Conditioning System)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC B1446 is not output A
DTC B1446 is output B



A

END (NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY [AIR MIX DAMPER SERVO] IS FAULTY)

B

3.REPLACE AIR CONDITIONING HARNESS ASSEMBLY
3.REPLACE AIR CONDITIONING HARNESS ASSEMBLY

A

END (AIR CONDITIONING HARNESS ASSEMBLY IS FAULTY)

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY