Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
71200S
3.REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
71200S
4.REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
55449C
5.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
55403C
6.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
55448A
7.REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION
55402C
8.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
33504F
9.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
55406B
10.REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
58803C
11.REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
58821C
12.REMOVE UPPER CONSOLE PANEL
58805C
13.REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
58804A
14.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
88891H
15.REMOVE NO. 1 COOLER COVER
Detach the clamp on the lower part of the cooler cover, and then pull the cooler cover upward to remove it.
58903A
16.REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
88520
17.REMOVE COOLING BOX ASSEMBLY
Remove the 4 bolts and 2 screws.
Remove the 2 bolts and disconnect the 2 cooler pipes.
Remove the 2 O-rings from the 2 cooler pipes.
Disconnect the connector.
Detach the 2 claws and remove the cooling box assembly.