Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows)
RM2660E _59 Vehicle Exterior _052850 WINDOW / GLASS _0255725 POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows) J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on 4 Windows)  Jam Protection Function does not Operate  


DESCRIPTION

This symptom may occur to all door windows.

The jam protection function operates within a specified range during the manual up or auto up operation.


PROCEDURE

1.PERFORM INITIALIZATION

OK

2.CHECK JAM PROTECTION FUNCTION OPERATING RANGE

NG

END (PROBLEM DUE TO INITIALIZATION FAILURE)

2.CHECK JAM PROTECTION FUNCTION OPERATING RANGE
a.

Check if the jam protection function operates for applicable power window.

HINT:

The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.157 in.) below that.


OK:

Jam protection function operates.


Result
Result Proceed to
OK A
NG (Front LH side power window) B
NG (Front RH side power window) C
NG (Rear power window LH) D
NG (Rear power window RH) E



A

END

B

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

C

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

D

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

E

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH