Home › Vehicle Exterior › WINDOW / GLASS › QUARTER WINDOW GLASS
RM2660E _59 Vehicle Exterior _052850 WINDOW / GLASS _0255732 QUARTER WINDOW GLASS A

WINDOW / GLASS  QUARTER WINDOW GLASS  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 63310 1.REMOVE ROOF HEADLINING ASSEMBLY (w/o Sliding Roof)

Hide 63310 2.REMOVE ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)

Hide 62720A 3.REMOVE QUARTER WINDOW ASSEMBLY

B180608E02
1.417,1.792 1.417,2.021 1.417,2.021 1.677,2.021 false 1.781,3.927 1.781,4.25 1.781,4.25 1.948,4.25 false 1.75,1.927 2.823,2.156 1.073,0.229 10 false Protective Tape 2.021,4.188 2.781,4.417 0.76,0.229 10 false Piano Wire

HINT:

Apply protective tape to the outer surface of the vehicle body to prevent scratches.


NOTICE:

When separating the quarter window glass from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.


a.

Disconnect the connectors.


b.

From the interior, insert a piano wire between the vehicle body and the quarter window glass as shown in the illustration.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Cut through the adhesive by pulling the piano wire around the quarter window glass.

NOTICE:

Leave as much adhesive on the vehicle body as possible when removing the quarter window glass.



e.

Using suction cups, remove the quarter window glass.


Hide 4.CLEAN VEHICLE BODY

B106081E37
0.406,1.365 0.406,0.229 false 2.198,1.479 2.198,0.229 false 0.875,1.531 0.958,1.708 false 2.073,1.688 1.854,1.74 false 0.146,0.063 0.844,0.26 0.698,0.198 10 false Adhesive 1.906,0.042 2.604,0.24 0.698,0.198 10 false Adhesive 0.792,1.771 1.635,2 0.844,0.229 10 false Vehicle Body

a.

Clean and shape the contact surface of the vehicle body.

i.

On the contact surface of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.

HINT:

Leave as much adhesive on the vehicle body as possible.


NOTICE:

Be careful not to damage the vehicle body.



ii.

Clean the contact surface of the vehicle body with cleaner.

HINT:

Even if all the adhesive has been removed, clean the vehicle body.