Use the same procedures for the LHD vehicle and RHD vehicle.
The procedures listed below are for the LHD vehicle.
84453
1.INSTALL IDLE UP SWITCH
Attach the 2 claws to install the idle up switch.
55432D
2.INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
55606
3.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
55475A
4.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55474C
5.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55403C
6.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55449C
7.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION