Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
55449C
1.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55403C
2.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55448A
3.REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
55402C
4.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
55406B
5.REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
85530E
6.REMOVE POWER OUTLET SOCKET ASSEMBLY
Rotate the socket to disengage the notch.
Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover. Then remove the power outlet socket.
85535E
7.REMOVE POWER OUTLET SOCKET COVER NO.2
Detach the 2 claws and remove the cover.